atomberg Studio+ 1200mm BLDC Motor Energy Saving Ceiling Fan Instruction Manual
- June 5, 2024
- atomberg
Table of Contents
atomberg Studio+ 1200mm BLDC Motor Energy Saving Ceiling Fan
Function
Eliminate the regulator by using a direct connection from the switch to the fan. SLEEP mode adds smart comfort, as the temperature drops over the night and if you wish to auto-reduce the speed. With TIMER mode, you can switch OFF or switch ON the fan automatically after set hours to further save energy.
CONTROL FAN SPEED WITHOUT REMOTE
The fan’s main switch can be used to control its speed. Turn the fan’s
switch OFF & ON repeatedly to set the fan to the desired speed. Delay between
the toggling between the OFF and ON buttons should be approximately 1 second.
If toggling is too fast or too slow, it will not work. While toggling, the
LEDs will glow to indicate the speed of the fan. Refer to the below table to
control the fan using the switch.
TROUBLESHOOTING
Your ceiling fan is designed to be long-lasting with a strong body and well- tested electronics, however, 1f any problem arises, please refer to the guidelines shared Please contact a loca electrician or service engineer if you need any help
MAINTENANCE
Periodic cleaning of your ceiling fan is the only maintenance needed. When cleaning, .use only a soft lint-free cloth or brush to avoid scratching the smooth paint finish. You can use moist cloth to remove stains if any. However,do not use water directly. Abrasive cleaning agents are not required and should be avoided to prevent damage to the outer finishing.
Dear Customer, Congratulations on the purchase of ATOMBERG’S super-efficient STUDIO+ ceiling fan. Please read th s guide before using this product.
PACKAGE CONTENTS
Dot install or use fan if any part is damaged or missing. This product is designed to be used only with those parts or accessories supplied with this product and/or any accessories designed especially for use with this product by Atombe rg. Any such use of other parts or accessories may turn the product warranty null and void and may result in personal injury or property damage as well.
SAFETY INSTRUCTIONS
Be careful of the fan and blades while cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan before servicing. Do not modify t e blade design to change the airflow
FEATURES
India’s most energy-efficient STUDIO+ ceiling fan More than 65% energy saving as compared to an ordinary fan Highest service value (air delivery/power consumed) in India Runs 3 times longer on inverter resulting in longer battery runtime Smart sensorless algorithm for greater reliability No heating of fan even after long hours of runtime, resulting in an extra-long life Consistent speed even at low voltages Easy speed controls using a smart remote LED indications for easy remote use TIMER feature automatically switches OFF the fan when fan is running state and switches ON the fan when fan is in OFF state SLEEP will work for only 4 hour of Sleep keypress. For the first 2 hours, it will reduce speed by 1, and then after the next 2 hours, it will be reduced by 1 speed Full copper motor and double ball-bearing for better stability and longer life Aluminum body and blade, resulting in zero rust Zinc-plated parts and accessories for rust-free life Protective coating over electronics for better resistance against moisture All fans are tested for durability in extreme conditions before shipping.
BIG ENERGY SAVINGS
Stomberg is India’s most energy-efficient ceiling fan. A super-efficient BLDC
motor technology is used, which consumes very little energy. Atomberg fans
consume just 1/3rd of the power used by ordinary induction fans. Ordinary
induction fans run on 75W, whereas Atomberg fans run on just 28W at full
speed. There is huge saving potential for households, and institutions such as
hospitals, colleges, schools and commercial spaces.
INSTALLATION
**Assembly
**
Mandatory Step
Bypass r eliminate the re ulator from the connection before installing on
Stomberg
- Carefully remove the motor from the box and keep it on soft padding to prevent it from getting scratched.
- Insert both the anopy into the shaft and securely, attach the shack le to the hanger or ceiling hook using the screws provided with the package. Fasten the nut, and make sure that you fit the safety nut, washer and the R-pin to prevent slipping. Adjust the top canopy so that it covers both the assembly and the connection
- Align the holes on the blade shank with the motor holes. Securely fasten the blades with the screws and washer provided.
HOW TO HANG THE FAN
Insert the sere to assemble the shaft and the down rod. Insert the washer, nut and R-Pin in the sequence depicted in the illustration below Pull down the canopy to cover the connector box.
USING YOUR CEILING FAN
Congratulations’ You have successfully installed your new ceiling fan using the instructions provided in this guide.
- Restore the electrical
- Power ‘ON’ the ceiling fan using the switch on the panel in the room. The LED indicator flashes ‘ON’ when the power supply is restored.
- Use your remote to operate the ceiling fan.
- If you are leaving the room or facility for a long duration or on holiday, then power ‘OFF ‘ the ceiling fan using the switch on the
HOW TO USE YOUR REMOTE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>