dji DJP4PP20NA Phantom 4 Pro+ Version 2.0 Quadcopter User Guide
- June 6, 2024
- DJi
Table of Contents
dji DJP4PP20NA Phantom 4 Pro+ Version 2.0 Quadcopter
Phantom 4 Pro+ V2.0
The DJI PHANTOMTM 4 Pro+ V2.0 is a smart prosumer flying camera capable of
shooting 4K video at 60 fps and at up to 100 Mbps, and capturing 20 megapixel
stills. 4 directions of obstacle avoidance allow it to intelligently avoid
obstacles during flight. Using TapFlyTM and ActiveTrackTM through the DJI GOTM
4 app, you can fly anywhere visible on your screen or track a moving subject
smoothly and easily with a simple tap. The camera uses a 1-inch CMOS sensor
offering unprecedented clarity, lower noise, and better quality images.
In addition to the above features, improved propulsion system efficiency means
aircraft noise is 4dB (60%) lower than on the Phantom 4 Pro+.
- Gimbal and Camera
- Downward Vision System*
- Micro USB Port
- Camera/Linking Status Indicator and Link Button
- Camera Micro SD Card Slot
- Forward Vision System
- Infrared Sensing System*
- Front LEDs
- Motors
- Propellers
- Aircraft Status Indicators
- Antennas
- Rear Vision System
- Intelligent Flight Battery
- Power Button
- Battery Level Indicators
The Vision and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorials in the DJI GO 4 app or on the official DJI website to learn more. http://www.dji.com/phantom-4-pro-v2
Remote Controller
The powerful remote controller of the Phantom 4 Pro+ V2.0 has a transmission
range extending up to 6.2 mi (10 km)*. It features physical buttons and dials
to control exposure, camera tilt, photo capture, and video recording.
Built into the remote controller is DJI’s latest long-range transmission
technology OCUSYNCTM, providing a live HD view from the Phantom’s camera
directly on the display. Dual frequency support makes the HD video downlink
more stable.
- Power Button
- Return-to-Home (RTH) Button
- Control Sticks
- Speaker
- Status LED
- Battery Level LEDs
- Power Port
- Display Screen
- Sleep/Wake Button
- Microphone
- Antennas
- Handle Bar
- Gimbal Dial
- Camera Settings Dial
- Record Button
- Flight Mode Switch
- Shutter Button
- Intelligent Flight Pause Button
- C1 and C2 Buttons (customizable)
- Micro USB Port
- HDMI Port
- Micro-SD Card Slot
- USB Port
The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt.
The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic Interference, and at an altitude of about 400 feet (120 meters).
Using Phantom 4 Pro+ V2.0
-
Watch the Tutorial Videos
Watch the tutorial videos at www.dji.com or in the DJI GO 4 app. -
Check the Battery Levels
Press once to check the battery level. Press once, then again and hold to turn on/off. -
Charge the Batteries
When charging is complete, the battery level indicators will automatically turn off. -
Prepare the Remote Controller
-
Prepare for Takeoff
First-time activation requires your DJI account and internet connection.
-
Flight
Ready to Go (GPS) Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app indicates ‘Ready to Go (GPS)’ or ‘Ready to Go (Vision)’ if flying indoors.
In the DJI GO 4 App:
Auto Takeoff
The aircraft will take off and hover at an altitude of 4 feet (1.2 meters).
Return-to-Home (RTH)
Bring the aircraft back to the Home Point. Tap again to stop the procedure.
TapFly
Tap on your screen to fly your Phantom in that direction, avoiding obstacles
as it flies.
Auto Landing
The aircraft will land vertically and stop its motors.
Normal
You are in control of the Phantom, with satellite and Return-to-Home support.
ActiveTrack
Mark an object on your screen to track it as it moves.
- Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.
- Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.
Specifications
-
Aircraft
Weight (Battery & Propellers Included) 1375 g
Max Ascent Speed S-mode: 6 m/s; P-mode: 5 m/s
Max Descent Speed S-mode: 4 m/s; P-mode: 3 m/s
Max Speed 45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode); 31 mph (50 kph) (P-mode)
Max Service Ceiling Above Sea Level 19685 ft (6000 m)
Max Flight Time Approx. 30 minutes
Operating Temperature 32° to 104° F ( 0° to 40° C)
GNSS GPS+GLONASS
Operating Frequency 2.400 – 2.483 GHz and 5.725 – 5.850 GHz
Transmitter Power (EIRP) 2.4 GHz: ≤26 dBm (FCC); ≤20 dBm (CE); ≤20 dBm (SRRC)
5.8 GHz: ≤26 dBm (FCC); ≤14 dBm (CE); ≤26 dBm (SRRC)
Hover Accuracy Range Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning)
Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning) -
Gimbal
Controllable Range Pitch: -90° to +30° -
Vision System
Velocity Range ≤31 mph (50 kph) at 6.6 ft (2 m) above ground
Altitude Range 0 – 33 ft (0 – 10 m)
Operating Range 0 – 33 ft (0 – 10 m)
Obstacle Sensory Range 2 – 98 ft (0.7 – 30 m)
Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux) -
Infrared Sensing System
Obstacle Sensory Range 0.6 – 23 ft (0.2 – 7 m)
Operating Environment Surface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.) -
Camera
Sensor 1’’ CMOS; Effective pixels: 20M
Lens FOV (Field of View) 84°, 8.8 mm (35 mm format equivalent: 24 mm), f/2.8 – f/11, auto focus at 1 m – ∞
ISO Range Video: 100 – 3200 (Auto); 100 – 6400 (Manual); Photo: 100 – 3200 (Auto); 100 – 12800 (Manual)
Mechanical Shutter 8 – 1/2000 s
Electronic Shutter 8 – 1/8000 s
Max Image Size 3:2 Aspect Ratio: 5472×3648; 4:3 Aspect Ratio: 4864×3648; 16:9 Aspect Ratio: 5472×3078
Still Photography Modes Single Shot
Burst Shooting: 3/5/7/10/14 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias
Interval: 2/3/5/7/10/15/30/60 s
Video Recording Modes H.265 H.264
・C4K: 4096×2160 24/25/30p ・C4K: 4096×2160 24/25/30/48/50/60p
・4K: 3840×2160 24/25/30p ・4K: 3840×2160 24/25/30/48/50/60p
・2.7K: 2720×1530 24/25/30/48/50/60p ・2.7K: 2720×1530 24/25/30/48/50/60p
・FHD: 1920×1080 24/25/30/48/50/60/120p ・FHD: 1920×1080 24/25/30/48/50/60/120p
・HD: 1280×720 24/25/30/48/50/60/120p ・HD: 1280×720 24/25/30/48/50/60/120p
Video Storage Bitrate 100 Mbps
Supported File Systems FAT32 (≤ 32 GB); exFAT (> 32 GB)
Photo JPEG, RAW (DNG), JPEG + RAW
Video MP4/MOV (AVC/H.264; HEVC/H.265)
Supported SD Cards Micro SD, Max Capacity: 128 GB. Class 10 or UHS-1 rating required
Operating Temperature 32° to 104° F (0° to 40° C) -
Remote Controller
Operating Frequency 2.400 – 2.483 GHz and 5.725 – 5.850 GHz
Max Transmission Distance 2.4 GHz: 10 km (FCC); 6 km (CE); 6 km (SRRC)
(Unobstructed, free of interference) 5.8 GHz: 10 km (FCC); 6 km (CE); 6 km (SRRC)
Operating Temperature 32° – 104° F (0° – 40° C)
Battery 6000 mAh LiPo 2S
Transmitter Power (EIRP) 2.4 GHz: ≤26 dBm (FCC); ≤20 dBm (CE); ≤20 dBm (SRRC）
5.8 GHz: ≤26 dBm (FCC); ≤14 dBm (CE); ≤20 dBm (SRRC）
Operating Voltage 1.2 A @ 7.4 V
Built-in Display Device 5.5 inch screen, 1920×1080, 1000 cd/m2
Android system, 4G RAM＋16G ROM -
Charger
Voltage 17.4 V
Rated Power 100 W -
Intelligent Flight Battery (PH4-5870mAh-15.2V)
Capacity 5870 mAh
Voltage 15.2 V
Battery Type LiPo 4S
Energy 89.2 Wh
Net Weight 468 g
Charging Temperature Range 41° to 104° F (5° to 40° C)
Max Charging Power 100 W
Download the user manual for more information:
http://www.dji.com/phantom-4-pro-v2
This Quick Start Guide is subject to change without prior notice.
DJI incorporates HDMITM technology.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
PHANTOM is a trademark of DJI.
Copyright © 2021 DJI All Rights Reserved.