CANYON TWS-3 True Wireless Stereo Headset User Guide

True Wireless Stereo Headset TWS-3
Quick Guide v 1.1

Package Device overview Pairing Charging

Features

• Bluetrum BT 5.0
• Profiles: HFP, AVRCP, A2DP
• Handsfree function
• Automatic pairing
• Up to 12 hours of work with charging case| • Time of recharging the charging case – 2 hours
• Battery capacity 35 mAh (earbud), 350 mAh (charging case)
• Charging input: Type-C
• Voice assistant
---|---

Pairing:

Take the earbud/earbuds from the case, they will automatically pair with each other. Go to Bluetooth settings of your Bluetooth audio device and select Canyon BT headset.

Reset to factory settings:

1. Take the earbud(s) from the case
2. Press and hold button(s) for 10 seconds until you hear the beeping sound twice
3. air the earbuds using the Bluetooth settings as described in “Pairing” section

Touch button:

1. Play/Pause music: Press the button on L/R earphone.
2. Previous track: Press 3 times on L earphone.
3. Next track: Press 3 times on R earphone.
4. Vol +: Press 2 times on R earphone.
5. Vol -: Press 2 times on L earphone.
6. Voice assistant function activation: Press and hold for 2 sec on L/R earphone.
7. Voice assistant function deactivation: Press and hold again for 2 sec on L/R earphone
8. Answering: Press the button once.
9. Rejecting the call: Press and hold the button for 2 seconds.
10. Ending the call: Press the button once

Charging the earbuds
To charge your earbuds put the BT earphones into the charging case. The earbuds will begin charging, indicated by a solid white LED glow. When the earbuds are fully charged, the LED will turn off.

Charging the charging case
To charge your charging case, plug the Type-C cable into the slot of the charging case. Plug the other end into a USB adapter. The case will automatically begin charging, indicated by a red LED Battery Indicator. When it is fully charged, the LED will be solid red.

Troubleshooting

The headset
cannot connect| Ensure that the earbuds are charged. Ensure that the devices are connected and the Bluetooth function in your device is ON. Switch the earbuds off and then switch them on again. Ensure that the headset is specified as a sound output device. Reset to factory settings and reconnect.
Distorted sound| Move the earphones closer to the device.
Check availability of wireless signals, which can make interferences, near your headset and device.
Adjust the sound volume on your earphones and device.
Switch the earphones off and then switch it on again.
Reset to factory settings and reconnect.

If the above actions cannot solve your problem, contact the support service at Canyon http://canyon.eu/ask-your-question/

SAFETY INSTRUCTIONS

Read and follow all instructions before the product use.

1. Protect the device against the high humidity as well as water and dust penetration. Do not use the device in very humid and dusty premises.
2. Protect the device against heating: Do not use it near heating devices and avoid direct sunlight.
3. The product shall be connected only to a corresponding power source. The type of the corresponding power source is specified in the operating manual. 4. Never spray liquid detergents. Use only dry clothes for device cleaning.

WARNINGS

1. The use of the earphones cannot be used with the high volume level within a ong time period can result in the temporary or continuous hearing loss.
2. The device dismantling is prohibited. We do not recommend to carry out any repair of this device. Unauthorized repairs result in warranty loss. According to local regulations, your product and/or its battery must be disposed of separately from household waste. When this product has reached the end of its service life, take it to a recycling facility designated by local authorities.

WARRANTY

The warranty period begins from the date of the product purchase from the Seller, authorized by Canyon. The date specified in your sales receipt or delivery note is the purchase date. During the warranty period, any repair, replace or repayment of a purchase value is made at the discretion of CANYON. To provide the warranty service, the product shall be returned to the Seller purchase location together with its proof of purchase (sales receipt or delivery note). The warranty period is 2 years after the product purchase by a customer. Service life: 2 years. For use and warranty details, visit http://canyon.eu/warranty-terms/

Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios http://canyon.eu

All other products names and trademarks are property of their respective owners. Smernice 2014/53/EU o shode racliovych zafizeni. Vice informaci an www.canyon.eu/certificates

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>