40120 Enduro Trail Truck Sendero HD

Product Information

Specifications

• Product Name: Sendero HD Pick-Up Truck Body
• Manufacturer: Associated Electrics, Inc.
• Address: 21062 Bake Parkway Lake Forest, CA 92630
• Customer Service Tel: 949.544.7500
• Website: www.ElementRC.com

Features

• Axle articulation
• Grabber X3 tires
• Electronic components included
• Sendero body features

Description

The Sendero HD Pick-Up Truck Body is a performance rig built for
endurance. It features innovative design elements such as the
steering link assembly located behind the axle for improved
approach angle and front end clearance, making it easier to handle
rough terrains. The truck comes equipped with Reedy Power
electronics, including a powerful 16-turn 5-slot brushed crawler
motor and an electronic speed controller for ample power. The
package also includes a 3-channel radio and a high-torque metal
gear servo for precise control on the trail.

Product Usage Instructions

Assembly

1. Refer to the assembly manual provided for detailed
   instructions.

2. Ensure all required items are available before starting the
   assembly process.

3. Follow the step-by-step guide to build the Enduro Trail
   Truck.

Maintenance

1. Regularly inspect the truck for any wear and tear.
2. Clean the truck after each use to prevent dirt buildup.
3. Refer to maintenance tips in the manual for optimal
   performance.

Troubleshooting

1. If you encounter any issues, refer to the troubleshooting
   section of the manual.

2. Contact customer service for assistance if problems
   persist.

FAQs

Q: What items are needed to build or maintain the Enduro Trail

Truck?

A: The required items include the components mentioned in the
assembly manual along with additional hardware like screws, shims,
and washers.

Q: Are there any optional items that can aid in building and

maintaining the truck?

A: While not mandatory, helpful items such as servo horn spacers
and drive gear shims can facilitate the assembly and maintenance
process.

SENDERO HD PICK-UP TRUCK BODY
OWNERS BUILD MANUAL

02

33.657120,-117.701139

Associated Electrics, Inc. 21062 Bake Parkway Lake Forest, CA 92630
Customer Service Tel: 949.544.7500 Fax: 949.544.7501

INTRODUCTION
Thank you for purchasing this Element RC product. This assembly manual contains instructions and tips for building and maintaining your new Enduro chassis. Please take a moment to read through this manual to help familiarize yourself with these steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.

Follow Us On Social Media

ElementRC

@Element_RC

www.ElementRC.com
AE is a Registered Trademark of Associated Electrics, Inc. TEAM ASSOCIATED is a Registered Trademark of Associated Electrics, Inc.
REEDY is a Registered Trademark of Associated Electrics, Inc. FACTORY TEAM is a Registered Trademark of Associated Electrics, Inc.
ELEMENT TM is a Trademark of Associated Electrics, Inc. AREA 51 is a Registered Trademark of Associated Electrics, Inc. STEALTH is a Registered Trademark of Associated Electrics, Inc. GREEN SLIME is a Registered Trademark of Associated Electrics, Inc.

ENDURO TRAIL TRUCK
A performance rig built to endure. When hitting the trail, you want to do it with confidence and the answer is the all new Enduro Trail Truck!
At the heart of the Enduro is our revolutionary Stealth® X gearbox. Although the exterior appears to have a conventional 3-gear transmission look, the inside is far from conventional.The Stealth® X features the ability to adjust the rear drive ratio independently of the front drive across three levels: stock overdrives the front end 5.7% (installed in RTR), option 1 provides a one-to-one drive ratio front-to-rear (available separately), and option 2 overdrives the front end 11.83% (included with RTR). Feeding the power to the tires are 3-piece telescopic driveshafts with an extruded aluminum center section, universal front drive axles, and hardened steel ring and pinion gears. With the Enduro drivetrain, delivering useful power will not be an issue.
We relocated the steering link assembly from the conventional location, to behind the axle (BTA).This feature greatly improves approach angle and front end clearance, making rough terrain much easier to handle.
The Enduro Trail Truck comes ready for adventure right out of the box, with performance-driven Reedy Power electronics.The all-new, ultra-smooth and powerful, 16-turn 5-slot brushed crawler motor and Reedy Power SC480X electronic speed controller with T-plug connector, supply ample power to this tough rig. Controlling the beast on the trail is our 3-channel XP130 2.4GHz radio and Reedy Power high-torque 1320MG metal gear servo.
With all this packed in one box, we know the Enduro Trail Truck is ready for the trail… Are you?

ITEMS NEEDED The following items are required to build or maintain your Enduro Trail Truck.
· 1.5mm Allen Wrench (#1500) · 2mm Allen Wrench (#1501) · 2.5mm Allen Wrench (#1503) · Pliers · Long Nose Pliers · 5.5mm Nut Driver (#1507) · 7mm Nut Driver (#1508)
OTHER HELPFUL ITEMS The following items aren’t required, but will aid in the building and maintaining of your Enduro Trail Truck.
· Threadlock (#1596) · Green Slime (#1105)

FEATURES
· Stealth X Gearbox with adjustable overdrive gears
· BTA steering [Behind the Axle] · CMS [Chassis Mounted Servo] · Integrated servo winch mount · Adjustable front track bar · Universal front drive axles · Stamped steel C-Channel frame
rails · Enclosed receiver box · 12mm wheel hexes · Adjustable front and rear bumper
mounts · Adjustable width rock sliders · Two battery boxes (Shorty and
regular size!) · Threaded aluminum shock bodies · Aluminum steering plates · Aluminum motor plate · Adjustable body posts · Optimized rod ends for more fluid
axle articulation

· Adjustable rear shock mount positions
· Telescopic driveshaft’s front and rear
· Extruded aluminum driveshaft splines
· One-piece rear axle design · Splined front axle with adjustable
caster · Machined input pinion gear · Metal ring gear · Machined steel top shaft · Metal idler gears · Heavy duty 5mm diameter steel
links · Precision metal ball bearings
included · Steel servo horn · Licensed 1.9″x4.65″ General
Grabber X3 tires

ELECTRONICS:
· Water resistant 2S-3S LiPo compatible Reedy SC480X brushed electronic speed control with adjustable drag brake and T-plug battery connector
· Smooth and powerful Reedy Crawler 16T 5-slot brushed motor
· XP130 2.4GHz radio system (3 Channel)
· Reedy high-torque 1320MG metal gear servo (13kg/180 oz.)
SENDERO BODY FEATURES:
· Sendero body thermoformed in high-strength polycarbonate
· Two-piece cab and bed design · Clear windows · Molded grill · Replaceable headlight lenses · Pivoting side mirrors · LED headlights · Adjustable front bumper

03 33.657120, -117.701139

HARDWARE 1:1 SCALE VIEW HARDWARE USED WITH OPTIONAL REPLACEMENT PART NUMBERS

FLAT HEAD SCREWS (FHCS) 2.5x10mm (31350)

SOCKET HEAD SCREWS (SHCS)
2x5mm (31511) Aluminum (8566)

SHIMS AND WASHERS .250x.125x.015 (7337)

2.5x14mm (41077)

2x8mm (7187)

Servo Horn Spacer (42041)

3x8mm (25201) 3x10mm (25202) 3x12mm (25203)

2.5x6mm (41079)

Drive Gear Shim (42027)

2.5×10 (41087) 2.5×14 (71032)

MISC. SCREWS Shoulder Screw 3x4x10mm (42070)

3x14mm (89208)
BUTTON HEAD SCREWS (BHCS) 2.6x10mm (41088)
Self Tapping Thread
3x5mm (31530)
3x6mm (31531)
3x8mm (31532) Aluminum (8552)
3x10mm (25211) Aluminum (8554)

2.5×16 (41086)

Screw Pin (42022)

SET SCREWS

3x3mm (25225) 3x16mm (4689)

Pin 2x11mm (42019)

PIVOT BALLS

LINKS

Pivot Ball, Short (42041)

Pivot Ball, Long, Upper Shock (42041)

LOCK NUTS

M3 Locknuts (25215) Aluminum (31550)

114mm 108mm 96mm100mm 93mm
83mm
73mm

3x12mm (89202)

M4 Locknut W/Flange (25391)

3x14mm (25187)

BEARINGS

3x16mm (89203)

5x10x4mm (91560)

3x18mm (2308)

7x14x3.5mm (91474)

3x20mm (25188) 3x28mm (41078)

10x15x4mm (91563)

04
TABLE OF CONTENTS
01 COVER 02 INTRODUCTION 03 1:1 HARDWARE “FOLD OUT” 04 TABLE OF CONTENTS 05 CHASSIS BUILD (BAG 1, 2) 06 ELECTRONIC MOUNTS BUILD (BAG 3) 07 GEARBOX BUILD (BAG 4) 08 FRONT AXLES BUILD (BAG 5) 09 REAR AXLES BUILD (BAG 6) 09 LINKS BUILD (BAG 7)

33.657120, -117.701139

12 DRIVESHAFTS BUILD (BAG 8) 13 SHOCKS BUILD (BAG 9) 14 BUMPERS BUILD (BAG 10) 14 WHEELS/TIRES BUILD 15 BODY BUILD (BAG 11) 16 CATALOG 24 OPTIONAL GEARBOX BUILD 25 TRAIL TIPS 26 BACK COVER

5/8/2023

USING THIS MANUAL

This symbol indicates a special note or instruction in the manual.

x2

This symbol indicates the number of

the same part that is required.

2

This symbol indicates the order within a step to assemble parts.

This symbol indicates a Trail Tip.

BLA#C6K58GR8EASE

This symbol indicates where Black Grease should be applied.

GR#E1E1N0S5LIME

This symbol indicates where Green Slime can be applied. *not included

TH#R1E5A9D6LOCK SH#O5C4K2F2LUID

This symbol indicates where Thread Lock Adhesive should be applied. *not included
This symbol indicates where Shock Fluid should be applied.

There is a 1:1 hardware foldout page in the front of the manual. To check the size of a part, line up your hardware with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.

YOUR BUILD BEGINS HERE.

05

GATE 01

CHASSIS BUILD: BAG 1, 2

31531 x1
3x6mm
BHCS

25211 x2
3x10mm
BHCS

x2 25211
3x10mm
BHCS

31532 x1
3x8mm
BHCS

42002 x1
Battery
Mount

x1 42000
Chassis Rail
Left

x1 42001
Bumper Mount
Rear

GATE 02 CHASSIS BUILD: BAG 1, 2

x1 42001

Bumper Mount 31532 x1

Front

3x8mm

BHCS

25211 x2
3x10mm

BHCS

31532 x1
3x8mm
BHCS

89208 x4
3x14mm FHCS
x1 42006
Floor Board

42005 x1
Shock Mount
(Left, Rear)

x1 42002
Chassis Brace
Rear

x1 42005
Shock Mount (Left, Front)
x1 42004
Servo Mount
x1 42004
Gearbox Mount

GATE 03 CHASSIS BUILD: BAG 1, 2

x2 25211
3x10mm
BHCS

x1 42000
Chassis Rail
Right

x2 25211

3x10mm

x1 31531

BHCS

3x6mm

BHCS

x1 31532
3x8mm
BHCS

x1 42005
Shock Mount
(Right, Front)

NOTE: Install Left and Right side Rock Sliders

42005 x1
Shock Mount
(Right, Rear)

x4 89208
3x14mm
FHCS

x1 42006
Floor Board
x1 31532
3x8mm
BHCS
x2 25211
3x10mm
BHCS
x1 31532
3x8mm
BHCS

89202 x2
3x12mm
BHCS

x1 42245
Trailrunner
Rock Slider

06

GATE 01
25203 x4
3x12mm FHCS

ELECTRONIC MOUNTS BUILD: BAG 3
NOTE: There is an optional “standard pack” sized battery tray included!

42003 x1
Battery Box,
Shorty Pack

71050 x2
Hook and
Loop Straps

GATE 02

ELECTRONIC MOUNTS BUILD: BAG 3

x1 Receiver

42007 x1
Receiver
Grommet

x1 6727
Servo Tape

42007 x1
Receiver Grommet
Plug

x1 42006
Receiver Box Bottom
x4 25202
3x10mm FHCS

Servo x1
42215 x1
Servo Horn 25T
THREAD LOCK #1596

x4 41090
3x10mm LP SHCS
x1 25211
3x10mm BHCS

GATE 03 ELECTRONIC MOUNTS BUILD: BAG 3
ESC x1
6727 x1
Servo Tape

6338 x1
Antenna Tube and Cap
25202 x4
3x10mm FHCS
42006 x1
Receiver Box Lid

x1 25225
3x3mm
Set Screw

x1 42007
Receiver Box
Grommet

33.657120, -117.701139

07

BL#A6C5K8G8REASE

GATE 01 GEARBOX BUILD: BAG 4

x1 42028
Stealth X Gearbox
Drive Gear, 53T

BLACK GREASE #6588
x4 41077
2.5x14mm FHCS

x4 31350
2.5x10mm
FHCS

91563 x2

x1 42027

10x15x4mm

Stealth X Gearbox Bearing

Outdrive, Long

x1 42027

Stealth X Gearbox

x1 42027

Outdrive, Short

Stealth X Gearbox

Drive Gear Shim

x1
NOTE: Make sure the 10x15x4mm bearing is completely seated in the short outdrive

42028 Stealth X Gearbox Drive Gear, 52T

GATE 02
42025 x2
Idler Shaft Pin 2x9mm

GEARBOX BUILD: BAG 4
x1 42026
Stealth X Gearbox Idler Gear, 28T

41078 x5
3x28mm
BHCS

NOTE: There are optional gearbox builds on page 24

42025 x1
Stealth X Gearbox Idler Shaft
42026 x1
Stealth X Gearbox Idler Gear, 27T

42030 x1
Stealth X Gearbox Top Shaft, Rear
91560 x4
5x10x4mm Bearing

x1 42023

Stealth X Gearbox 20T 28T

52T

Case
x2 91563

27T

53T

10x15x4mm

Bearing

x1 42023
Stealth X Gearbox
Case

Over Drive Option 1 (Stock)

GATE 03 GEARBOX BUILD: BAG 4

42029 x1
Stealth X Gearbox Motor Plate
x3 25201
3x8mm FHCS

42023 x2
Stealth X Gearbox Spur Gear Hub
25391 x1
FT M4 Locknut

41090 x2
3x10mm
LP SHCS

Motor x1

x1 9654
Spur Gear
48P, 87T

08
GATE 04 GEARBOX BUILD: BAG 4

42023 x1
Stealth X Gearbox
Gear Cover

1336 x1
Pinion Gear
18T

31530 x2
3x5mm
BHCS

x1 25225
3x3mm Set Screw
NOTE: Make sure the gear mesh between the spur gear and pinion has a slight amount of movement between the two gears.

GATE 01 FRONT AXLE BUILD: BAG 5

91560 x2
5x10x4mm
Bearing

41086 x4
2.5x16mm
SHCS

91474 x2
7x14x3.5mm
Bearing

BL#A6CK58G8REASE

42060 x1
Axle Housing
Differential Cover

x1 42066
Pinion Gear, 8T
x1 42065
Ring Gear, 30T

GATE 02 FRONT AXLE BUILD: BAG 5
NOTE: Tighten the caster block clamp until the screw is flush with the end!

x1 42061
Axle Housing,
Front

89208 x2
3x14mm FHCS
NOTE: Align the two arrows when installing the caster block!

71032 x2
2.5x14mm
SHCS

x2 25201
3x8mm FHCS
x1 91560
5x10x4mm Bearing
42062 x1
Caster Block, Left
NOTE: Install Left and right side caster blocks and bearings
x1 42060
Lower 4-Link Mount
x2 42070
3x4x10mm Shoulder Screw

25187 x1
3x14mm
BHCS

42067 x1
Universal

NOTE: Install left and right side steering blocks and universals

42062 x1
Steering
Block

x1 91563
10x15x4mm Bearing
x1 91560
5x10x4mm Bearing

NOTE: Install left and right side axle mounts and shoulder screws

33.657120, -117.701139

09

GATE 03 FRONT AXLE BUILD: BAG 5
x4 25211
3x10mm BHCS

x1 42064
Steering Block Arm,
BTA, Right

x1 42064
Steering Block Arm,
BTA, Left

x1 42019
Wheel Hex
Pin, 2x11mm

NOTE: Install left and right side wheel hexes

x1 42069
Wheel Hex,
6mm

GATE 01

REAR AXLE BUILD: BAG 6

91474 x2
7x14x3.5mm
Bearing

42065 x1
Ring Gear,
30T

x1 42060
Axle Housing,
Differential Cover

x4 41086
2.5x16mm,
SHCS

x2 91560
5x10x4mm
Bearing

BL#A6C5K8G8REASE
x1 42066
Pinion Gear, 8T
x1 42061
Axle Housing, Rear

GATE 02 REAR AXLE BUILD: BAG 6

NOTE: Install left and right side drive shafts

x1 42068
Drive Shaft,
Rear

x1 91560
5x10x4mm Bearing
x2 41089
3x6mm LP SHCS

GATE 01 LINKS BUILD: BAG 7

x2 42041
Pivot Ball, 6mm
BLA#C6K5G8R8EASE
x2 42040
Rod End, Curved

x1 42043
Link,
83mm

25187 x1
3x14mm BHCS
BLAC#K6G5R8E8ASE

71032 x2
2.5x14mm
SHCS

x1 42019
Pin,
2x11mm

x1 42060
Lower 4-Link Mount
NOTE: Install left and right side axle mounts and wheel hexes

x1 42069
Wheel Hex,
6mm

112.50mm

89203 x1
3x16mm
BHCS

10

GATE 02 LINKS BUILD: BAG 7

x2 42041

Pivot 6mm

Ball,

BLACK#6G5R8EA8SE

x1

x2 42040
Rod End,
Curved

42043 Link, 83mm

BLACK#6G5R8EA8SE

NOTE: Install servo link screw #2308 in outermost hole in servo horn.
25187 x1
3x14mm BHCS

NOTE: Check the rod end angles before installation
102.20mm
GATE 03 LINKS BUILD: BAG 7

25215 x1
M3 Locknut,
Black

2308 x1
3x18mm
BHCS

x2 42040

Rod End, Curved

BLACK#6G5R8EA8SE

BLACK GREASE #6588
x1 42043
Link, 93mm

25188 x1
3x20mm,
BHCS

x2 42041
Pivot Ball,
6mm

122.00mm

NOTE: Check the rod end angles before installation

25215 x2
M3 Locknut,
Black

GATE 04 LINKS BUILD: BAG 7

x2 42041

Pivot Ball,

6mm

BLACK GREASE #6588

x2 42040
Rod End,
Straight

x1 42043
Link,
BLACK#6G5R8EA8SE

25187 x2
3x14mm,
BHCS

154.50mm

25215 x2
M3 Locknut,
Black

x1 42260
3x7mm Spacer
41078 x1
3x28mm, BHCS
x1 42041
Pivot Ball, 6mm

33.657120, -117.701139

GATE 05 LINKS BUILD: BAG 7
x2 42041
Pivot Ball, 6mm
BLACK GREASE #6588

NOTE: Build and install two rear upper links

x2 42040
Rod End,
Curved

x1 42044
Link, 108mm
BLACK GREASE #6588

NOTE: Check the rod end angles before installation
137.00mm

GATE 06 LINKS BUILD: BAG 7

x2 42041
Pivot Ball,
6mm

NOTE: Build and install two front lower links

BLACK GREASE #6588

x2 42040
Rod End,
Curved

x1 42043
Link, 100mm
BLACK GREASE #6588

NOTE: Check the rod end angles before installation

129.50mm

25215 x2
M3 Locknut,
Black

GATE 07

LINKS BUILD: BAG 7
x2 42041
Pivot Ball, 6mm

BLACK GREASE #6588

NOTE: Build and install two rear lower links

4689 x1
3x16mm,
Set Screw

x2 42040
Rod End,
Curved

x1 42044
Link, 114mm
BLACK GREASE #6588

NOTE: Check the rod end angles before installation

143.00mm

25187 x1
3x14mm
BHCS

11
x1 25188
3x20mm, BHCS
41078 x1
3x28mm BHCS
x1 25187
3x14mm, BHCS
x1 4689
3x16mm, Set Screw

12

GATE 01 DRIVE SHAFT BUILD: BAG 8

x2 42021
Pin,
2x11mm

x1 42020
Drive Shaft, Female
(33mm, 42mm)

x2

31532 3x8mm BHCS

42021 x2
Drive Shaft,
Male, CVA

THRE#A1D5L9O6CK THRE#A1D5L9O6CK

x2 42021
Drive Shaft,
Female, CVA

x2 42021
Drive Shaft
Barrel

Female 1 Female 2
Male

Drive Shaft Lengths

Front (mm) 33 33 48

Rear (mm) 33 42 60

x1 42020
Pin Retainer,
Short

GATE 02 DRIVESHAFT BUILD: BAG 8

x1 42020
Drive Shaft, Male
(48mm, 60mm)

42020 Gearbox Side
42020 Axle Side
x1 42020
Pin Retainer, Long
NOTE: Build a front and rear drive shaft

NOTE: Install the front drive shaft
GATE 03 DRIVESHAFT BUILD: BAG 8
NOTE: Make sure the screw pins are aligned with each female CVA during assembly

TH#R1E5A9D 6LOCK

FRONT 33
48 33

THRE#A1D5L9O6CK

42022 x4
Screw Pin

NOTE: Install the rear drive shaft

NOTE: Make sure the phasing of the drive shafts is correct when installing them to the axles and gearbox.
Correct Phasing

Incorrect Phasing

42

REAR

60 33

THREAD LOCK #1596

TH#R1E5A9D6LOCK

33.657120, -117.701139

13

GATE 01 SHOCK BUILD: BAG 9

x1 42081
Shock
Piston

SHOCK CAP O-RING
SHOCK COLLAR O-RING

x2 6299
E-Clip
x1 42083
Shock Shaft, 3x30mm

SH#O5C4K 2F2LUID
SH#O5C4K 2F2LUID
Pro Tip: Use #1105 Green Slime on O-Rings

x1 42081
O-Ring, Small, Shock Cap
x1 42082
Shock Body, 10x32mm
x2 5407
O-Ring, Red
x1 42081
Shock O-Ring Spacer
x1 42080
Shock Bottom Cap

x1 42040
Enduro Rod Ends
NOTE: Build 4 complete shocks

GATE 02 SHOCK BUILD: BAG 9
Shock Bleeding Steps: 1. Pull shock shaft down. 2. Fill shock body 3/4 full with silicone fluid. 3. Slowly move the shock shaft up and down to remove air from
under piston. 4. Wait for bubbles to come to surface. 5. Fill shock body to top with silicone fluid. 6. Place a drop of oil in the cap and on cap threads. 7. Install cap and tighten completely. 8. Slowly compress shaft all the way to the top. If there is
pressure at the top of the stroke, there is too much oil or air. You must bleed it out. 9. Slowly pull shaft out. 10. Unscrew the cap 3/4 turn and tilt the shock at a slight angle. 11. Slowly compress the shaft to push out excess oil and air. You should see bubbles coming out from under the cap. 12. With the shaft compressed, tighten the cap and re-check for pressure at the top of the stroke. If there is still pressure, repeat steps 9 thru11.

SHOC#K54F2LU2ID

SH#O5C4K2F2LUID

Step 1-3

Step 3-4

Step 5-6

NOTE: Build 4 complete shocks
x1 42080
Shock Cap, Enduro

Step 7

Step 8-12

GATE 03 SHOCK BUILD: BAG 9
NOTE: Seat O-Ring into the groove on the inside of the shock collar
SHOC#K54F2LU2ID
x1 42081
O-Ring, Large, Shock Collar

x1 42079
Shock Collar,
Black, Aluminum

x1 42089
Shock Spring,
Gray, 1.49 lb/in, 63mm

3mm
x1 42080
Shock Spring Cup
NOTE: Build 4 complete shocks

14
GATE 04 SHOCK BUILD: BAG 9
42041 x1
Pivot Ball

x1 42041
Pivot Ball, Upper Shock
x1 42260
3x1mm Spacer
x1 89203
3x16mm BHCS
x1 25187
3x14mm BHCS

GATE 01 BUMPER BUILD: BAG 10
x1 42146
Trail Walker Bumper, Front

x2 42146
Trail Walker
Bumper, Mount

42041 x1
Pivot Ball

x1 42041
Pivot Ball, Upper Shock
x1 42260
3x1mm Spacer
x1 89203
3x16mm BHCS
x1 25187
3x14mm BHCS

41086 x2
2.5x16mm
SHCS

x1 42146
Trail Walker
Fairlead

x2 31532

3x8mm,

x2 42146

BHCS

D-Ring,

Molded

GATE 01 WHEEL/TIRE BUILD

x1 42177

The Ocho Inner Wheel, Bronze

x1

42106

Tire, General

Grabber X3
x1 42106

Tire, Insert

x1 42177
The Ocho
Hex Adapter, Bronze

x1 42177
The Ocho
Ring, Bronze

Wheels #42108 – The Ocho Wheels, 1.9″ Silver #42109 – The Ocho Wheels, 1.9″ Black #42177 – The Ocho Wheels, 1.9″ Bronze

x1 42177
The Ocho
Outer Wheel, Bronze

x2 89203
3x16mm
BHCS

NOTE: Install #41088 screws in
a crossing pattern
1

6

3

4

5

2

x6 41088
2.6x10mm
BHCS

NOTE: Build 4 wheels/tires

33.657120, -117.701139

15

GATE 02 WHEEL/TIRE BUILD

GATE 01

BODY BUILD: BAG 11
NOTE: Install 4 body mounts
x2 42009
Body Mount, Short Pin

Front Post Rear Post

x2 25391
FT M4 Locknut,
Blue

x2 42109
The Ocho
Nut Cap, Black

NOTE: Install 4 wheels/tires

x2 89202
3x12mm
BHCS

x1 42131
Utility Bed,
Cage, Bottom

x2 42022
Screw Pin
GATE 02 BODY BUILD: BAG 11

89202 x4
3x12mm
BHCS

x1 42131
Utility Bed,
Cage, Hoop

4673 x4
2.5x4mm
BHCS

x2 42131
Utility Bed, Cage, L/R
x1 42131
Utility Bed, Floor

16

GATE 03 BODY BUILD: BAG 11
x2 42125
Sendero Windshield Wiper Blade

31509 x2
2x3mm BHCS
NOTE: Install body clip and o-ring inside the body

21173 x2
Body Clip,
Small

x1 42120
Sendero Body,

Cab, Clear
x1 See Chart
Sendero HD

42125 x2
Sendero
LED Mount

Body Set

42125 x2
Sendero

Headlight

x2 7187

Lense

2x8mm

SHCS

x2 42125
Side Mirror,

Black

x2 42125

42125 x1
Sendero

Side Mirror Grill, Black

Mount, Black

x2 5407
O-Ring

41079 x2
2.5x6mm
SHCS

x7 31531
3x6mm
BHCS

x1 42125

Sendero Grill

Backing Plate

x2 42125

Sendero Headlight

Bucket

NOTE: Install light buckets

x2 42125
Sendero Turn

and hardware inside the body

Signal Lense

GATE 04 BODY BUILD: BAG 11

42131 x1
Utility Bed,
Mounting Plate
25202 x2
3x10mm
FHCS
89209 x2
3x18mm
FHCS

x4 42120
Sendero Body, Bed Mount
x4 25203
3x12mm, FHCS

GATE 05

WHEELBASE CHART WB FRONT UPPER FRONT LOWER REAR UPPER 11.8″ 93mm 100mm 93mm

42184 #42185 #42184 #42186

12.0″ 93mm 100mm 100mm #42184 #42185 #42185 #42186
12.3″ 93mm 100mm 108mm #42184 #42185 #42187 #42186
12.8″ 93mm 100mm 121mm #42184 #42185 #42191 #42186

REAR LOWER 100mm #42185 #42186 108mm #42187 #42188 114mm #42189 #42190 127mm

42192 #42193

Items Needed for Links:

42040 – Rod Ends

Panhard Links [CMS]: Servo on Axle Links

Panhard – #42183

[SOA]:

Steering Input – #42182 Links – #42323

Steering Link – #42180 Steering Link – #42180

6332 x4
Body Clips
Bodies #42178 – Sendero HD Body Set, Titanium #42120 – Sendero Body Set, Clear

42122 – Sendero Decal #42125 – Sendero Body Accessories #42131 – Sendero

Utility Bed #42194 – Sendero HD Body Set, Black #42235 – Sendero HD Body Set, Red
NOTE: Install bed mounts and 3x12mm FHCS inside the body
73mm
83mm
93mm
96mm
100mm
108mm
114mm
121mm
127mm

33.657120, -117.701139

17

GATE 01 STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING REAR (STOCK)
OVERDRIVE: Overdrive is a scenario where the front and rear wheels do not rotate at the same speed. The Stealth X gearbox is designed to allow the front wheels to spin faster than the rear wheels. Overdrive is advantageouse when climbing up rock faces because the front tires will want to pull the vehicle up the rock. On desents, the rear tires rotating slower than the front tires will help keep the chassis more stable and keep the rear tires planted on the ground.
Stealth X: The Stealth X gearbox allows the driver to change the front to rear drive ratios with 3 separate ratio adjustments to the rear drive shaft. The driver has the option to flip the gearbox direction (motor mount facing the front) the optional inverse top shaft (#42024) is required.
Please Note: The 20T top shaft, 28T idler gear, and 52T drive gear will always be meshed together in all 6 gearbox configurations.

GATE 02 STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING REAR (STOCK)

1:1 (No Over Drive)

Over Drive Option 1 (Stock)

Over Drive Option 2

20T 28T

52T

28T

52T

20T 28T

52T

27T

53T

20T 28T

52T

26T

54T

Front Of Vehicle

Rear Of Vehicle

GATE 03 STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING FRONT (OPTIONAL – REQUIRES #42024 – TOP SHAFT )

1:1 (No Over Drive)

Over Drive Option 1 (Stock)

Over Drive Option 2

52T

28T 20T

52T

28T

Front Of Vehicle

52T

28T 20T

53T

27T

52T

28T 20T

54T

26T

Rear Of Vehicle

ASSOCIATED ELECTRICS, INC. 21062 BAKE PARKWAY. LAKE FOREST, CA 92630 USA
CALL: 949-544-7500 – FAX: 949-544-7501 CHECK OUT THE FOLLOWING WEB SITES FOR ALL OF OUR KITS, CURRENT PRODUCTS, NEW RELEASES, SETUP HELP, TIPS, AND RACING INFO!
WWW.ASSOCIATEDELECTRICS.COM #112149

ElementRC

@Element_RC

References

• Champions By Design
• Your Journey Begins Here! | Associated Electrics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>