element K22 Barcode Scanner Installation Guide
- May 15, 2024
- Element
Table of Contents
element K22 Barcode Scanner
Specifications
- Model: K22 Barcode Scanner
- Accessories included:
- 1x Barcode Scanner
- 2x M3x6 Screw
Product Usage Instructions
- The location to mount the barcode scanner is on the left side of the rear touch computer in either portrait or landscape.
- Remove the side cover from the touch computer.
- Connect the barcode scanner cable to the touch computer.
- Gently attach the barcode scanner to the touch computer and make sure the connector is properly aligned and mated.
- Secure the barcode scanner with the included two M3x6 screws tothe touch computer.
Default Settings
The K22 Barcode Scanner is ready to use in its default mode with
the following parameters:
- USB Serial Interface
- Beeper Volume: Low, Medium, High
- Keyboard Country Layout: United States, French, German
- Presentation Mode: Streaming Presentation, Extend
- Reset: Normal, Enhanced, Mobile Phone
- Off Italian
Accessories
Installation
If you plan to use the scanner as a virtual serial port, please go to the
Element website to verify you have the latest VCOM port drivers before
starting the installation of this device.
https://www.elementpos.co/downloads
-
The location to mount the barcode scanner is on the left side of the rear touch computer in either portrait or landscape.
Element K22 Barcode Scanner Quick Installation Guide I Page 2 of 6 -
Remove the side cover from the touch computer.
-
Connect the barcode scanner cable to the touch computer.
-
Gently attach the barcode scanner on the touch computer and make sure the connector is properly aligned and mated.
-
Secure the barcode scanner with the included two M3x6 screws to the touch computer.
Default Settings
Element Barcode Scanner Default Setting
The K22 Barcode Scanner is ready to use in its default mode. The default
parameters are: Back to Element Default Setting
USB
FAQ
- Q: Where can I find the latest VCOM port drivers for using the scanner as a virtual serial port?
- A: You can download the latest VCOM port drivers from the Element website at https://www.elementpos.co/downloads.