QFX BT-600 Portable Bluetooth Music Pod Instruction Manual
- June 6, 2024
- QFX
Table of Contents
Product manual
Model No.:BT-600
Operate Instruction
The speaker must be turned on (Long Push the switch“ ”) before using any of the following modes.
1. Bluetooth Mode
- Turn the speaker on，a tone will be emitted to signal that it is ready to be paired with a Bluetooth-compatible device.
- Setting the Bluetooth of your phone and tablet PC (Please set it according to your own device）then begin searching Bluetooth mode and find the paring name “QFX BT-600” to pair.
- When the match is finished, there will be warn, you can play the music as you like by then, the searching time is different for the different branded devices, it takes about the one-minute in general condition.
- To unpair or remove a Bluetooth compatible device from the speaker, turn off the Bluetooth function on the device, the speaker can be paired with a new compatible device now.
Note: Once connected, sound can be controlled using either the speaker or the relevant controls on the Bluetooth-compatible device.
2. USB/ TF card Mode
- To use T F mode, insert a TF card (not included) into the TF card slot on the back of the speaker. The speaker will automatically change to TF mode.
- To use US B mode, insert a compatible USB drive into the USB port on the back of the speaker. The speaker will automatically change to USB mode.
- To a d d o r m i n u s t h e volume by pressing the”+” button and “-” button without moving your finger away.
- To switch the next song by pressing the button “+ ”and the last song by the ” – ” button shortly.
Note: If the speaker does not automatically change to TF or USB mode,
press “M” until the desired operation is selected.
3. Hand-free Mode
- To make sure your mobile phone and the speaker are connected.
- When there is calls get in, please press“
”to answer the call. - When you want to hand up the phone, press “ ” again.
4. Aux in Mode
Connect one end of the line in the Aux port on the speaker and the other end
to a MP3 player or another compatible audio source.
The speaker will automatically switch to Aux mode once the aux cable has been
inserted.
To change different functions, press the button“M”.
5. FM radio Mode
Connect the micro 5 pin end of the supplied USB charging cable to the unit and
the cable will work as an external antenna. Press the button “ ” into the FM
radio function.
To scan the F M frequency, press “
” button.
Note: Remove the USB/TF card while using the FM radio function.
6. To charge
Please insert the micro USB end of the charging cable into the port “DC 5V”
on the back of the speaker. The light keeps on when charging. The light turns
off once fully charged.
Carefully disconnect both ends of the USB charging cable and store it safely
for future use.
7. Things need to be careful
- Please read the manual carefully to make sure the safety of you and the speaker.
- Do not use the speaker in the environment of hot, dusty, or moist.
- Please avoid falling or strong bumps to keep the surface and Other hardware in good condition. When do not use the device for long time, please push the switch to “off”.
- Please turn off the device when inserting and extracting the TF card, this may destroy the device and lose the data on the TF card.
8. Dimension and Features
Output Power:10W (THD=10%)
Battery capacity: 1200mA
Frequency：20HZ-20KHZ
Transferring distance: ≥10meter （let depends on the Bluetooth device and the
environment)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>