QFX PBX-1212 110-240V Portable Party Speaker User Manual

QFX PBX-1212 110-240V Portable Party Speaker User Manual

USER MANUAL

3- CHARGING THE SPEAKER

1. Full recharge takes 8-12 hours
2. Please use the supplied charging cable to charge the speaker.
3. When you are using your unit while it is plugged to an external power source, battery switch can be ON or OFF.
4. To protect the lifespan of the built-in battery, be sure to fully charge your unit on the same day the battery runs out. Not charging your unit right away can affect the performance of the battery.

4- WIRED MICROPHONE INSTRUCTIONS

1. lnsert the microphone plug into the microphone input jack.
2. Adjust the microphone volume knob MIC VOL for proper volume.
3. Adjust the echo depth to the proper position.
4. Now you can start using your microphone.

5- WIRELESS CONNECTION

You can connect your compatible wireless devices such as a call phone, computer etc., to listen to your audio tracks from this speaker.
Press the MODE button on the speaker, or press the MODE button on the remote control to enter wireless mode, indicated on the LED display.
Using the native controls on your device, select “PBX-8122” in your settings to pair, and once successful, you will hear a sound of notice on the speaker..

6-TWS FUNCTION

1. Turn on both devices of the same model and switch both devices to Bluetooth mode.
2. The distance between the two units is within 50 CM.
3. Select one as the host (any one can) press the MODE button for 3 seconds, and start to connect when the connection is successful, and the USB display “BLUE” of the slave is bright.
4. Turn on the phone Bluetooth and connect to the QFX PBX-1212, the next two speakers will automatically connect to each other.
5. Disconnect TWS: Press and hold the MODE button for 3 seconds. TWS has been disconnected.

The exclamation mark inside an equilateral triangle is intended to alert user of the presence of the important operating and maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert User of the presence of un-insulated “hazardous voltage” within the product’s enclosure, which may
be of sufficient magnitude to induce a risk of electric shock to persons

NOTES:

Please do not attempt to open the back cover or power adapter as opening or removing the covers may expose you to dangerous voltage or other hazards, and it will also cause the restricted servicing to be disabled: There are no user servicing components inside.

USER MANUAL

Respectable users: Thank you for your support and trust on the products of our company. To fully exert the function of the product, we suggest you to read the operating instruction carefully before using it to avoid any unnecessary loss. If anything unclear,please contact the distributors directly.

1- CONTROL PANEL FUNCTIONS

1. LED POWER: Front LED light switch

2. POWER: Power On/Off button

3. MIC. VOL: Microphone volume

4. SD card input

5. GUITAR INPUT: Guitar input terminal

6. REC: Recording function

7. MIC PRIORIT Y

8. PREV/CH: Short press for Previous Track in Mp3 mode; Short press for previous channel in FM mode.

9. LED DISPLAY: LED display

10. PLAY/SCAN: Short press to play or pause in Mp3 mode; Short press to Auto Scan and Preset available frequencies in FM mode.

11. NEXT/CH+: Short press for next Track in Mp3 mode; Short press for next channel in FM mode.

12. MODE: Different mode transformtion TWS: Long press the MODE button to enable the TWS function

13. MIC. INPUT: Wired Microphone input

14. USB card input

15. MASTER VOLUME

16. BASS

17. TREBLE

18. ECHO: Microphone echo

19. GT. VOL: Guitar volume

20. DISCO BALL: Disco ball

21. AUDIO INPUT: Audio input

22. DC 12VINPUT: External DC 12V

23. AC INPUT:AC110-240V 50/60Hz

2- REMOTE CONTROL FUNCTIONS

1. Power On/Off:Turns the Power On/Off
2. Number: Number keypad sel ection
3. MUTE: Press to mute the Volume
4. REC: Recording
5. U/SD: signal input
6. REP: Press to repeat and/or shuffle
7. Press to Play or Pause
8. Previous Track
9.  Next Track
10. MODE: Switch the Media Input Mode
11. AUX: Aux signal input
12. FM: FM signal input
13. VOL+: Volume up
14. VOL- :Volume down
15. EQ: Choose preset Equalizer

PRECAUTIONS

To prevent operational problems or serious damage to the Speaker unit, please follow the below precautions:

1. Pull out the power cord from the end of the plug. Do not pull the wire.
2. The Speaker should be kept away from other heat sources.
3. Do not attempt to open the internal speaker unit or change the circuitry as this may cause the unit to be damaged or cause an electrical shock.
4.  If you are not going to use the unit for a long period of time, pull out the plug and store in a cool dry place. 5.Ensure the Speaker is properly ventilated & kept in a dry location. It is recommended that the speaker be kept about 4 inches away from any wall or object.
   WARNING : Do not use this Speaker in any wet location, in the rain or a location with high moisture. Do not place any liquids or other objects on the Speaker as this may cause an accidental short.

• Specifications are subject to change without notice.
• All Trademarks and trade names belong to their respective owners

STEP 2 PASO 2 ÉTAPE 2

When both speakers are in Bluetooth mode, push and hold the TWS button for 3 seconds. You will hear a beep. Next time you put both speakers in Bluetooth
mode at the same time, speakers will connect automatically.

STEP 3 PASO 3 ÉTAPE 3

On your device, turn your Bluetooth settings “ON”, you will then select “QFX PBX-8122”. Enjoy TWS
(True Wireless Stereo) sound from your phone via Bluetooth!

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>