QFX LCS-120 Bluetooth Rechargeable Portable Speakerv Instruction Manual

June 6, 2024
QFX

QFX

QFX LCS-120 Bluetooth Rechargeable Portable Speaker

QFX LCS-120 Bluetooth Rechargeable Portable Speaker

6 – STEP SETUP GUIDE

Overview-001

  1. Find the AC Power cord to the LCS-120 located in the packaging and connect it to the 100-240V 60Hz input.
  2. Find a power outlet (AC 120V/60Hz) and connect the AC power cord to the socket to supply the unit with power.
  3. On the bottom right of the control panel set the POWER switch to the ON position. The unit should turn ON and begin charging.
  4. Insert a USB flash drive in the USB port located Left side of the panel.The LCS-120 will automatically begin playing the .mp3 content from the USB.
  5. Use the VOLUME knob to adjust the the overal volume. Use the TREBLE and BASS control to shape the sound.
  6. Use the Forward and Rewind keys to move to the next track or previous track. If in FM mode, these keys will change the radio sation.

Overview-002

LCS-120 BLUETOOTH
Bluetooth Mode: Use the MODE button to enable Bluetooth on the LCS-120. Open the Bluetooth settings on your mobile device and search for LCS-120. Select the option to pair both devices together. You can now sit back and enjoy the music from your favorite app. You won’t need reconnect the Bluetooth again when switching through modes.

LCS-120 FM RADIO:
FM Radio: Frequency-Modulated stations operate in a frequency band extending from 87.8 MHz to 108 MHz.
Use the MODE button to select the FM mode. In FM mode, press and hold the Play/Pause button to scan available frequencies in the area.

LCS-120 TWS CONNECTION:
TWS Wireless Bluetooth Connection: Enable Bluetooth mode on both speakers. Press and hold the TWS button on one of the speakers to sync both units together (they must be the same make and model to function). On your mobile device under the Bluetooth menu, search for LCS-120 and connect. Open your favorite music app and enjoy True Wireless Stereo. To Exit TWS press and hold the TWS button.

IMPORTANT SAFETY MEASURES

Before using this machine, please read all the safety and operating instructions. These safety and operating instructions should be kept in condition of consultation.

Safety

  1. Electric Power Supply Line: Keep the power cord safe from being trampled on, pressed on by heavy objects, or pierced. Make sure that the cord has ample space to rest on the ground and is not stressed. DO NOT pull or drag or the power supply line.
  2. Ventilation: This unit must be set in a ventilated space. DO NOT cover the vents on the back panel for any reason. If placed alongside a wall, distance the unit a minimum of 10cm to allow air flow. DO NOT surface that might restricted good air flow.
  3. Dismantling: DO NOT dismantle or open the unit. This is a high-powered unit that can cause serious harm if tampered with. DO NOT Open.
  4. Smoke: Please unplug the power supplies cord from the wall outlet immediately if unusual smoke appears and contact customer support

WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids, heat sources such as radiators, heat registers or under extreme weather conditions. Clean only with a dry cloth.
Users should exhibit extra safety when the WARNING or CAUTION symbol appears in this instruction manual and follow all precautions as they are stated.

LCS-120 BATTERY
The LCS-120 is an acid battery powered PA loudspeaker.
Be sure that you have completely charged the battery prior to first use to maxi-mize the battery’s lifespan. Once the power cord is connected to a power source it will automatically begin charging (4~6 hours to fully charge the acid battery). If the battery power is low, connect it to a power source to power on. When the battery is low, the battery indicator light will turn ON. When the battery is fully charged the light will turn OFF. Disconnect the power cable once the battery is completely charged. With standard usage, a fully charged battery can play for about 2~4 hours. The battery can be recharged about 300 times in its lifetime. When not in use, the speaker should always be turned OFF to prevent the unit from draining the battery. When the unit is not in used for prolonged periods of time, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 60 days.

CONTROL PANEL and TWS

Control-Panel

  1. MODE: Toggle between AUX, USB, TF, FM, BT.
  2. LED MODE: Switch through 5 different light modes.
  3. M.PRI: Microphone Priority ON/OFF.
  4. PREVIOUS: Select previous track.
  5.  PLAY/PAUS/TWS: Play or pause the current track. TWS sync button.
  6. NEXT: Select next track.
  7. POWER SWITCH: ON/OFF.
  8. LED SWITCH: ON/OFF.
  9. TRIGGER PADS: KICK /CLAP/ FILL/HORN/XRATX/ FADE.
  10. USB/TF PORTS: Insert an USB or TF card for music playback.USB 5V mobile charge.
  11. AUX INPUT: 3.5mm (TRS) jack.
  12. RCA INPUT: RCA audio input.
  13. RCA Output: RCA audio output.
  14. MIC INPUT 1&2: 6.35mm (TS/TRS) jack.
  15. GUITAR INPUT: 6.35mm (TS) jack.
  16. DC 12V INPUT: External Input.
  17. POWER SUPPLY: 100V-240V 50Hz-60Hz.
  18.  LED CHARGE: Battery light indicator.
  19. MASTER VOLUME: Adjust from Min to Max
  20. TREBLE: Boost Treble frequencies.
  21. BASS: Boost Bass frequencies
  22. MIC VOL: Adjust from Min to Max.
  23. MIC TREBLE: Adjust from Min to Max
  24.  MIC BASS: Adjust from Min to Max
  25. MIC ECHO: Adjust from Min to Max
  26. GUITAR VOL: Adjust from Min to Max
  27. DISPLAY: Displays Mode information

TWS CONNECTION

TWS connection: TWS Connection is only for two speakers of the same make and model.TWS Connection

  1. Turn ON both units and enable Bluetooth mode on both speakers.
  2. Press and hold the TWS button on one of the speakers to sync both units together(they must be the same make and model to function).
  3. On your mobile device under the Bluetooth settings, search for LCS-120 and connect.
  4. Open your favorite music app and enjoy True Wireless Stereo.
  5. To Exit TWS press and hold the TWS button.

REMOTE CONTROL

  1. MUTE: Mute the track.
  2. MODE: Toggle between USB, TF, FM, AUX, BT
  3. REC: Start recording
  4. REC PLAY: Playback the recorded file.
  5. PLAY/PAUSE (Press to Scan Channel in FM Mode)
  6. PREVIOUS: Select pervious track or channel
  7. NEXT: Select the next track or channel.
  8. VOL-: Reduce the master volume
  9. VOL+: Increase the master volume
  10. REP: Repeat the playing track.
  11. EQ: Select EQ mode.
  12. NUMBER KEYS: 0-9

LCS-120 DISPLAY SYSTEM SETTINGS

  1. Input Mode: The LED display screen will display the information of input mode for USB/TF/BT/AUX /FM. When a USB flash drive/TF Card is inserted, the unit will automatically switch to USB/TF mode and begin playing Mp3 content.
  2. Track Number: The track number currently playing from the USB/TF will display.
  3. FM Mode: All FM channels are displayed here. Press “Play/Pause/TWS” button for auto scan. Use the Next and Prev button to change FM station.

LCS-120 RECORDING FUNCTION
Insert a USB/TF card in the slot and connect the microphone to the unit.

  • Press and hold the Previous Button for 3 seconds to start recording sound.
  • Press and hold the Next Track Button for 3 seconds to play the recording file.
  • Press and hold the Next Track Button for 3 seconds to exit recording function.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals