ENSTO ECO16BT-EX Floor Heating Thermostat User Guide

ENSTO ECO16BT-EX Floor Heating Thermostat

Product Information

Quick Guide Floor Heating Thermostat ECO16BT-EX
The Quick Guide Floor Heating Thermostat ECO16BT-EX is a user-friendly thermostat designed for controlling floor heating systems. It features a switch for power control, LED indicators for status display, a Bluetooth button for pairing and resetting, and an adjustment knob for temperature control.

• A Switch: The down position powers on the thermostat, while the up position powers it off.
• B LED indicator B: The green light indicates that the thermostat is on and the heating is off. The red light indicates that the heating is on.
• C LED indicator C: The blue light flashes during Bluetooth pairing process, remains static when temperature change is activated, and flashes fast when resetting to factory defaults.
• D Bluetooth button: Located under the adjustment knob, this button is used for Bluetooth pairing and resetting.
• E Adjustment knob: Turning the knob clockwise raises the temperature, while turning it counter-clockwise lowers the temperature.

Note : If the blue and red LED indicators flash alternately, it indicates a faulty floor sensor.

Product Usage Instructions

1. Ensure that the power supply to the floor heating system is turned on.
2. To power on the thermostat, slide the switch to the down position.
3. The green LED indicator should light up, indicating that the thermostat is on and the heating is off.
4. If you want to turn on the heating, slide the switch to the up position. The red LED indicator will light up, indicating that the heating is on.
5. To adjust the temperature, use the adjustment knob located next to the LED indicators.
6. Turn the adjustment knob clockwise to raise the temperature and counter-clockwise to lower the temperature.
7. If you wish to pair the thermostat with a Bluetooth device, press the Bluetooth button located under the adjustment knob. The blue LED indicator will start flashing, indicating that the pairing process is in progress.
8. If you need to reset the thermostat to its factory defaults, press and hold the Bluetooth button until the blue LED indicator starts flashing fast.
9. If the blue and red LED indicators flash alternately, it means there is a problem with the floor sensor. Contact Ensto Building Systems Finland Oy for assistance.

DESCRIPTION

• A Switch
  • Down: power is on
  • Up: power is off
• B LED indicator B
  • Green: the thermostat is on and the heating is off
  • Red: the heating is on
• C LED indicator C
  • Blue flashing: Bluetooth pairing is in progress
  • Blue static: temperature change is activated
  • Blue flashing fast: resetting to factory defaults
• D Bluetooth button is under the adjustment kno (E)
• E Adjustment knob
  • Turn clockwise: the temperature rises
  • Turn counter-clockwise: the temperature drops

Note!

• Blue and red LED indicator flashes alternately: faulty floor sensor

Ensto Building Systems Finland Oy | Ensio Miettisen katu 2 | P.O.Box 77 | 06101 Porvoo, Finland | tel. +358 204 76 21 | buildingsystems@ensto.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>