AE40105 Enduro Sendero HD Pickup Truck Body

SENDERO HD PICK-UP TRUCK BODY
OWNERS BUILD MANUAL

02

33.657120,-117.701139

Associated Electrics, Inc. 21062 Bake Parkway Lake Forest, CA 92630
Customer Service Tel: 949.544.7500 Fax: 949.544.7501

INTRODUCTION
Thank you for purchasing this Element RC product. This assembly manual contains instructions and tips for building and maintaining your new Enduro chassis. Please take a moment to read through this manual to help familiarize yourself with these steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.

Follow Us On Social Media

ElementRC

@Element_RC

www.ElementRC.com
AE is a Registered Trademark of Associated Electrics, Inc. TEAM ASSOCIATED is a Registered Trademark of Associated Electrics, Inc.
REEDY is a Registered Trademark of Associated Electrics, Inc. FACTORY TEAM is a Registered Trademark of Associated Electrics, Inc.
ELEMENT TM is a Trademark of Associated Electrics, Inc. AREA 51 is a Registered Trademark of Associated Electrics, Inc. STEALTH is a Registered Trademark of Associated Electrics, Inc. GREEN SLIME is a Registered Trademark of Associated Electrics, Inc.

ENDURO TRAIL TRUCK
A performance rig built to endure. When hitting the trail, you want to do it with confidence and the answer is the all new Enduro Trail Truck!
At the heart of the Enduro is our revolutionary Stealth® X gearbox. Although the exterior appears to have a conventional 3-gear transmission look, the inside is far from conventional.The Stealth® X features the ability to adjust the rear drive ratio independently of the front drive across three levels: stock overdrives the front end 5.7% (installed in RTR), option 1 provides a one-to-one drive ratio front-to-rear (available separately), and option 2 overdrives the front end 11.83% (included with RTR). Feeding the power to the tires are 3-piece telescopic driveshafts with an extruded aluminum center section, universal front drive axles, and hardened steel ring and pinion gears. With the Enduro drivetrain, delivering useful power will not be an issue.
We relocated the steering link assembly from the conventional location, to behind the axle (BTA).This feature greatly improves approach angle and front end clearance, making rough terrain much easier to handle.
The Enduro Trail Truck comes ready for adventure right out of the box, with performance-driven Reedy Power electronics.The all-new, ultra-smooth and powerful, 16-turn 5-slot brushed crawler motor and Reedy Power SC480X electronic speed controller with T-plug connector, supply ample power to this tough rig. Controlling the beast on the trail is our 3-channel XP130 2.4GHz radio and Reedy Power high-torque 1320MG metal gear servo.
With all this packed in one box, we know the Enduro Trail Truck is ready for the trail… Are you?

ITEMS NEEDED The following items are required to build or maintain your Enduro Trail Truck.
· 1.5mm Allen Wrench (#1500) · 2mm Allen Wrench (#1501) · 2.5mm Allen Wrench (#1503) · Pliers · Long Nose Pliers · 5.5mm Nut Driver (#1507) · 7mm Nut Driver (#1508)
OTHER HELPFUL ITEMS The following items aren’t required, but will aid in the building and maintaining of your Enduro Trail Truck.
· Threadlock (#1596) · Green Slime (#1105)

FEATURES
· Stealth X Gearbox with adjustable overdrive gears
· BTA steering [Behind the Axle] · CMS [Chassis Mounted Servo] · Integrated servo winch mount · Adjustable front track bar · Universal front drive axles · Stamped steel C-Channel frame
rails · Enclosed receiver box · 12mm wheel hexes · Adjustable front and rear bumper
mounts · Adjustable width rock sliders · Two battery boxes (Shorty and
regular size!) · Threaded aluminum shock bodies · Aluminum steering plates · Aluminum motor plate · Adjustable body posts · Optimized rod ends for more fluid
axle articulation

· Adjustable rear shock mount positions
· Telescopic driveshaft’s front and rear
· Extruded aluminum driveshaft splines
· One-piece rear axle design · Splined front axle with adjustable
caster · Machined input pinion gear · Metal ring gear · Machined steel top shaft · Metal idler gears · Heavy duty 5mm diameter steel
links · Precision metal ball bearings
included · Steel servo horn · Licensed 1.9″x4.65″ General
Grabber X3 tires

ELECTRONICS:
· Water resistant 2S-3S LiPo compatible Reedy SC480X brushed electronic speed control with adjustable drag brake and T-plug battery connector
· Smooth and powerful Reedy Crawler 16T 5-slot brushed motor
· XP130 2.4GHz radio system (3 Channel)
· Reedy high-torque 1320MG metal gear servo (13kg/180 oz.)
SENDERO BODY FEATURES:
· Sendero body thermoformed in high-strength polycarbonate
· Two-piece cab and bed design · Clear windows · Molded grill · Replaceable headlight lenses · Pivoting side mirrors · LED headlights · Adjustable front bumper

03 33.657120, -117.701139

HARDWARE 1:1 SCALE VIEW HARDWARE USED WITH OPTIONAL REPLACEMENT PART NUMBERS

FLAT HEAD SCREWS (FHCS) 2.5x10mm (31350)

SOCKET HEAD SCREWS (SHCS)
2x5mm (31511) Aluminum (8566)

SHIMS AND WASHERS .250x.125x.015 (7337)

2.5x14mm (41077)

2x8mm (7187)

Servo Horn Spacer (42041)

3x8mm (25201) 3x10mm (25202) 3x12mm (25203)

2.5x6mm (41079)

Drive Gear Shim (42027)

2.5×10 (41087) 2.5×14 (71032)

MISC. SCREWS Shoulder Screw 3x4x10mm (42070)

3x14mm (89208)
BUTTON HEAD SCREWS (BHCS) 2.6x10mm (41088)
Self Tapping Thread
3x5mm (31530)
3x6mm (31531)
3x8mm (31532) Aluminum (8552)
3x10mm (25211) Aluminum (8554)

SET SCREWS

2.5×16 (41086)
3x3mm (25225) 3x16mm (4689)

Screw Pin (42022) Pin 2x11mm (42019)

PIVOT BALLS

LINKS

Pivot Ball, Short (42041)

Pivot Ball, Long, Upper Shock (42041)

LOCK NUTS

M3 Locknuts (25215) Aluminum (31550)

114mm 108mm 100mm 96mm 93mm
83mm
73mm

3x12mm (89202)

M4 Locknut W/Flange (25391)

3x14mm (25187)

BEARINGS

3x16mm (89203)

5x10x4mm (91560)

3x18mm (2308)

7x14x3.5mm (91474)

3x20mm (25188) 3x28mm (41078)

10x15x4mm (91563)

04
TABLE OF CONTENTS
01 COVER 02 INTRODUCTION 03 1:1 HARDWARE “FOLD OUT” 04 TABLE OF CONTENTS 05 CHASSIS BUILD (BAG 1, 2) 06 ELECTRONIC MOUNTS BUILD (BAG 3) 07 GEARBOX BUILD (BAG 4) 08 FRONT AXLES BUILD (BAG 5) 09 REAR AXLES BUILD (BAG 6) 09 LINKS BUILD (BAG 7)

33.657120, -117.701139
10/15/2020
12 DRIVESHAFTS BUILD (BAG 8) 13 SHOCKS BUILD (BAG 9) 14 BUMPERS BUILD (BAG 10) 14 WHEELS/TIRES BUILD 15 BODY BUILD (BAG 11) 16 CATALOG 24 OPTIONAL GEARBOX BUILD 25 TRAIL TIPS 26 BACK COVER

USING THIS MANUAL

This symbol indicates a special note or instruction in the manual.

x2

This symbol indicates the number of

the same part that is required.

2

This symbol indicates the order within a step to assemble parts.

This symbol indicates a Trail Tip.

BLA#C6K58GR8EASE

This symbol indicates where Black Grease should be applied.

GR#E1E1N0S5LIME

This symbol indicates where Green Slime can be applied. *not included

TH#R1E5A9D6LOCK SH#O5C4K2F2LUID

This symbol indicates where Thread Lock Adhesive should be applied. *not included
This symbol indicates where Shock Fluid should be applied.

There is a 1:1 hardware foldout page in the front of the manual. To check the size of a part, line up your hardware with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.

YOUR BUILD BEGINS HERE.

05

GATE 01

CHASSIS BUILD: BAG 1, 2

31531 x1
3x6mm
BHCS

25211 x2
3x10mm
BHCS

x2 25211
3x10mm
BHCS

31532 x1
3x8mm
BHCS

42002 x1
Battery
Mount

x1 42000
Chassis Rail
Left

x1 42001
Bumper Mount
Rear

GATE 02 CHASSIS BUILD: BAG 1, 2

x1 42001

Bumper Mount 31532 x1

Front

3x8mm

BHCS

25211 x2
3x10mm

BHCS

31532 x1
3x8mm
BHCS

89208 x4
3x14mm FHCS
x1 42006
Floor Board

42005 x1
Shock Mount
(Left, Rear)

x1 42002
Chassis Brace
Rear

x1 42005
Shock Mount (Left, Front)
x1 42004
Servo Mount
x1 42004
Gearbox Mount

GATE 03 CHASSIS BUILD: BAG 1, 2

x2 25211
3x10mm
BHCS

x1 42000
Chassis Rail
Right

x2 25211

3x10mm

x1 31531

BHCS

3x6mm

BHCS

x1 31532
3x8mm
BHCS

x1 42005
Shock Mount
(Right, Front)

NOTE: Install Left and Right side Rock Sliders

42005 x1
Shock Mount
(Right, Rear)

x4 89208
3x14mm
FHCS

x1 42006
Floor Board
x1 31532
3x8mm
BHCS
x2 25211
3x10mm
BHCS
x1 31532
3x8mm
BHCS

89202 x2
3x12mm
BHCS

x1 42245
Trailrunner
Rock Slider

06

GATE 01
25203 x4
3x12mm FHCS

ELECTRONIC MOUNTS BUILD: BAG 3
NOTE: There is an optional “standard pack” sized battery tray included!

42003 x1
Battery Box,
Shorty Pack

71050 x2
Hook and
Loop Straps

GATE 02 ELECTRONIC MOUNTS BUILD: BAG 3
x1 Receiver

42007 x1
Receiver
Grommet

x1 6727
Servo Tape

42007 x1
Receiver Grommet
Plug

x1 42006
Receiver Box Bottom
x4 25202
3x10mm FHCS

Servo x1
42215 x1
Servo Horn 25T
THREAD LOCK #1596

x4 41090
3x10mm LP SHCS
x1 25211
3x10mm BHCS

GATE 03 ELECTRONIC MOUNTS BUILD: BAG 3
ESC x1
6727 x1
Servo Tape

6338 x1
Antenna Tube and Cap
25202 x4
3x10mm FHCS
42006 x1
Receiver Box Lid

x1 25225
3x3mm
Set Screw

x1 42007
Receiver Box
Grommet

33.657120, -117.701139

07

BL#A6C5K8G8REASE

GATE 01 GEARBOX BUILD: BAG 4

x1 42028
Stealth X Gearbox
Drive Gear, 53T

BLACK GREASE #6588
x4 41077
2.5x14mm FHCS

x4 31350
2.5x10mm
FHCS

91563 x2

x1 42027

10x15x4mm

Stealth X Gearbox Bearing

Outdrive, Long

x1 42027

Stealth X Gearbox

x1 42027

Outdrive, Short

Stealth X Gearbox

Drive Gear Shim

x1
NOTE: Make sure the 10x15x4mm bearing is completely seated in the short outdrive

42028 Stealth X Gearbox Drive Gear, 52T

GATE 02
42025 x2
Idler Shaft Pin 2x9mm

GEARBOX BUILD: BAG 4
x1 42026
Stealth X Gearbox Idler Gear, 28T

41078 x5
3x28mm
BHCS

NOTE: There are optional gearbox builds on page 24

42025 x1
Stealth X Gearbox Idler Shaft
42026 x1
Stealth X Gearbox Idler Gear, 27T

42030 x1
Stealth X Gearbox Top Shaft, Rear
91560 x4
5x10x4mm Bearing

x1 42023

Stealth X Gearbox 20T 28T

52T

Case
x2 91563

27T

53T

10x15x4mm

Bearing

x1 42023
Stealth X Gearbox
Case

Over Drive Option 1 (Stock)

GATE 03 GEARBOX BUILD: BAG 4

42029 x1
Stealth X Gearbox Motor Plate
x3 25201
3x8mm FHCS

42023 x2
Stealth X Gearbox Spur Gear Hub
25391 x1
FT M4 Locknut

41090 x2
3x10mm
LP SHCS

Motor x1

x1 9654
Spur Gear
48P, 87T

08
GATE 04 GEARBOX BUILD: BAG 4

42023 x1
Stealth X Gearbox
Gear Cover

1336 x1
Pinion Gear
18T

31530 x2
3x5mm
BHCS

x1 25225
3x3mm Set Screw
NOTE: Make sure the gear mesh between the spur gear and pinion has a slight amount of movement between the two gears.

GATE 01 FRONT AXLE BUILD: BAG 5

91560 x2
5x10x4mm
Bearing

41086 x4
2.5x16mm
SHCS

91474 x2
7x14x3.5mm
Bearing

BL#A6CK58G8REASE

42060 x1
Axle Housing
Differential Cover

x1 42066
Pinion Gear, 8T
x1 42065
Ring Gear, 30T

GATE 02 FRONT AXLE BUILD: BAG 5
NOTE: Tighten the caster block clamp until the screw is flush with the end!

x1 42061
Axle Housing,
Front

89208 x2
3x14mm FHCS
NOTE: Align the two arrows when installing the caster block!

71032 x2
2.5x14mm
SHCS

x2 25201
3x8mm FHCS
x1 91560
5x10x4mm Bearing
42062 x1
Caster Block, Left
NOTE: Install Left and right side caster blocks and bearings
x1 42060
Lower 4-Link Mount
x2 42070
3x4x10mm Shoulder Screw

25187 x1
3x14mm
BHCS

42067 x1
Universal

NOTE: Install left and right side steering blocks and universals

42062 x1
Steering
Block

x1 91563
10x15x4mm Bearing
x1 91560
5x10x4mm Bearing

NOTE: Install left and right side axle mounts and shoulder screws

33.657120, -117.701139

09

GATE 03 FRONT AXLE BUILD: BAG 5
x4 25211
3x10mm BHCS

x1 42064
Steering Block Arm,
BTA, Right

x1 42064
Steering Block Arm,
BTA, Left

x1 42019
Wheel Hex
Pin, 2x11mm

NOTE: Install left and right side wheel hexes

x1 42069
Wheel Hex,
6mm

GATE 01

REAR AXLE BUILD: BAG 6

91474 x2
7x14x3.5mm
Bearing

42065 x1
Ring Gear,
30T

x1 42060
Axle Housing,
Differential Cover

x4 41086
2.5x16mm,
SHCS

x2 91560
5x10x4mm
Bearing

BL#A6C5K8G8REASE
x1 42066
Pinion Gear, 8T
x1 42061
Axle Housing, Rear

GATE 02 REAR AXLE BUILD: BAG 6

NOTE: Install left and right side drive shafts

x1 42068
Drive Shaft,
Rear

x1 91560
5x10x4mm Bearing
x2 41089
3x6mm LP BHCS

GATE 01 LINKS BUILD: BAG 7

x2 42041
Pivot Ball, 6mm
BLA#C6K5G8R8EASE
x2 42040
Rod End, Curved

x1 42043
Link,
83mm

25187 x1
3x14mm BHCS
BLAC#K6G5R8E8ASE

71032 x2
2.5x14mm
SHCS

x1 42019
Pin,
2x11mm

x1 42060
Lower 4-Link Mount
NOTE: Install left and right side axle mounts and wheel hexes

x1 42069
Wheel Hex,
6mm

112.50mm

89203 x1
3x16mm
BHCS

10

GATE 02 LINKS BUILD: BAG 7

x2 42041

Pivot 6mm

Ball,

BLACK#6G5R8EA8SE

x1

x2 42040
Rod End,
Curved

42043 Link, 83mm

BLACK#6G5R8EA8SE

NOTE: Install servo link screw #2308 in outermost hole in servo horn.
25187 x1
3x14mm BHCS

NOTE: Check the rod end angles before installation
102.20mm
GATE 03 LINKS BUILD: BAG 7

25215 x1
M3 Locknut,
Black

2308 x1
3x18mm
BHCS

x2 42040

Rod End, Curved

BLACK#6G5R8EA8SE

BLACK GREASE #6588
x1 42043
Link, 93mm

25188 x1
3x20mm,
BHCS

x2 42041
Pivot Ball,
6mm

122.00mm

NOTE: Check the rod end angles before installation

25215 x2
M3 Locknut,
Black

GATE 04 LINKS BUILD: BAG 7

x2 42041

Pivot Ball,

6mm

BLACK GREASE #6588

x2 42040
Rod End,
Straight

x1 42043
Link,
BLACK#6G5R8EA8SE

25187 x2
3x14mm,
BHCS

154.50mm

25215 x2
M3 Locknut,
Black

x1 42260
3x7mm Spacer
41078 x1
3x28mm, BHCS
x1 42041
Pivot Ball, 6mm

33.657120, -117.701139

GATE 05 LINKS BUILD: BAG 7
x2 42041
Pivot Ball, 6mm
BLACK GREASE #6588

NOTE: Build and install two rear upper links

x2 42040
Rod End,
Curved

x1 42044
Link, 108mm
BLACK GREASE #6588

NOTE: Check the rod end angles before installation
137.00mm

GATE 06 LINKS BUILD: BAG 7

x2 42041
Pivot Ball,
6mm

NOTE: Build and install two front lower links

BLACK GREASE #6588

x2 42040
Rod End,
Curved

x1 42043
Link, 100mm
BLACK GREASE #6588

NOTE: Check the rod end angles before installation

129.50mm

25215 x2
M3 Locknut,
Black

GATE 07

LINKS BUILD: BAG 7
x2 42041
Pivot Ball, 6mm

BLACK GREASE #6588

NOTE: Build and install two rear lower links

4689 x1
3x16mm,
Set Screw

x2 42040
Rod End,
Curved

x1 42044
Link, 114mm
BLACK GREASE #6588

NOTE: Check the rod end angles before installation

143.00mm

25187 x1
3x14mm
BHCS

11
x1 25188
3x20mm, BHCS
41078 x1
3x28mm BHCS
x1 25187
3x14mm, BHCS
x1 4689
3x16mm, Set Screw

12

GATE 01 DRIVE SHAFT BUILD: BAG 8

x2 42021
Pin,
2x11mm

x1 42020
Drive Shaft, Female
(33mm, 42mm)

x2

31532 3x8mm BHCS

42021 x2
Drive Shaft,
Male, CVA

THRE#A1D5L9O6CK THRE#A1D5L9O6CK

x2 42021
Drive Shaft,
Female, CVA

x2 42021
Drive Shaft
Barrel

Female 1 Female 2
Male

Drive Shaft Lengths

Front (mm) 33 33 48

Rear (mm) 33 42 60

x1 42020
Pin Retainer,
Short

GATE 02 DRIVESHAFT BUILD: BAG 8

x1 42020
Drive Shaft, Male
(48mm, 60mm)

42020 Gearbox Side
42020 Axle Side
x1 42020
Pin Retainer, Long
NOTE: Build a front and rear drive shaft

NOTE: Install the front drive shaft
GATE 03 DRIVESHAFT BUILD: BAG 8
NOTE: Make sure the screw pins are aligned with each female CVA during assembly

TH#R1E5A9D 6LOCK

FRONT 33
48 33

THRE#A1D5L9O6CK

42022 x4
Screw Pin

NOTE: Install the rear drive shaft

NOTE: Make sure the phasing of the drive shafts is correct when installing them to the axles and gearbox.
Correct Phasing

Incorrect Phasing

42

REAR

60 33

THREAD LOCK #1596

TH#R1E5A9D6LOCK

33.657120, -117.701139

13

GATE 01 SHOCK BUILD: BAG 9

x1 42081
Shock
Piston

SHOCK CAP O-RING
SHOCK COLLAR O-RING

x2 6299
E-Clip
x1 42083
Shock Shaft, 3x30mm

SH#O5C4K 2F2LUID
SH#O5C4K 2F2LUID
Pro Tip: Use #1105 Green Slime on O-Rings

x1 42081
O-Ring, Small, Shock Cap
x1 42082
Shock Body, 10x32mm
x2 5407
O-Ring, Red
x1 42081
Shock O-Ring Spacer
x1 42080
Shock Bottom Cap

x1 42040
Enduro Rod Ends
NOTE: Build 4 complete shocks

GATE 02 SHOCK BUILD: BAG 9
Shock Bleeding Steps: 1. Pull shock shaft down. 2. Fill shock body 3/4 full with silicone fluid. 3. Slowly move the shock shaft up and down to remove air from
under piston. 4. Wait for bubbles to come to surface. 5. Fill shock body to top with silicone fluid. 6. Place a drop of oil in the cap and on cap threads. 7. Install cap and tighten completely. 8. Slowly compress shaft all the way to the top. If there is
pressure at the top of the stroke, there is too much oil or air. You must bleed it out. 9. Slowly pull shaft out. 10. Unscrew the cap 3/4 turn and tilt the shock at a slight angle. 11. Slowly compress the shaft to push out excess oil and air. You should see bubbles coming out from under the cap. 12. With the shaft compressed, tighten the cap and re-check for pressure at the top of the stroke. If there is still pressure, repeat steps 9 thru11.

SHOC#K54F2LU2ID

SH#O5C4K2F2LUID

Step 1-3

Step 3-4

Step 5-6

NOTE: Build 4 complete shocks
x1 42080
Shock Cap, Enduro

Step 7

Step 8-12

GATE 03 SHOCK BUILD: BAG 9
NOTE: Seat O-Ring into the groove on the inside of the shock collar
SHOC#K54F2LU2ID
x1 42081
O-Ring, Large, Shock Collar

x1 42079
Shock Collar,
Black, Aluminum

x1 42089
Shock Spring,
Gray, 1.49 lb/in, 63mm

3mm
x1 42080
Shock Spring Cup
NOTE: Build 4 complete shocks

14
GATE 04 SHOCK BUILD: BAG 9
42041 x1
Pivot Ball

x1 42041
Pivot Ball, Upper Shock
x1 42260
3x1mm Spacer
x1 89203
3x16mm BHCS
x1 25187
3x14mm BHCS

GATE 01 BUMPER BUILD: BAG 10
x1 42146
Trail Walker Bumper, Front

x2 42146
Trail Walker
Bumper, Mount

42041 x1
Pivot Ball

x1 42041
Pivot Ball, Upper Shock
x1 42260
3x1mm Spacer
x1 89203
3x16mm BHCS
x1 25187
3x14mm BHCS

41086 x2
2.5x16mm
SHCS

x1 42146
Trail Walker
Fairlead

x2 31532

3x8mm,

x2 42146

BHCS

D-Ring,

Molded

GATE 01 WHEEL/TIRE BUILD

x1 42109

The Ocho Inner Wheel, Black

x1 42106

Tire, General

Grabber X3
x1 42106

Tire, Insert

x1 42109
The Ocho
Hex Adapter, Black

x1 42109
The Ocho
Ring, Black

x1 42109
The Ocho
Outer Wheel, Black

x2 89203
3x16mm
BHCS

NOTE: Install #41088 screws in

a crossing pattern
1

6

3

4

5

2

x6 41088
2.6x10mm
BHCS

NOTE: Build 4 wheels/tires

33.657120, -117.701139

15

GATE 02 WHEEL/TIRE BUILD

GATE 01

BODY BUILD: BAG 11
NOTE: Install 4 body mounts
x2 42009
Body Mount, Short Pin

Front Post Rear Post

x2 25391
FT M4 Locknut,
Blue

x2 42109
The Ocho
Nut Cap, Black

NOTE: Install 4 wheels/tires

x2 89202
3x12mm
BHCS

x1 42131
Utility Bed,
Cage, Bottom

x2 42022
Screw Pin
GATE 02 BODY BUILD: BAG 11

89202 x4
3x12mm
BHCS

x1 42131
Utility Bed,
Cage, Hoop

4673 x4
2.5x4mm
BHCS

x2 42131
Utility Bed, Cage, L/R
x1 42131
Utility Bed, Floor

16

GATE 03 BODY BUILD: BAG 11
x2 42120
Sendero Windshield Wiper Blade

x1 42120

Sendero

Body, Cab

42123 x2

Sendero

x2 7187

LED Mount

2x8mm

SHCS

42123 x2

Sendero

x2

42123 Side Mirror,

Headlight Lense

Black

31509 x2
2x3mm BHCS
NOTE: Install body clip and o-ring inside the body

21173 x2
Body Clip,
Small

x2 42123

Side Mirror
Mount, Black 42123 x1
Sendero

x2 5407

Grill, Black

O-Ring

41079 x2
2.5x6mm
SHCS

x7 31531
3x6mm
BHCS

x1 42123

Sendero Grill

Backing Plate

x2 42123

Sendero Headlight

Bucket

NOTE: Install light buckets

x2 42123
Sendero Turn

and hardware inside the body

Signal Lense

GATE 04 BODY BUILD: BAG 11

6332 x4
Body Clips

42131 x1
Utility Bed,
Mounting Plate
25202 x2
3x10mm
FHCS
89209 x2
3x18mm
FHCS

x4 42120
Sendero Body, Bed Mount
x4 25203
3x12mm, FHCS

Shocks

5407 6299 42040 42041 42054 42055 42079 42080 42081 42082 42083 42085 42086 42087 42088 42089 42090 42091

O-Rings, Red, Silicone E-Clipp, 1/8″ Enduro Rod Ends Enduro Pivot Balls Set FT Enduro Pivot Ball, Steel FT Enduro, Shock Bushing, Steel Enduro Shock Parts, Black Aluminum Enduro Shock Parts Enduro Shock Internals Enduro Shock Body, Silver, 10x32mm Enduro Shock Shaft, 3x30mm Enduro Shock Parts, Blue Aluminum FT Enduro Shock Body, Bronze, 10x32mm Shock Spring, Green 0.71 lb/in, 63mm Long Shock Spring,White, 0.95 lb/in, 63mm Long Shock Spring, Gray, 1.49 lb/in, 63mm Long – KIT Shock Spring, Blue, 2.09 lb/in, 63mm Long Shock Spring,Yellow, 2.47 lb/in, 63mm Long

8

12

2

1

10

4

2 ea.

4 ea.

1

2

2

2 ea.

2

2

2

2

2

2

42041

NOTE: Install bed mounts and 3x12mm FHCS inside the body
6299 42081 6299
42083
42040 42041

42080 42081
42082
5407 42081 5407 42080

42081 42079
42089
42080

33.657120, -117.701139

Tie Rods/Links

42040 Enduro Rod Ends

1

42041 Enduro Pivot Balls Set

1

42043 Enduro Front Links Set

1

(Steering, 73mm, 83mm, 90mm, 100mm)

42044 Enduro Rear Links Set

1

(96mm, 100mm, 108mm, 114mm)

42054 FT Enduro Pivot Balls, Steel

10

42055 FT Enduro Shock Bushings, Steel

4

42041

Motor Mount

1336 18T 48P Aluminum Pinion

1

7337 Washers, .250 x .125 x .015

4

9654 Spur Gear, 87T, 48P

1

25201 M3x8mm FHCS

10

25225 M3x3mm Set Screw

10

25391 FT M4 Locknuts, Blue

10

31530 M3x5mm BHCS

10

31532 M3x8mm BHCS

10

42023 Stealth X Gearbox

1

(Case, Gear cover, Spur Gear Hubs)

42029 Stealth X (Motor Plate)

1

17

42040 42040 42040
42040 42040
42040 42041 42040

42044 42044 42043 42043 42043
42043 42043

25391 9654
42023
42023 25201

31530 42023 31530

42029

7337 31532 1336

25225

Transmission

31350 M2.5c10mm FHCS

10

41077 M2.5x14mm FHCS

10

41078 M3x28mm BHCS

10

42023 Stealth X Gearbox

1

(Case, Spur Gear Hubs, Gear Cover)

42025 Stealth X Idler Shaft, Idler Shim, Pins

1

42026 Stealth X Idler Gear (26T, 27T, 28T)

1ea

42027 Stealth X Outdrives

1

42028 Stealth X Drive Gear Set

1

42030 Stealth X Top Shaft (Stock Gearbox)

1

91560 FT Bearings, 5x10x4mm

4

91563 FT Bearings, 10x15x4mm

4

42030 42026

42026
42028 42025

42027

42027 42027

91560 91560 91563

41077 41078

42023

91563

31350 42023

18

Battery Tray/Radio Box

2308 6338 7337 25202 25203 25215 31532 42003 42006 42007 42215 42260 71050

M3x18mm BHCS Antenna Tube and Cap Washers, .250 x .125 x .015 M3x10mm FHCS M3x12mm FHCS M3 Locknut M3x8mm BHCS Enduro Battery Box (Small x1, Standard x1) Enduro Receiver Box (Bottom,Top) Enduro Receiver Box (Grommet, Plug, Gasket) Enduro IFS Servo Horn 3x7mm Spacer Set, Plastic Hook and Loop Straps

10 1 ea
4 10 10 10 10 1 1 1 1 1 2
31532
25215

25203 25203
7337
42215

42260

31532

2308

42007

42003

42006

25225 6338

25202

25202

42006

71050

25202 25202

42007

Bumpers/Body Mounts

7337 Washers, .250 x .125 x .015

4

31532 M3x8mm BHCS

10

41079 M2.5x6mm SHCS

10

41086 M2.5x16mm SHCS

10

42005 Shock Mount Set

1 ea

42009 Enduro Body Posts (4 Short, 1 Tall)

4

42022 Screw Pin, 4x12mm

6

42041 Enduro Pivot Ball Set

1

42126 Sendero Bumpers and Fairlead, Black

1 ea

42146 Trail Walker Bumper and Fairlead, Black

1

89203 M3x16mm BHCS

10

89208 M3x14mm FHCS

10

42146

31532

42146

42146

41086 41086

42146 31532

42041

42041

42146 42146
42005

42009

42005 42009

42041 7337
89203
42022 89208
89208

42041 7337 42022 89203
89208 89208

Drive Shafts

31532 42020 42021 42022

M3x8mm BHCS Enduro Drive Shaft Parts, Molded Enduro Drive Shaft Parts, Machined Screw Pin, 4x12mm

10

1

42021

1

6

42022

42021

42020

31532

42020

42020

42021

42021

31532

42020

42021
42021 42021

42021

42020 42022

33.657120, -117.701139

19

Front Axle

25187 25211 25215 41078 41086 42019 42060 42061 42062 42064 42065 42066 42067 42069 42070 71032 91474 91560 91563

M3x14mm BHCS M3x10mm BHCS M3 Locknut M3x28mm BHCS M2.5x16mm SHCS Enduro 2x11mm Pin Enduro Diff Cover and Lower 4-Link Mounts Enduro Axle Housing (Front, Rear) Enduro Caster Blocks and Steering Blocks Enduro Steering Block Arms Enduro Ring Gear, 30T Enduro Pinion Gear, 8T Enduro Front Universal, Driveshaft, 80mm Enduro Wheel Hex, 6mm Enduro Shoulder Screw (M3x10mm) M2.5x14mm SHCS FT Bearings, 7x14x3.5mm FT Bearings, 5x10x4mm FT Bearings, 10x15x4mm

25211
10

10

10

25187

10

25187

10

42064

10

91560

41086

1

25215

1 ea.

1 ea.

41078

1 ea.

1

1

25187

2

25215

42060 25187

4 6

91474 42066

42061 91560

10

4

42062

25211

4

4

91474

71032 25187

42060 42065

91560

42067

42070

91563

25187
42064 25215 42062
91560

42070 42019 42069

Rear Axle

25187 M3x14mm BHCS

10

25215 M3 Locknut

10

41078 M3x28mm BHCS

10

41086 M2.5x16mm SHCS

10

41089 M3x6mm LP SHCS

10

42019 Enduro 2x11mm Pin

10

42060 Enduro Diff Cover and Lower 4-Link Mounts

1

42061 Enduro Axle Housing (Front, Rear)

1 ea

42065 Enduro Ring Gear, 30T

1

42066 Enduro Pinion Gear, 8T

1

42068 Enduro Rear Drive Shaft, 80mm

2

42069 Enduro Wheel Hex, 6mm

4

71032 M2.5x14mm SHCS

10

91474 FT Bearings, 7x14x3.5mm

4

91560 FT Bearings, 5x10x4mm

4

41086

25215

42066

42065

91560

91474

42060

42060 91560

42061 25187

91474 71032

41078

91560 42068

41089 42019

42069

20

Wheel/Tire

25391 FT M4 Locknuts, Blue

10

41088 M2.6x10mm BHCS

10

42100 Enduro Method 701 Trail Series Wheel,

4

1.9″ Bronze

42101 Enduro Method 701 Trail Series Wheel,

4

1.9″ Black

42102 FT Enduro Beadlock Rings, Brass

4

42103 FT Enduro Beadlock Hex Adapter,Aluminum

4

42104 FT Enduro Beadlock Hex Adapter, Brass

4

42105 FT Tire Insert, 1.9″

2

42106 General Grabber X3 Tire w/Insert

2

(1.9×4.65″ DIA)

42107 General Grabber ATX Tire w/Insert – KIT

2

(1.55″ x 3.85″ DIA)

42108 Enduro The Ocho Wheel, 1.9″ Silver

4

42109 Enduro The Ocho Wheel, 1.9″ Black

4

42110 Enduro Trigon Wheel, 1.55″ Silver

4

42111 Enduro Trigon Wheel, 1.55″ Black

4

42109 42109

42106

42106

42109 42109
41088 25391 42109

Chassis

4689 25188 25201 25211 25215 31531 31532 42000 42001 42002 42004 42006 42245 89202 89203 89208

M3x16mm Set Screw M3x20mm BHCS M3x8mm FHCS M3x10mm BHCS M3 Locknuts M3x6mm BHCS M3x8mm BHCS Enduro Chassis Rail Set Enduro Bumper Mount Set (Front, Rear) Enduro Frame Mounting Plates Enduro Gearbox and Servo Mounts Enduro Floor Boards and Receiver Box Enduro Rock Sliders M3x12mm BHCS M3x16mm BHCS M3x14mm FHCS

10 10 10 10 10 10 10 1 1 ea. 1 ea. 1 ea. 1 ea.
2 42002
10 10 10

42004 42001

89203

42002 4689
42004 25215

42001

89203

25215 25201
42000 25211

25211

89208

42006 25188
31532

42245

31531

31532

25211

31532

25188

89202

89202

33.657120, -117.701139

SHOCK FLUIDS

5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438

10 Weight Silicone Shock Fluid 20 Weight Silicone Shock Fluid 30 Weight Silicone Shock Fluid 40 Weight Silicone Shock Fluid 22.5 Weight Silicone Shock Fluid 80 Weight Silicone Shock Fluid 27.5 Weight Silicone Shock Fluid 15 Weight Silicone Shock Fluid 25 Weight Silicone Shock Fluid 35 Weight Silicone Shock Fluid 45 Weight Silicone Shock Fluid 55 Weight Silicone Shock Fluid 32.5 Weight Silicone Shock Fluid 37.5 Weight Silicone Shock Fluid 42.5 Weight Silicone Shock Fluid 50 Weight Silicone Shock Fluid 60 Weight Silicone Shock Fluid 70 Weight Silicone Shock Fluid 47.5 Weight Silicone Shock Fluid

BODIES & DECALS

5407 6332 7187 21173 25203 31509 31511 31531 41079 42120 42121 42122 42123 42124 42125 42126 42127 42128 42129 42130 42131 42132 42133 42140 42141 42142 42143 42144 42145 42146 42147 42148 42235 42236 42237 42238 42240 42241 42242 42243 42244

O-Rings, Red, Silicone Body Clips M2x8mm SHCS Body Clips, Small M3x12mm FHCS M2x3mm BHCS M2x5mm SHCS M3x6mm BHCS M2.5x6mm SHCS Sendero Body Set, Clear (with Black Body Accessories) Sendero Body, Clear (Cab, Bed,Window Masks) Sendero Body Decal Sheet Sendero Body Accessories, Black Sendero Body Accessories, Chrome Sendero Body Accessories, Satin Chrome Sendero Bumpers (Front, Rear, and Fairlead), Black FT Sendero Fairlead, Aluminum FT Sendero Fairlead, Gunmetal Aluminum FT Sendero Fairlead, Green Aluminum FT Sendero Fairlead, Blue Aluminum Sendero Utility Bed Sendero Inner Fenders Element Decal Sheet Trail Walker Body Set, Clear Trail Walker Body, Clear Trail Walker Decal Set Trail Walker Body Accessories, Black Trail Walker Body Accessories, Silver Trail Walker Body Accessories, Grommets Trail Walker Bumper Trail Walker Body, Rear Shell Enduro Scale Decal Sheet Sendero HD Body, RTR Sendero HD Body Set, Clear Sendero HD Decal Sheet Trailrunner Body Set, Fire Trailrunner Body Set,White Trailrunner Body Set, Clear Trailrunner Decal Sheet Trailrunner Body Accessories Trailrunner Bumper Set

21

OPTION PARTS

2oz.

42010 Enduro Bumper Mounts, Hard

1

2oz.

42011 Enduro Frame Mounting Plates, Hard

1

2oz.

42012 Enduro Gearbox and Servo Mounts, Hard

1

2oz.

42013 Enduro Shock Mount Set, Hard

1

2oz.

42014 Enduro Floor Board, Receiver Box, Hard

1

2oz.

42015 Enduro Rock Slider, Hard

1

2oz.

42018 Enduro 12.8″ Wheelbase Conversion

1

2oz.

42024 Stealth X Gearbox Top Shaft, Inverse Gearbox

1

2oz.

42031 FT Stealth X Gearbox Idler Gear Set, Machined

1

2oz.

42032 FT Stealth X Gearbox Drive Gear Set, Machined

1

2oz.

42033 FT Stealth X Spur Gear Hub,Aluminum

2

2oz.

42034 Stealth X Gearbox, Complete

1

2oz.

42045 FT Enduro High Clearance Link Set

1

2oz.

42054 FT Pivot Ball, Steel (6mm)

10

2oz.

42055 FT Pivot Ball, Shock Bushing, Steel

4

2oz.

42056 FT Enduro Pivot Ball Set, Steel

1

2oz.

42058 FT Enduro Ring Gear Spool

1

2oz.

42059 FT Enduro Ring Gear, Machined 30T

1

2oz.

42071 Enduro Diff Cover and Lower 4-Link Mounts, Hard

1

42072 Enduro Axle Housing (Front, Rear), Hard

1 ea

42073 Enduro Caster and Steering Blocks, Hard

1

42076 FT Enduro Wheel Hex, 6mm (w/Set Screw) Steel

4

42077 Enduro Axle Kit, Complete (Builds either 1 front or 1 rear axle)

1

42078 FT Enduro Shock Set, 10x90mm

1

8

42079 Enduro Shock Parts, Black Aluminum

2 ea.

10

42085 Enduro Shock Parts, Blue Aluminum

2 ea.

10

42086 FT Enduro Shock Bodies, Bronze, 10x32mm

2

10

42103 FT Enduro Beadlock Hex Adapters,Aluminum

4

10

42104 FT Enduro Beadlock Hex Adapters, Brass

4

10

42105 FT Tire Inserts, 1.9″, 4.56 Inner Diameter

2

10

42206 Enduro IFS Steering Bellcranks, Hard

1

10

42207 Enduro IFS Suspension Arms, Hard

1

10

42208 Enduro IFS Gearbox and Servo Mounts Set, Hard

1

1

42209 Enduro IFS Skid Plates, Hard

1

1

42245 Trailrunner Rock Sliders

1

1

42246 Trailrunner Rock Sliders, Hard

1

1

42247 Trailrunner Exhaust, Magnaflow

1

1

1

1

1

1

1

1

1

1

1

1

1

1 1

PINIONS / SPUR GEARS

1

1

1335 17T 48P Aluminum Pinion Gear

1

1

1336 18T 48P Aluminum Pinion Gear (Kit)

1

1

1337 19T 48P Aluminum Pinion Gear

1

1

1338 20T 48P Aluminum Pinion Gear

1

1

1339 21T 48P Aluminum Pinion Gear

1

1

1340 22T 48P Aluminum Pinion Gear

1

1

1341 23T 48P Aluminum Pinion Gear

1

1

1342 24T 48P Aluminum Pinion Gear

1

1

1343 25T 48P Aluminum Pinion Gear

1

1

1344 26T 48P Aluminum Pinion Gear

1

1

1345 27T 48P Aluminum Pinion Gear

1

1

9652 78T 48P Spur Gear

1

1

9653 84T 48P Spur Gear

1

9654 87T 48P Spur Gear (Kit)

1

22

XP / AE ELECTRONICS

29257 29262 29263 29264 29265 29266 29267 29268 29272 29273 29274 29275 29277 29279 29290

AE XP130 2.4GHz 3CH Radio System ESS-One+ 2017 Engine Sound System ESS-Dual+ Engine Sound System ESS-Air Engine Sound System XP Police Light Bar, 1:10 Scale XP LED RC Light Kit (12 LED’s) XP LED Roof Light Kit (4 LED’s) XP LED Roof Light Kit (6 LED’s) XP 5 LED Aluminum Light Bar, 88mm XP 7 LED ALuminum Light Bar, 120mm XP 10 LED Aluminum Light Bar, 170mm XP LED Light Bar Hardware XP Head and Tail Light Kit XP LED Rock Light Set, 150mm XP DSV System

REEDY ELECTRONICS

27424 27425 27426 27427 27430 27431 27432

MOTORS Reedy Radon2 Crawler 16T 5-Slot 1850kV Brushed Motor Reedy Radon 2 15T 3-Slot 4100Kv Brushed Motor Reedy Radon 2 17T 3-Slot 3600Kv Brushed Motor Reedy Radon 2 19T 3-Slot 3200Kv Brushed Motor Reedy Crawler 16T 5-Slot RTR Brushed Motor Reedy Radon2 Crawler 12T 5-Slot 2700kV Brushed Motor Reedy Radon2 Crawler 20T 5-Slot 1500kV Brushed Motor

27011 27034 29199

ESC’s (SPEED CONTROLLERS) Reedy SC480X Brushed Crawler ESC Reedy SC480X Program Card Reedy SC400X Brushed Crawler ESC

27100 27101 27102 27103 27105 27110 27111 27116 27122 27123 27129 27130 27135 27136 27139 27140 27141

SERVOS & SERVO ACCESSORIES RS1206 Digital HV Hi-Speed Competition Servo RT1508 Digital HV Hi-Torque Competition Servo RS1206 Servo Case Set w/screws RS1206 Servo Gear Set RT1508 Servo Gear Set 0712MG Digital RTR Servo 1514MG Digital RTR Servo RC2312 Digital HV Competition Crawler Servo Reedy Aluminum Servo Horn (25) Reedy Aluminum Clamping Servo Horn (25) 0712MG Servo Gear Set 1514MG Servo Gear Set RT2406 Gear Set RT2706A Gear Set RT2406 Case Set RC2312 Gear Set RC2312 Case Set

REEDY BATTERIES / CHARGERS

1

BATTERIES

1

302

AA Alkaline 1.5V (4)

1

1

751

Wolfpack LiPo 3300mAh 30C 7.4V w/T-Plug (#730)

1

1

752

Wolfpack LiPo 4000mAh 35C 7.4V w/T-Plug (#731)

1

1

755

Wolfpack LiPo 4500mAh 35C 11.1V w/T-Plug (#735)

1

1

758

Wolfpack LiPo 3000mAh 30C 7.4V Shorty w/T-Plug

1

1

759

Wolfpack LiPo 3000mAh 30C 11.1V Shorty w/T-Plug

1

1

27313 LiPo Pro TX/RX 2400mAh 7.4V Flat

1

1

27315 LiFe Pro TX/RX 1600mAh 6.6V Flat

1

1

1

CHARGERS

1

27201 Reedy 324-S Compact Balance Charger

1

1

27202 123-S AC LiPo Compact Balance Charger

1

1

27203 Reedy 1416-C2L Dual AC/DC Competition Balance Charger

1

1

CHARGER ACCESSORIES

27220 7-in-1 Universal Charge Lead (4mm)

1

27221 T-plug Charge Lead (4mm)

1

27222 XH 2-6S Balance Board (4mm)

1

27223 RX Charger Lead FUT (4mm)

1

27224 US to IEC 320 C5 angle 1M AC Power Cord

1

27226 EU to IEC 320 C5 angle 1M AC Power Cord

1

27233 Reedy 1-2S 4mm/5mm Pro Charge Lead

1

27234 Reedy 4S 5mm Pro Charge Lead

1

27235 Reedy 2S RX/TX Pro Charge Lead

1

27236 Reedy 2S-4S T-plug Pro Charge Lead

1

27237 Reedy 2S-4S XT60 Pro Charge Lead

1

1

1

REEDY ACCESSORIES

1

647

Silicone Wire 12AWG-Black (1m)

1

1

648

Silicone Wire 14AWG-Black (1m)

1

1

650

Shrink Tubing – 15pcs 4.5mm x 20mm

1

1

790

Silicone Wire 13AWG-Black (1m)

1

1

791

Silicone Wire 13AWG-Black (30m)

1

27304 LiPo Battery Weight Set – Shorty

1

27433 Reedy Radon 2 Brush and Spring Set

1

1

27434 Reedy Radon 2 Wire Set

1

1

1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

33.657120, -117.701139

APPAREL / PROMOTIONAL

SP124 SP126 SP140 SP200 SP201*

TEE SHIRTS AE 2017 Worlds Tee, Black (S, M, L, XL-5XL) Team Associated Tri T-Shirt, Black (S, M, L, XL-5XL) Reedy Heritage Tee, Black (S, M, L, XL-5XL) Element RC Logo Tee, Gray (S, M, L, XL-5XL) Element RC Rhombus Tee, Black (S, M, L, XL-5XL)

SP142* SP230 SP231 SP250

HOODIES/JACKETS Reedy W19 Hoodie – Black (S, M, L, XL-3XL) Element RC Zip Up, Black (S, M, L, XL-5XL) Element RC Hoodie, Black (S, M, L, XL-5XL) Element RC Jacket, Black (S, M, L, XL-2XL)

SP20 SP430 SP260 SP261 SP262

HATS AE Patch Trucker Hat Reedy Trucker Hat 2018 Element RC Hat, Curved Bill, Black Element RC Hat, Flat Bill, Black Element RC Beanie, Black

SP115 SP280 SP281 SP282 SP425

BANNERS/MATS CARRIERS Reedy Circuit Cloth Banner Element RC Counter Top Mat Element RC Pit Mat Element RC Pit Towel FT Fluid Carrier

23

TOOLS

1111 FT Turnbuckle Wrench

1

1

1112 FT 4mm Turnbuckle Wrench

1

1

1114 FT Dual Turnbuckle Wrench

1

1

1452 FT TC Ride Height Gauge

1

1

1498 FT Universal Tire Balancer

1

1

1499 FT Body Reamer

1

1500 FT 1.5mm Hex Driver

1

1501 FT 2.0mm Hex Driver

1

1

1502 FT 2.0mm Ball Hex Driver

1

1

1503 FT 2.5mm Hex Driver

1

1

1504 FT 2.5mm Ball Hex Driver

1

1

1505 FT 3.0mm Hex Driver

1

1506 FT 5.0mm Hex Driver

1

1507 FT 5.5mm Nut Driver

1

1

1508 FT 7.0mm Nut Driver

1

1

1510 FT 1.5mm Hex Replacement Tip

1

1

1511 FT 2.0mm Hex Replacement Tip

1

1

1512 FT 2.0mm Ball Replacement Tip

1

1

1513 FT 2.5mm Hex Replacement Tip

1

1514 FT 2.5mm Ball Replacement Tip

1

1515 FT 3.0mm Hex Replacement Tip

1

1

1518 FT HEX Driver Tool Set (3pcs)

1

1

1519 FT Hex/Nut Driver Tool Set (5pc)

1

1

1522 FT Digital Scale, 100/0.01g

1

1

1555 FT Clutch Gauge, 4 Shoe

1

1

1568 FT 5.5mm Short Nut Driver

1

1569 FT 7mm Nut Driver,T-Handle

1

1570 FT 5.5mm Short Nut Driver

1

1571 FT 1:8 Wheel Nut Wrench, 17mm Hex

1

1579 FT Ball Cup Wrench – (will not work on Enduro rod ends)

1

1595 Chassis Weights, 1/4 oz

1

1650 7 Piece Hex Driver Set

1

1657 FT 1/4″ Hex Drive .050″ Tip

1

1659 FT 1/4″ Hex Drive 5/64″ – 2.0mm Tip

1

1661 FT 1/4″ Hex Drive 1.5mm Tip

1

1662 FT 1/4″ Hex Drive 2.5mm Tip

1

1666 FT 1/4″ Hex Drive 5.5mm Nut Driver Tip

1

1667 FT 1/4″ Hex Drive 7.0mm Nut Driver Tip

1

1668 FT 1/4″ Hex Drive 8.0mm Nut Driver Tip

1

1674 FT 1/4″ 5 Piece Power Tool Tips Set (5/64-2.0mm, 1.5mm, 2.5mm,

1

5/64″- 2.0mm ball, 2.5mm ball)

1679 FT T-Handle Ratchet Driver

1

1737 FT Body Scissors

1

3987 FT Droop Gauge

1

89240 RC8 FT Turnbuckle Wrench

1

• Use part number plus the desired size when ordering!

LUBES & ADHESIVES

1105 FT Green Slime Shock Lube

1

1596 FT Locking Adhesive

1

1597 FT Tire Adhesive, medium

1

6588 Black Grease – 4cc

1

6591 S.Diff Lube – 4cc

1

6636 Silicone Grease – 4cc

1

6727 Servo Tape

2

24
GATE 01 STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING REAR (STOCK)
OVERDRIVE: Overdrive is a scenario where the front and rear wheels do not rotate at the same speed. The Stealth X gearbox is designed to allow the front wheels to spin faster than the rear wheels. Overdrive is advantageouse when climbing up rock faces because the front tires will want to pull the vehicle up the rock. On desents, the rear tires rotating slower than the front tires will help keep the chassis more stable and keep the rear tires planted on the ground.
Stealth X: The Stealth X gearbox allows the driver to change the front to rear drive ratios with 3 separate ratio adjustments to the rear drive shaft. The driver has the option to flip the gearbox direction (motor mount facing the front) the optional inverse top shaft (#42024) is required.
Please Note: The 20T top shaft, 28T idler gear, and 52T drive gear will always be meshed together in all 6 gearbox configurations.

GATE 02 STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING REAR (STOCK)

1:1 (No Over Drive)

Over Drive Option 1 (Stock)

Over Drive Option 2

20T 28T

52T

28T

52T

20T 28T

52T

27T

53T

20T 28T

52T

26T

54T

Front Of Vehicle

Rear Of Vehicle

GATE 03 STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING FRONT (OPTIONAL – REQUIRES #42024 – TOP SHAFT )

1:1 (No Over Drive)

Over Drive Option 1 (Stock)

Over Drive Option 2

52T

28T 20T

52T

28T

Front Of Vehicle

52T

28T 20T

53T

27T

52T

28T 20T

54T

26T

Rear Of Vehicle

33.657120, -117.701139

25

TRAIL TIPS AND CHECKLIST
PREPARING TO HIT THE TRAIL: When preparing to hit the trail, it’s a good idea to have a checklist to make sure you have everything and don’t end up having to head back early.We’ve compiled a checklist of the things we think you’ll need on the trail.We’ve also left some space for you to add your specific items to the list. Keep in mind these are suggestions and every person will require different items.Weather and altitude will also dictate how much food and water a person will require. Do a little research first before heading out for a full day on the trail.
Truck with Charged Battery 1-2 spare Charged Batteries for your rig Radio with Charged Batteries Spare radio batteries Check all nuts and screws and tighten them. Including Wheel nuts! Spare parts (Nuts, Screws, Body Clips, and anything that may wear or break) Backpack Water (2 liters per person minimum) Snacks (protein bars, trailmix, etc.) Sturdy shoes (Hiking boots preferably or something with grip and ankle support) Element Hat or Beanie Element Hoodie or Jacket Sunscreen Bug Spray Lip Balm Nut Drivers (Factory Team Nut Drivers

1507, 1508) Allen wrenches (Factory Team Hex Driver set #1655) Cell phone and

charger Headlight or flashlight with spare batteries Compact action camera Camera Tripod ___

TREAD LIGHTLY: Remember, when driving your rig out on the trails, it’s important to tread lightly.We all know that the best place to enjoy our hobby is out in nature, and that means we need to preserve it for future hobbyist so we all have a place to enjoy. Here are a few tips to remember when out on the trail.
· Pack In/Pack Out: Don’t leave anything behind.Whether it’s trash, parts, or food. If you brought it, take it with you.
· National and Public Parks: If visiting a national park, leave the RC cars at home. It is illegal to drive any radio control vehicle within national park boundaries. Public parks are slightly different, some may allow radio control cars and others may not. Check with your local officials before driving in a public park.
· Be Considerate: Where ever you drive your radio control car, always be considerate of others. Hikers, bicyclists, and animals should always be given the right of way. · Keep It Quiet: If you’re sharing an area with other people, try to keep the noise to a minimum. If you come across animals or anglers, please be considerate and give them space. · Give A Hoot, Don’t Pollute: When enjoying the outdoors take your trash with you. Not only is it bad for the environment, it’s unsightly. If you see trash, pick it up, even if it isn’t yours. If we all do our part we can work together to keep our planet beautiful for future generations. · Only You Can Prevent Wild Fires: Some of us like to mix camping with RC cars.This is great! Just remember to follow all safety precautions and put out any camp fires before calling it a night.Also, be sure to unplug and store all LiPo batteries in LiPo sacks and a fire resistant storage device.

ASSOCIATED ELECTRICS, INC. 21062 BAKE PARKWAY. LAKE FOREST, CA 92630 USA
CALL: 949-544-7500 – FAX: 949-544-7501 CHECK OUT THE FOLLOWING WEB SITES FOR ALL OF OUR KITS, CURRENT PRODUCTS, NEW RELEASES, SETUP HELP, TIPS, AND RACING INFO!
WWW.ASSOCIATEDELECTRICS.COM #112149

ElementRC

@Element_RC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>