DIGITAL LOCK Auxiliary Lock Premium Digital Door Lock User Manual

DIGITAL LOCK Auxiliary Lock Premium Digital Door Lock User Manual

Be sure to make door open annually in emergency case This product can be damaged when the door lock gets broken

1. General Information

2. Precautions

DANGEROUS

Please read the precautions thoroughly for your safety!

You should not dismantle randomly the product

• The digital product is assembled minutely and complicatedly in the inside.
• The random dismantlement may be dangerous besides making the troubles of the product.
• Consumer’s responsibility in case of random dismantlement

CAUTIONS

Prohibition of water cleaning

• It’s prohibited to clean with water because water cleaning may disturb an electronic circuit.
• It’s hoped that a dry towel is used for cleaning the product.

WARNING

The response measures to electric discharge of battery are as follows

• The usage period of battery is at most four months to eight months. (Based on the use of ten times a day) Exchange the battery at that time.
• Use 4 alkaline batteries of 1.Sv AA. (Rechargeable batteries unusable)
• In case of full discharge, it’s possible to open the door with touch-key and password with linking 9V alkaline battery to outdoor body terminal.

3. How to use

1. Password registration method

1. Open the battery cover on the indoor unit of the door lock (the indoor unit) with the door open, and press the button.
2. Enter the numbers you want on the number panel of the front unit. (3-12 digit numbers possible)
3. When you press “*”a notification sound (sounding “ppiririk”) will be heard and the entry will be completed.

After password registration, make sure it works

CAUTION

1. When you register passwords for the first time or change them, the door may be locked by mistake. Make sure to open the front door and carry a card, with you.
2. For the passwords, specify the 3 – 12 digit numbers, except for “* · and “#”
3. If you enter new passwords, the existing ones will be deleted.
4. When all products are delivered, their passwords are set into 1, 2. 3. 4 and 1.2,3,4,5,6,7.8,9,0
5. When you install a product for the first time, make sure the user enters the passwords himself/ herself.

2. Card registration method

1. Open the battery cover on the indoor unit of the door lock (the indoor unit) with the door open, and press the button twice.
2. On the screen. the numbers 1. 2, 3, 7. 8. 9 are lit. (If transmission module isn’t connected, only 1, 3. 7, 8. 9 are lit)
3. Press “1” – the numbers are blink on the screen
4. Hold the card near the reader (continuous registration possible), (Max. 50 cards)
5. Press the button on the indoor unit (the card registration finished). After card registration. make sure it works.

WARNING

For your safety, we recommend you to use all RF-card and Tag that manufacturer provide with. Hone Plus confirms that “ISO 14443 Type A~ certified RF-card and Tag to be used with the Digital door locks. We, Hone Plus, are not responsible with the cases that customers use other type RF-card and Tag, credit card, Smart card and Mobile phone.

3. Deletion of all the cards registered

1. Open the battery cover on the indoor unit of the door lock (the indoor part) with the door open, and press the button twice.

2. On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
   (If transmission module isn’t connected, only 1, 3, 7, 8, 9 are lit)

3. Press ·r -on the screen, ” # ” is lit (the card deletion ready )

4. When you press and hold  “# ” for 3 seconds, all the cards will be deleted, with a notification sound.

4. Fingerprint registration method (Option)

• Since the Fingerprint Identification Digital Door Lock is used as an authentication means, it guarantees no risk of loss, theft, or hacking. Also, this model uses a semiconductor method sensor so it is safe due to no residual fingerprint left on the sensor unit.
• When you register your fingerprint, you must register it four times. This thus reduces an identification error to the maximum.
• However. fingerprint registration may not be done, depending on the status of individual fingerprints.

5. Deletion of the whole fingerprint registered (Option)

1. Open the battery cover on the indoor unit of the door lock (the indoor part) with the door open, and press the button twice.

2. On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
   (If transmission module isn’t connected, only 1, 3, 7, 8, 9 are lit)

3. Press “9” – on the screen ” # ” is lit (the fingerprint deletion ready).

4. When you press and hold ” # ” for 3 seconds, the whole fingerprint will be deleted, with a notification sound.

6. Ways to set automatic locking / Manual locking

• Beep bee beep sound-Auto Setting
• Beep sound – Manual Setting
• When products are delivered, they are set into Auto Lock.

How to set into automatic lock
Press the OPEN / CLOSE button for more than 5 seconds and press the number ·1″ button. Then, a Beep bee beep sound comes out and the system is set into Auto Lock.

How to set into manual lock
Press the OPEN/ CLOSE button for more than 5 seconds and press the ·1″ button. Beep sound comes out and the system is set into manual lock.

7. Automatic locking time setting change method

How to set automatically closed time
Press and hold the Open/ Close button for at least 5 seconds, a notification sound is heard, press “8” first, press the number you want to set among the number ·1″ ~ “8” ( “5” for 5 seconds). and nrP  “*”

8. Way to lock the door manually

With releasing Auto-door close function, door does not close automatically and follow up as above.

9. High-pitched / Low-pitched sound change

1. Press and hold Open / Close on the indoor unit for at least 5 seconds.
2. Whenever pressing “9” on the outdoor part, the sound will change by level, from silence to a high-pitched sound.
3. Until the pitch wanted is heard (a total of 8 levels), press “9” and then “*”.

10. Forced locking function

Force lock from outside
Close the door and place your palm on numeric button for 3 sec then the number pad blink 3 times and this function is setup with “ppiririk” sound.
This is double lock when you leave home for a long time and inside buttons are not working.

► When “Force lock from outside” activated, “OPEN / CLOSE” button is not working.
► When “Force lock from outside” activated, it gets deactivated if you open the door from inside.
► When “Force lock from outside” activated, you can open the lock with password or card.

11. Way to open the door

Opening with the existing fake password

1. It is possible to use the fake number function for the front digit. Lastly, enter the password and “*” .
2. The number of digits must not be over 20.

Opening door with password from outside

Place hand on keypad or press Start button to lighten keypad. Press registered password and press “* ” or “#” to open door.

Manner Mode
Pressing Start button will activate manner mode, and door will open with no configuration alarm. (Auto-setting to non-manner mode after door opening)

■ When password is consecutively wrong for 5 times, warning alarm is notified and external button stops for 30 seconds.

12. Registration of remote controller (Communication device)(Optional)

13. Way to delete all the remote controllers (Communication devices) (Optional)

1. Open the battery cover on the indoor unit of the door lock (the indoor part) with the door open, and press the button twice.
2. On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
3. Press ·a· on the screen, “#” is lit (the remote controller deletion ready).
4. When you press and hold “#” for 3 seconds, all the remote controllers will be deleted, with a notification sound.

14. Way to register wireless transmission/ Reception communication device module for door lock (Optional)

15. Battery replacement method

1. Battery life time : 4M to 8M upon 10times using a day
2. Battery change alarm : Blinking red lights with melody. Open battery cover and replace all 4PCS of 1.SV AA at once. Make sure its polarity .
3. Emergency power supply : After battery is fully discharged, put USB Type-C adaptor on emergency power and open the door with password or RF card.

4. Product Features

5. Consumer support

• Then, in case of the carelessness of consumers and after the warranty period (one year). you need to pay for the repair.
• In case you have no the warranty card, you need to pay for NS, so you are required to keep it.
• The cost for repair includes the cost of parts and the business trip expenses.
• This compensation standard for damage follows the compensation regulation for consumer damage noticed by the Ministry of Finance and Economy.

Welcome your feedback

6. Warranty Service for Product Defects

Warranty card (for Company)

Thank you very much for purchasing our company’s digital door lock.
The quality assurance period is counted from the date of purchase.
Therefore be sure to have the date specified for sufficient service.

• This product is produced by the thorough quality management.
•  In case any troubles occur in the state of normal use within the warranty period, you can receive NS for free.
•  You are required to fill up the address, name and telephone number on the warranty card in time of bovine the product and to keen the card well.

New Standard of Premium Digital Door lock

Auxiliary lock User MANUAL

• You are kindly recommended to install the anticrime devices for the better and stronger security.
• It’s prohibited to dismantle, assemble and process the door lock with other purposes than installation and construction without a prior written approval from this Company.
• It’s possible to change the products and their manuals without prior notice in order to upgrade their performance.

CAUTIONS

♣ To receive our full warranty services, pleases make an entry of all the items in a quality assurance.
♣ If you do not make the entry, you must pay even during our warranty period.
♣ In the event of malfunctions due to condensation and moisture, you must pay for warranty services.

• For problems due to condensation or with installation, you must pay for the services.
• In the event you have forgotten passwords, or have lost a card/a manual key, you must pay for the services.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>