Shenzhen Dragon Brothers Digital Lock GQ10 Bluetooth Bike Cable Lock Instructions
- June 5, 2024
- Shenzhen Dragon Brothers Digital Lock
Table of Contents
Shenzhen Dragon Brothers Digital Lock GQ10 Bluetooth Bike Cable Lock
Preface
- Dear Customer, thank you for buying our smart lock.
- In order to experience our product better, please read the manual carefully, Wish you a pleasant experience.
APP
- Kindly Remind: Please input * OKLOK ” in Google Playstore (Android) or APP Store(1OS) to download the APP.
Register
- Registering by E-mail address: Click Register-Input E-mal address-Get verification code-Set password-Log in
Kindly Remind
- if the email box does not receive the verification code, please wait 1-3 minutes, there may be a network delay, and check whether the mail is sent to the junk mailbox.
- Because [email protected] is the address of the mailbox that is often used for registration and reset, it May is defined as an ad mailbox, which can be found in the junk mailbox.
Homepage Introduction
Add Lock
- Please wake up the Bluetooth signal before unlocking (red light flashes when the device is working)
- Press the button to wake up the bluetooth signal for the Bluetooth lock
- Touch the button to wake up the Bluetooth signal for fingerprint lock
Detail of the lock
Fingerprint setting
- Only the administrator has authority, the administrator
- The default is the first user to bind the lock
- You can unlock by fingerprint after registering your fingerprint successfully.
- The red light indicates an unlocked fail. Please try again!
Device Record
My Friends list
- Your friend must want to download the APP and register an account.
Personal Center
Attention
Q1:How to download the app
- A1: If you receive the product, In order for you to use the latest features of this Smart lock is recommended to search for OKLOK in google play the app store to download the latest version of the software This is perfect to use.
Q2:Currently only registered accounts are allowed to register via email.
- Enter the email address and to get the verification code
- A2: House connects to the network (WiFi or cellular network), restart the software, and try again
Q3: f the verification code is sent successfully, the mailbox will not receive the verification code
- A3: Because [email protected] is the address of the mailbox that is often used for registration and reset, it May be defined as an ad mailbox, which can be found in the junk mailbox
Q4: After installing the app. you need to get camera permissions and get the location
- Th Get tacts etc nao Disabled. Samsung the QR code requires will record the tie and share it with Friern get tne cOntact
Q5: After the fingerprint is successfully registered, the fingerprint camote be locked
- AS: When registering. please use the same thumb to take 6 fingerprints according to the prompt
Q6- How long does this battery last?
- A6: This lock is a low-power 3C product. You must touch the fingerprint head with Due thumb before unlocking Activate BT and devices After the lock s completed, will enter the sleep state within 3-5s.
Warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference and
- this device must accept any interference received including interference that may cause undesired operation.