belife B1EWW6vlK3L Vacuum Cleaner User Manual
- June 13, 2024
- BELIFE
Table of Contents
Love life as it is
B1EWW6vlK3L Vacuum Cleaner
Contact us if you have any questions:
Belifehome@outlook.com
401-300-0032 9am-5pm (CDT) WEEKDAY
Assembly
Align the main body, extension rod and the cleaning tool as shown and insert until they “click”. To remove any attachments/ accessories, press and hold the button, and pull to remove.
NOTE: All attachment included are compatible with the main body and the extension rod.
Turn on the vacuum cleaner
-
Pull the trigger to turn on.
Standard suction mode is the default. -
Pull the trigger again to switch it off.
Troubleshooting
Digital Display panel
| Indicator | Meaning | Suggested Solutions |
|---|---|---|
| Suction blockage | Clean filter regularly. |
● Remove hair and foreign objects from the brush. Remove compressed hair
strains from the bearing. Refer to Maintenance section.
● Check and remove any foreign object at the floor brush, extension rod,
main body air inlet and dirt bin.
● Please follow instructions on page 3-4 to clean up and keep the inlet and
outlet air ducts free from blockage.
| Brush stuck| ● Remove any foreign objects that cause thebrush to cut off
power automatically.
● If there is no foreign object (it may have dropped off), restart the vacuum.
| Voltage problem| ● This problem is caused by faulty battery. Please contact
us and we will replace the battery for you.
| The screen not light up after a few seconds when fully charged| ● This
problem is caused by faulty battery. Please contact us and we will replace the
battery for you
NOTE: If you have any other questions, please contact us and we will solve them for you.
Mode suggested
| Min Mode| ● 40min runtime, Suitable for hair and dust on wood floor or
tile.
---|---|---
| Mid Mode| ● 30min runtime, Suitable for fine dust and hair on low pile
carpet.
| Max mode| ● 10-15min runtime, Suitable for dog food, coffee beans and other
large particles
on low pile carpet.
Cleaning the cyclone unit
Cleaning frequency: Whenever needed.
WARNING! Never attempt to disassemble the sealed cyclone unit.
Cleaning the HEPA filter
Cleaning frequency: 3-6 month or whenever airflow is weak. 
Cleaning the pre-motor filter
Cleaning frequency: 1-2 months or whenever airflow is weak. 
WARNING!
- DO NOT brush any part of the porous filtration material.
- DO NOT soak any filter in water for more than 10 minutes.
- DO NOT wash any other part of the vacuum except the spcecifed filter assembly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>