ZKTeco SLG410 Zigbee Gateway for Wireless Hotel Lock User Guide
- June 6, 2024
- ZKTECO
Table of Contents
Quick Start Guide
Model: SLG410
Version: 1.0
Configuring the SLG410 gateway
1. Connect the power cable to the gateway.
2. Connect PC with gateway LAN port by network cable and WAN port with the
router, respectively. Both the LAN and WAN LED will blink on the gateway.
3. Configure your PC to Obtain an IP address automatically in TCP/IPv4
setting.
4. Input the default gateway IP address 192.168.82.1 in the web browser to enter the gateway login page. (Default login password is admin )
5. After login, the following page shows up:
6. Select the WAN Setting option to configure a network IP to provide a
network to gateway, then follow the step as below:
(1) Choose the “Static IP” option in WAN Type, then fill out the appropriate
IP address which is able to access internet. And lick “Netmask” and
“Gateway bar”, they will fill out automatically, if no, please fill out
manually. (e.g. 192.168.132.250).
(2) Click OK to save. After a successful connection, the gateway configures automatically, and the Router Status page changes as shown below.
7. Select Administrator option, to configure Remote IP and server port.
(1) The IP is the local IP address of client’s PC in which the
ZKBioHLMS software is installed. The server port is 18088 by default.
(2) Click OK to save and it will remind success.
8. Login to the ZKBioHLMS to add the gateway to the platform.
(1) Click Hotel- >Device Mgnt->Device->Search.
(2) Click Search button to search the gateway and add the configured one.
(3) Edit the Gateway Name and click OK. Then click Refresh, the
gateway will appear on the page.
ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 – 82109991
Fax : +86 755 – 89602394
www.zkteco.com
Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>