SALUS ZigBee Network Signal Repeater RE10RF Installation Guide
- June 6, 2024
- SALUS
Table of Contents
ZigBee network signal repeater
Model: RE10RF
Installation Manual
Introduction
RE10RF repeater is a device that increases ZigBee network signal range for SALUS iT600 system devices. RE10RF is helpful at installations where barriers like long distances, thick walls, metal elements, or others can worsen wireless connectivity. PDF a version of this manual can be found on our website: www.salus-controls.eu
Product Compliance
This product meets the following directive
- Electromagnetic Directive 2004/108/EC
- Low Voltage Directive 2006/95/EC
Full information is available on the website www.saluslegal.com
Safety Information
Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition. Product for indoor use only. Installation must be carried out by a qualified person in accordance to national and EU regulations.
Installation
|
---|---
RE10RF pairing in Online mode
(with an Internet connection using the SALUS Smart Home app)
| 
---|---
RE10RF pairing in Offline mode
(without an Internet connection)
WARNING!
Do not use CO10RF coordinator with UGE600 simultaneously.
Identification process of the paired devices
To check which devices are paired with your iT600 system, press the CO10RF or
UGE600 button. When CO10RF or UGE600 LED diode flashes green – then each
correctly paired device will show appropriate
information. Wait 10 minutes for the process to finish automatically or press
the CO10RF or UGE600 button again to finish it manually.
Factory reset
Press and hold 15 seconds the RE10RF button. When the process is finished, the LED diode will be solid red.
Importer:
SALUS Controls Plc
Units 8-10 Northfield Business Park
Forge Way, Parkgate, Rotherham
S60 1SD, United Kingdom
DISTRIBUTOR OF SALUS CONTROLS:
QL CONTROLS Sp. z o.o., Sp.k.
Rolna 4, 43-262 Kobielice, Poland
www.salus-controls.eu
SALUS Controls is a member of the Computime Group.
Maintaining a policy of continuous product development
SALUS Controls plc reserve the right to change
specification, design, and materials of products listed in
this brochure without prior notice.
Issue date:
05/2020 V001
V 2020