SALUS SPE868 Smart Plug Instruction Manual
- June 6, 2024
- SALUS
Table of Contents
Smart Plug
Model: SPE868
Installation Manual
Introduction
Smart Plugs go directly into an open outlet (like an extension of the outlet) giving a user connected control over the device plugged into the equipment. Use it with RF thermostats to control the electric heating in your house.
Product Compliance
This product complies with 2011/65/EU and Radio Equipment Directive (RAD)
2014/53/ EU. Full text of the EU Declaration of Conformity on
www.saluslegal.com.
868.0-868.6MHz; <13dBm
Safety Information
Use in accordance with the regulations. Indoor use only. Keep your equipment
completely dry. Disconnect your equipment before cleaning it with a dry
towel.
Once plugged in, the LED will be flashing red, meaning it is in pairing mode.
| Smart Plug LED meaning
---|---
| Solid Red – paired, a smart plug is off
| Solid Green – paired, a smart plug is on
| • Pulsating red – waiting for pairing
• Slow Flash red – overheat protection
• Flashing red – safe mode, lost connection with thermostat and smart plug is
off
| Flashing Green – in test pairing mode
| Flashing Red and Green – fail-safe mode, lost connection with thermostat, a
smart plug is on
If the thermostat loses connection with the Smart Plug, the Smart plug goes into fail-safe mode after 22 minutes. In this mode, you still can operate your Smart plug manually (by pressing the button on the device).
FR/ NL / DE:
support@salus-controls.de
tel: +49 6108 8258515
Head Office:
SALUS Controls Plc
Units 8-10 Northfield
Business Park
Forge Way, Parkgate, Rotherham
S60 1SD, United Kingdom
T: +44 (0) 1226 323961
E: sales@salus-tech.com 
www.salus-controls.com
SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product development SALUS Controls plc
reserves the right to change specification, design, and materials of products
listed in
this brochure without prior notice.
For the PDF Installation guide please go to
www.salus-manuals.com
Issue Date: V 2020
V011
EN Pairing process Power up the
device you want to pair the plug with.
Once paired, the LED on the plug will go steady red.
elektrische verwarming in uw huis te regelen.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>