element ERFD19CGCS 18.4 cu.ft. French Door Refrigerator User Manual

element ERFD19CGCS 18.4 cu.ft. French Door Refrigerator

Product Information

Specifications:

• Model: ERFD19CGCS, ERFD19CGCB, ERFD19CGCW
• Capacity: 18.4 cu. ft.
• Refrigerator Type: French Door

Product Overview:
The refrigerator includes components such as door trays, shelves, fruit and vegetable boxes, LED lighting, control and display panel, quick cold dial block, upper freezer drawer, and lower freezer drawer.

Product Usage Instruction

Product Installation

Installing an Optional Ice Maker:
The refrigerator comes set up for ice maker installation. It is compatible with the Element EAIMM19 ice maker. Please refer to the individual ice maker installation instruction manual for detailed steps.

Levelling Feet:

1. Ensure the unit is levelled to avoid vibration.
2. Adjust levelling screws if needed for uneven floors.
3. The front should be slightly higher than the rear for proper door closing.
4. Use pliers for adjusting levelling screws.
5. Turn levelling screws counterclockwise to lower and clockwise to raise the unit.

Moving the Appliance:

1. Remove all food from inside.
2. Secure the power plug in the designated hook.
3. Tape parts like shelves and door handles to prevent falling during transport.
4. Move with at least two people carefully, keeping it upright over long distances.
5. After installation, connect the power plug to a socket to switch on the appliance.

Product Usage Instructions

• Changing the Light:
  Refer to the user manual for specific instructions on how to change the light in the refrigerator.

• Connecting the Appliance:
  Before putting food into the appliance, ensure it has cooled completely to prevent food spoilage. Connect the power plug to a socket to switch on the appliance.

• Tips for Energy Saving:
  For energy-saving tips specific to this refrigerator model, refer to the user manual or contact customer support.

FAQ:

• Q: Can I install an ice maker in this refrigerator?
  A: Yes, the refrigerator is compatible with the Element EAIMM19 ice maker. Refer to the installation manual for detailed instructions.

• Q: How do I level the refrigerator?
  A: Use pliers to adjust the levelling screws to ensure the unit is levelled. Turn the screws counterclockwise to lower and clockwise to raise the unit.

18.4 cu.ft. French Door Refrigerator

• ERFD19CGCS
• ERFD19CGCB
• ERFD19CGCW

Product may vary. Refer to the actual product

Before using your new product, read these instructions to prevent any damage.

SAFETY WARNINGS

Warning: risk of fire/flammable materials

• This appliance is intended to be used in households and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
• WARNING: Keep ventilation openings, in the appliance enclosure or the built-in structure, clear of obstruction.
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• WARNING: Do not damage the refrigerant circuit.
• WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• WARNING: Please abandon the refrigerator according to local regulators for it uses flammable blowing gas and refrigerant.
• WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
• WARNING: Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
• Do not use extension cords or ungrounded (two-prong) adapters.
• WARNING: Risk of child entrapment. Before you throw away your old refrigerator or freezer:
  • Take off the doors.
  • Leave the shelves in place so that children may not easily climb inside.
• The refrigerator must be disconnected from the source of the electrical supply before attempting the installation of the accessory.
• Refrigerant and cyclopentane foaming materials used for the appliance are flammable. Therefore, when the appliance is scrapped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualifications other than be disposed of by combustion, to prevent damage to the environment or any other harm.
• The necessity is that, doors or lids fitted with locks and keys, keep the keys out of the reach of children and not in the vicinity of the refrigerating appliance, to prevent children from being locked inside.
• WARNING: To avoid a hazard due to the instability of the appliance, it must be fixed by the instructions.
• WARNING: Connect to potable water supply only. (Suitable for ice-making machine)

PRODUCT OVERVIEW

Names of components

1. Door tray
2. Shelf
3. Fruit and vegetable box
4. LED lighting
5. Control and display panel
6. Quick cold dial block
7. Fruit and vegetable box
8. Upper freezer drawer
9. Lower freezer drawer

ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor

PRODUCT INSTALLATION

Installation Instructions

Installing an Optional Ice Maker
The refrigerator comes to set up for ice maker installation, This refrigerator is compatible with the Element EAIMM19 ice maker. Please refer to the individual ice maker installation instruction manual.

• WARNING: Connect to potable water supply only.
• Minimum/Maximum inlet water pressure: 138/827 kPa (20/120 psig).

Dimensions and Clearances

• Too small of a distance from adjacent items may result in the degradation of freezing capability and increased electricity costs. Allow over 4″ of clearance from each adjacent wall when installing the appliance.

ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Space requirement diagram (when the door is open and when the door is closed)

Width| Overall Height| Depth| Depth With Handle| Depth doors open 135o| Width doors open 135o
---|---|---|---|---|---
A| B| C| C1| D| E
29.5| 66.6| 30.9| 27.7| 40.9| 50.3

Notice: All dimensions in inches

Leveling feet

1. To avoid vibration, the unit must be levelled.
2. If required, adjust the levelling screws to compensate for the uneven floor.
3. The front should be slightly higher than the rear to aid in door closing.
4. Levelling screws can be turned easily by tipping the cabinet slightly.
5. Turn the leveling screws counterclockwise to raise the unit, and clockwise to lower it.

Levelling doors
List of tools to be provided by the user

Parts included with the kit

1. Raise the lower door to the level of the higher door.
2. Insert the supplied fastener ring by using pliers in the gap between the hinge grommet and the lower hinge. The number of fasten-rings you will need to insert depends on the gap.

Moving the appliance

1. Remove all food from inside the appliance.
2. Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the appliance.
3. Tape parts such as shelves and the door handle to prevent them from falling off while moving the appliance.
4. Move the appliance with more than two people carefully. When transporting the appliance over a long distance, keep the appliance upright.
5. After installing the appliance, connect the power plug to a socket to switch on the appliance.

Changing the light
Any replacement or maintenance of the LED lights is intended to be made by the manufacturer, its service agent or a similarly qualified person.

Connecting the appliance
After installing the appliance, connect the power plug to a socket outlet.

ATTENTION
After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil.

Precautions before operation:

• Before making changes the refrigerator must be disconnected from power.
• precautions should be taken to prevent any personal injury.

Tips for energy saving

• Do not place the appliance near cookers, radiators or other heat sources. If the ambient temperature is high, the compressor will run more frequently and for longer, resulting in increased energy consumption.
• Ensure that there is sufficient ventilation at the base of the appliance, on the sides of the appliance and at the back of the appliance. Never cover ventilation openings.
• Please also observe the spacing dimensions in the chapter “Installation”.
• The arrangement of drawers, shelves and racks as shown in the illustration offers the most efficient use of energy and should therefore be retained as far as possible. All drawers and shelves should remain in the appliance to keep the temperature stable and save energy.
• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the middle drawers can be removed. The top and bottom drawers and shelves should be removed last if necessary.
• An evenly filled refrigerator/freezer compartment contributes to optimal energy use. Therefore, avoid empty or half-empty compartments.
• Allow warm food to cool before placing it in the refrigerator/freezer. Food that has already cooled down increases energy efficiency.
• Allow frozen food to defrost in the refrigerator. The coldness of the frozen food reduces the energy consumption in the refrigerator compartment and thus increases the energy efficiency.
• Open the door only as briefly as necessary to minimise cold loss. Opening the door briefly and closing it properly reduces energy consumption.
• The door seals of your appliance must be perfectly intact so that the doors close properly and the energy consumption is not increased unnecessarily.

OPERATION INSTRUCTIONS

Control panel

Key

• A. Alarm/power off/power on button
• B. Freezer button
• C. Fridge button

Display

• The initial power-up takes 3 seconds while the boot bell rings, While the boot bell rings, and then goes into normal operation display. (Refrigerator and freezer are mid-range at the time of first power-up)
• Display fault code in the event of a failure (Loop display); display the set gear of the refrigeration room in the event of trouble-free.
• Under normal circumstances, the current set gear is displayed, and when a “fault code visible” class failure occurs, the fault code is displayed.

ATTENTION
The actual control panel may differ from model to model.

Operating instructions

Refrigerator settings
Press the refrigeration key to adjust the refrigeration set gear, each press the refrigeration key once, and the gear changes one gear, the order is as follows:

Freezer settings
Press the refrigeration key to adjust the refrigeration set gear, each press the refrigeration key once, and the gear changes one gear, the order is as follows:

Note:
The temperature of each gear is within ±2 of the set temperature, and the actual situation is slightly different according to the load situation.

Alarm off
When a fault alarm occurs, quickly press the alarm off key, and the fault alarm sound is cancelled.

Open the door and alarm
When the freezer door or refrigerator door opens for 120 seconds without shutting down or not closing well, the buzzer alarms until the freezer door or refrigerator door closes. Or press the alarm off key to cancel the buzzer alarm.

Standby mode
Press the alarm off key for 3 seconds to enter standby mode, cooling stops, the light turns off, and the display is off. In standby mode, hold the alarm off for 3 seconds, and return to normal control.

Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though the refrigerator may still have refrigerating and freezing functions with the following faults, the user should contact a maintenance specialist for maintenance, to ensure normal use of the refrigerator.

Fault Code

|

Fault Description

---|---
LED1/LED2 flashing| Refrigerator temperature sensor fault
LED1/LED5 flashing| Freezer temperature sensor fault
LED1/LED3 flashing| Freezing frost sensor faults
LED2/LED4 flashing| Communication failure
LED1/LED4 flashing| Ambient temperature sensor faults
LED2/LED5 flashing| Humidity sensor error

Tips on storing food

Freezer compartment

• The freezer is designated for the storage of food frozen at very low temperatures, long-term storage of frozen food, and for the production of ice.
• Only use the shelves in the door of the freezer to store frozen food, not for storing hot food designated for freezing.
• Do not put fresh and frozen food next to each other. The frozen food may thaw.
• When freezing fresh food (such as meat), cut them into parts that can be used at the same time.
• Storing frozen food: instructions are usually stated on the packages, which must be followed. If there is no information on the packaging, food should not be stored for longer than three months from the date of purchase.
• When purchasing frozen food, make sure that it is frozen at a suitable temperature and that the packaging is not damaged.
• Frozen food should be kept in suitable packages to retain its quality and should be returned to the freezer compartment as soon as possible.
• If a package of frozen food shows moisture or abnormal bulging, it is probable that it was stored at the wrong temperature and the content is spoiled.
• The storage period for frozen food depends on the room temperature, the thermostat setting, the frequency of opening the door of the freezer, the type of food and the time of transporting the product from the shop to the household. Always follow the instructions printed on the packaging and never exceed the maximum storage time stated on the package.

Cooling compartment

• To reduce moisture and subsequent ice build-up, never put liquid into the refrigerator in unsealed containers. Frost tends to concentrate in the coolest parts of the evaporator. Storing uncovered liquids results in a more frequent need for defrosting.
• Never put warm food in the refrigerator. These should first cool down at room temperature and then be placed to ensure adequate air circulation in the refrigerator.
• Foods or food containers should not touch the back wall of the refrigerator because they could freeze on the wall. Do not keep regularly opening the door of the refrigerator.
• Meat (packed in a package or plastic foil) can be placed in the refrigerator, which can be used in 1–2 days.
• Fruit and vegetables without packaging can be placed in the part designated for fresh fruit and vegetables.

Recommended Temperature
The optimal temperature setting for food storage:

• Fridge: 39°F
• Freezer: -2°F

ATTENTION
The optimal temperature setting of each compartment depends on the ambient temperature. The above optimal temperature is based on the ambient temperature of 77°F.

CLEANING AND MAINTENANCE

Defrosting
The refrigerator is made based on the air-cooling principle and thus has an automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from the power supply or by wiping with a dry towel.

Cleaning of door tray

• According to the direction arrow in the figure below, use both hands to squeeze the tray, and push it upward, then you can take it out.
• After washing the tray has been taken out, you can adjust its installation height to your requirement.

Cleaning of glass shelf

Please dismantle the cantilever shelf according to the arrows shown above:

1. Since the shelf and the box gall have the innermost stop, first lift the shelf, and then pull out outward.

Cleaning of box gall bottom roller groove

• First, pull out the fruit and vegetable box. Because the fruit and vegetable box has a stop, it needs to be lifted upward before the fruit and vegetable box can be removed.
• If the roller seat is stuck in the box tank groove, press the arrow in the direction of the image, remove the roller seat, and close the box tank groove as needed.

Cleaning of freezer lower drawer

• Upper freezer drawer：
  Open the freezing chamber door to the maximum stroke, lift the tail of the upper drawer of the freezing chamber, and take out the upper freezer drawer.

• Lower freezer drawer：
  Open the freezing chamber door to the maximum stroke, lift the end of the lower freezer drawer and lift it.

ATTENTION

Note: Don’t remove the lower freezer drawer if not necessary.

Stop using

Power failure:

In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.

Long-time nonuse:
The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odour.

Moving:
Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers etc. with tape, and tighten the levelling feet; close the doors and seal them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.

ATTENTION

• The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be interrupted; otherwise, the service life may be impaired.
• Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended to reduce the frequency of opening doors.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not solved.

Problem

|

Possible reason

---|---
Failed operation| •  Check whether the appliance is connected to power or whether the plug is in good contact
•  Check whether the voltage is too low
•  Check whether there is a power failure or partial circuits have tripped
Odor| • Odorous foods should be tightly wrapped
•  Check whether there is any rotten food
•  Clean the inside of the refrigerator
Long-time operation of the compressor| •  Long operation of the refrigerator is normal in summer
•  When the ambient temperature is high it is not suggestible having too much food in the appliance at the same time
• Food should be cool before being put into the appliance
•  The doors are opened too frequently
Light fails to get lit| •  Check whether the refrigerator is connected to the power supply and whether the illuminating light is damaged
•  Have the light replaced by a specialist
The door can not be properly closed| • The door is stuck by food packages. Too much food is placed
•  The refrigerator is tilted.
Loud noises| •  Check whether the floor is level and whether the refrigerator is placed stably
•  Check whether accessories are placed at proper locations
The door seal fails to be tight| •  Remove foreign matters on the door seal
---|---
•  Heat the door seal and then cool it for restoration (or blow it with an electrical drier or use a hot towel for heating)
Water pan overflows| • There is too much food in the chamber or stored food contains too much water, resulting in heavy defrosting
•  The doors are not closed properly, resulting in frosting due to the entry of air and increased water due to defrosting
Hot housing| •  Heat dissipation of the built-in condenser via the housing, which is normal when housing becomes hot due to high ambient temperature, storage of too much food or shutdown of the compressor is shut down, provide sound ventilation to facilitate heat dissipation
Surface condensation| •  Condensation on the exterior surface and door seals of the refrigerator is normal when the ambient humidity is too high. Just wipe the condensate with a clean towel.
Abnormal noise| •  Buzz: The compressor may produce buzzes during operation, and the buzzes are loud particularly upon start or stop. This is normal.
•  Creak: Refrigerant flowing inside of the appliance may produce a creak, which is normal.

WARRANTY

Element Appliance Limited Warranty
(the “Products” or “Product” when referencing a singular product herein)

This Product (including any accessories included in the original packaging) as supplied and distributed in new condition, is warranted by Element Appliance Company, LLC (“Element”) to the original customer who purchases the Product from an authorized Element retailer (the “Original Customer” or “you”) against defects in material and workmanship under proper use, maintenance, and care according to the owner’s manual, warnings, and instruction accompanying the Product (“Warranty”) as follows:

PLEASE NOTE
Proof of purchase evidencing the date of purchase by the Original Purchaser from an authorized Element retailer (“Valid Proof of Purchase”) is required for all Warranty services. The express Warranty set forth herein is subject to all terms and conditions set forth below.

1. WARRANTY SERVICE:
   • ONE-YEAR WARRANTY: Except as provided in subpart 1. B below, for one (1) year from the date of purchase by the Original Customer (the “Warranty Period”), if the parts or components covered by this Warranty are determined by Element or Element’s authorized service provider to be defective in material or workmanship, Element will, at its sole and absolute discretion and option: (i) repair the defective part or component at no charge to the Original Customer, (ii) replace the defective Product with a new Product of similar or better quality, at no charge to the Original Customer, or (iii) refund the documented purchase price paid by the Original Customer (excluding tax) to the Original Customer upon return of the defective Product as directed by Element. After the Warranty Period expires, the Original Customer must pay for all parts, components, shipping and handling, labour, and replacement costs associated with the Product or any part or component. Thereof, regardless of any defects in the Product or any part or component thereof.
   • LIMITED EXTENDED WARRANTY THROUGH PRODUCT REGISTRATION: If and only if the Original Customer registers the Product at www.elementelectronics.com within ninety (90) days of the date of purchase by the Original Customer, then the Warranty Period discussed in subpart 1.A. above shall be extended an additional one (1) year to a new Warranty Period equaling two (2) years from the date of purchase by the Original Customer. If the Product is not registered as provided for in this subpart 1. B, then the standard one-year Warranty Period outlined in subpart 1. A shall apply.
   • TIMING AND PROCEDURE: Before Warranty service can commence, the Original Customer must contact either (i) the retailer from whom the Original Customer purchased the Product, or (ii) Element directly, in either case for problem determination and service procedures. Valid Proof of Purchase evidencing that the Product is within the Warranty Period MUST be presented by the Original Customer to obtain the requested Warranty service. Please have your model and serial number available, along with your date of purchase of the Product. To remain eligible for Warranty service, the Original Customer may not return the Product or any part or component thereof to the retailer or Element without Element’s prior written consent.
2. EXCLUSIONS AND LIMITATIONS TO WARRANTY SERVICE
   The Warranty covers manufacturing defects in materials and workmanship of the Product encountered in the normal, non-commercial use of the Product, and does not cover (a) damages or malfunctions resulting from improper or unreasonable use or maintenance, abuse, negligence, failure to follow instructions contained in any written materials that accompany the Product, deterioration because of excess moisture, corrosive atmosphere, lightning, power surges, connections to the improper voltage supply, unauthorized alteration, or other external causes such as extremes in temperature or humidity, modifications, scratches or discolouration; (b) improper or incorrectly performed repairs by service providers not authorized by Element; (c) transportation, shipping, delivery, pickup, insurance, installation, or setup costs; (d) ordinary wear and tear, cosmetic damage, or damage due to acts of nature, including but not limited to, water, floods, wind, storm, tornado, earthquake, or fire, or due to damage caused by extraordinary impact events, such as dropping, crushing, demolition or other extraordinary damage; (e) commercial use of the Product, or use of the Product for anything other than single-family household or residential use; or (f) modificafion of the Product or any part of the Product.

This Warranty is made to the Original Customer only and does not cover Products sold AS IS or WITH ALL FAULTS. The Warranty is invalid if the factory-applied serial number has been altered or removed from the Product. This Warranty is valid only in the United States and only applies to the Product if it was purchased and serviced in the United States. The addition of equipment or features to the Product that is not manufactured or recommended by Element could affect the intended function of the Product and therefore may void the Warranty. Furthermore, the exposure of the Product to chemicals, heat, cold, humidity, or other elements can affect the Product components, and therefore, the Warranty does not cover discolouration, fading, cosmetic changes, rust, or any damages or failure related to any such items. The Warranty is contingent upon the proper use, maintenance, and care of the Product. The Warranty may be void if the Product has been used in a manner contradictory to, or violation of, the terms of the user’s manual, warnings, or instructions accompanying the Product.

THIS WARRANTY IS MADE INSTEAD OF AND SUPERSEDES ALL OTHER WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR GENERAL USE, WHETHER EXPRESS, IMPLIED, COLLATERAL, STATUTORY, OR PROVIDED BY COMMON LAW, THE UNIFORM COMMERCIAL CODE, OR OTHERWISE. ELEMENT FURTHER DISCLAIMS ALL WARRANTIES AFTER THE END OF THE WARRANTY TERM DEFINED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY OTHER PERSON, FIRM, OR ENTITY CONCERNING THE PRODUCT SHALL BE BINDING ON ELEMENT. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE, AT ELEMENT’S SOLE DISCRETION, ARE THE EXCLUSIVE REMEDIES OF THE CUSTOMER.

ELEMENT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT. THESE INCLUDE BUT ARE NOT LIMITED TO, ANY DAMAGES IN THE FORM OF LOST PROFITS, LOSS OF USE, LEGAL FEES, ECONOMIC LOSS, PERSONAL INJURIES, OR ANY OTHER DAMAGES CAUSED BY CIRCUMSTANCES BEYOND THE CONTROL OF THE ELEMENT. NOTWITHSTANDING THE FOREGOING, ELEMENT’S AGGREGATE LIABILITY TO ANY CUSTOMER SHALL NOT EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CUSTOMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERRABLE. NO PERSON IS AUTHORIZED TO ALTER, EXTEND, OR WAIVE THIS WARRANTY OR ANY OF ITS TERMS OR CONDITIONS.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on warranties, so the above limitations or exclusions may not apply to you. This Warranty gives you specific rights, and you may have other rights, which vary from state to state. The exclusions and limitations to the Warranty apply to the maximum extent permitted by law and unless restricted or prohibited by law. Where any term of this Warranty is prohibited by applicable law, it shall be null and void, but the remainder of this Warranty shall remain in effect.

PLEASE DIRECT ALL CORRESPONDENCE TO:

Element Appliance Company, LLC

• customerservice@elementelectronics.com
• 888-842-3577
• https://elementelectronics.com.

CONTACT US:
Element, the Element Logo, and Bring it Home are trademarks of Element Brand Holding, LLC. All other trademarks are the property of their respective owner, who have not sponsored, endorsed, or approved this product. ©2023 Element Appliance Company, LLC. All rights reserved.

Distributed by Element Appliance Company, LLC
Augusta, GA 30909

For service, support and warranty information:
Call 888.842.3577, email us at customerservice@elementelectronics.com or visit www.elementelectronics.com.

References

• Element Electronics Home - TVs, Audio, Home Entertainment, Appliances
• Element Electronics Home - TVs, Audio, Home Entertainment, Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>