BliTZWOlF BW-IS11 WiFi Smart SIren Alarm User Manual
- June 6, 2024
- Blitzwolf
Table of Contents
BliTZWOlF BW-IS11 User Manual
At A Glance
Specification
Model: BW-IS11
Input: DC5V 1A
Interface: DC Port
Sound Level: ≥90dB@1m
Network Protocol: 2.4GHz Wi-Fi IEEE 802.11 b/g/n
APP Control: BlitzWolf/Tuya/Smart Life
Working Temperature: -10°C~ 50°C
Working Humidity: ≤85%
Dimensions: 90 x90x37 mm
Control Your Smart Device With The App
Reset And Enter Pairing Mode
Connector the power, hold on the button for 5s until the red indicator flashes the device is reset, and then enters pairing mode. A rapidly flashing indicator denotes EZ mode, a slowly flashing indicator denotes AP mode, press the button to switch to the desired pairing mode.
Install the BlitzWolf App
Find the “BlitzWolf” App on Apple App Store, Google Play, or scan the QR code below; and install it onto your smartphone.
“BlitzWolf” is compatible with iOS 8.0 + and Android 4.4 +.
Register or log in to the BlitzWolf App.
Connect Smart Device with App
EZ Mode Configuration (Recommend)
- After the device is powered on, open the “BlitzWolf” App, tap “+” and select “Add Manually” –> “Security & Sensors –> “Siren(Wi-Fi)”;
- Choose the 2.4GHz Wi-Fi network and enter the password, tap “Next”;
- Reset the smart device to enter EZ mode, then tick “Confirm indicator rapidly blink” and tap “Next”;
- Wait for the smart device to connect successfully;
- Tap “Completed”.
BlitzWolf APP Functions
Standard Operation: Once the Wi-Fi is connected. you can acquire the device’s status through push notification and share access with your family to ensure home safety.
Smart Linkage: Link with products such as smart cameras or sensors to select the state of the corresponding sound and light alarm when an alarm is triggered.
Note: Press the reset button one time to enter self-test mode or silence.
Precautions
- Make sure that the alarm is installed in a location that communicates well with the router.
- Do not install the alarm in an outdoor place subject to rain.
