ETEKCITY EM-SF3 Smart Shiatsu Foot Massager User Manual

ETEKCITY EM-SF3 Smart Shiatsu Foot Massager

Package Contents

1 x Foot Massager
1 x AC Power Adapter
1 x Quick Start Guide
1 x Warranty Card

**Specifications

**

Important Safety Information

To reduce the risk of burns, fire, electric shock, or other injury, follow all instructions and safety guidelines. Read all
instructions before using.

• DANGER:
  • Always unplug this massager from the electrical outlet immediately after using and before cleaning.
  • Examine your massager’s fa bric covering for any sign of damage before using. If there are any blisters, tears, or cracks, do not use your massager.
  • Never use pins or other metallic fasteners with this massager.
  • Keep dry. Do not use the massager if it is wet.
• WARNING:
  • Do not leave your massager unattended when plugged in. Unplug when not in use, and before putting on or taking off parts.
  • Do not operate under a blanket or pillow.
  • Overheating can occur causing fire, electric shock, or other injury.
  • Close supervision is necessary when your massager is used by or near children, invalids, or persons with disabilities.
  • Only use this appliance as directed in this manual.
  • Do not use attachments not recommended by Etekcity.
  • Do not use the massager if it has been dropped, if it is not working properly, or if any of its parts (including the cord or plug) are damaged.
  • Contact Customer Support (see page 24).
  • Do not use the massager if it has been dropped in water.
  • Turn off and stop using the massager immediately if it makes an unusual noise, emits a strange smell, or if smoke comes from it.
  • Contact Customer Support (see page 24).
  • Do not carry the massager by the cord .
  • Keep the cord and adapter away from heated surfaces.
  • Do not insert any object into any opening unless directed by the manual.
  • Do not use outdoors.
  • Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
  • To disconnect, turn off all controls, then unplug .
  • The massager may get hot enough to cause burns on any control setting.
  • Do not use when sleeping.
  • Do not use on infants, disabled persons, or people who are sleeping or unconscious.
  • Do not use on sensitive skin or if you have poor blood circulation.
  • Check the skin in contact with the heated area of the massager frequently to reduce the risk of blistering.
  • Do not use this massager on swollen or inflamed areas.
  • If you have any injury, disease, or reduced feeling in your lower legs or feet, then consult a physician before using.
  • The massager is not intended for medical use or as a substitute for medical attention.
  • Do not crush the massager.
  • Do not use this massager for more than 30 minutes at a time.
  • Never stand with feet in the massager.
  • Only use while seated.
  • Do not stand on the massager or place heavy objects on it.
  • Do not remove the housing cover .
  • Do not try to repair the massager. Contact
  • Customer Support (see page 24) if the massager is malfunctioning.
  • Positioning your massager incorrectly or applying excess pressure may result in pain or injury.
  • Not for commercial use.
  • Household use only.

SAVE THESE INSTRUCTIONS

Function Diagram

• A. Timer Display
• B. Bluetooth® Indicator
• C. Timer Button
• D. Heat Button
• E. Intensity Button
• F. Mode Button
• G. Power Button
• H. Massager Housing
• I. Detachable Foot Sleeves
• J. AC Power Adapter Input
• K. AC Power Adapter

Using the Massager
Before using, connect the AC power adapter to the massager [Figure 1.1] and plug in to an outlet.

• A. Tap to start the massager. Tap again at any time to stop the massager.

• B. Tap to adjust the massage time between 15, 20, and 25 minutes.
  Note: The timer will restart each time you tap

• C. Tap to turn the heating function on or off.

• D. Tap to adjust the massage air pressure level between 1 (Low), 2 (Medium), and 3 (High).

• E. Tap to change the massage mode between Mode 1, 2, and 3.

  • Mode 1: The massage rollers move slower for a gentler massage.
  • Mode 2: The massage rollers move faster for a more powerful massage.
  • Mode 3: The massage rollers will start and pause regularly for a massage with more air pressure.
    Note: The def a ult settings when the massager is turned on are a 15 minute timer with heat off and low intensity in massage mode 1.
    CAUTION: Never stand with feet in the massager. Only use while seated.

Using the Massager
Tips

• Do not use this massager for more than 30 minutes at a time.

• If the massager is used for too long, overheat protection will activate and the massager will shut down. Allow the massager to cool for
  about 40 minutes before using again.

• Avoid using with only 1 foot unless necessary, as this may shorten the life of the massager.

• If you feel uncomfortable or feel pain while using the massager, stop using it immediately. Consult a physician if necessary.

VeSync App Setup
Note: Due to continuing updates and improvements, the VeSync app may appear slightly different.  In case of any differences, follow the in-app instructions.

• 1. To download the VeSync app, scan the QR code, or search “VeSync” in the Apple App Store® or Google Play™ Store.
  Note: For Android users, you must select Allow to use VeSync.

Open the sync app. If you already have an account, tap login. To create a

new account, tap Sign Up.

Configuration

• Set up your massager with the VeSync app.

  •  Press to turn on the massager. The massager will automatically go into Bluetooth pairing mode, and will blink.
  •  Tap

• Tap Massager and select your massager.
  Note: Your phone’s Bluetooth must be turned on to connect to the massager. If prompted, turn on Bluetooth in your phone settings.

• Tap Connect. When the app discovers your massager, tap on its name.
  Note: Your phone’s GPS / Location service must be turned on to discover the massager. If prompted, turn on Location in your phone settings.

• Give your massager a unique name, or use the default name.

  • Note:
  • Tap to change the massager icon.

You can change the name and icon at any time by going to the massager screen and tapping

App Operation

Note: The massager must be plugged in before using with the app.

• A. Tap to turn the massager on or off.

App Operation (cont.)

• B. Scroll on the central display to select a timer. Choose between 15, 20, and 25 minutes.
• C. Tap to change the massage mode between Mode 1, 2, and 3.
• D. Tap to adjust the massage pressure level between 1 (Low), 2 (Medium), and 3 (High).

Tap to turn on or off the heating function.

Favorite Settings

• A Favorite is a shortcut to easily apply saved settings to your massager.
• To add a Favorite, tap Favorites and follow the in-app instructions.
• You can also tap in the upper right corner to save your current settings as a Favorite.
• Tap Favorites to view a list of all your saved Favorite settings. Tap Apply to immediately use a Favorite setting. Tap on a Favorite to edit it. To remove a Favorite, swipe left and tap . Tap to

Note: You can change your settings at any time, even while using a Favorite.

Massager Settings

Tap to see Device Settings. In Device Settings, you can change the massager’s name and icon, upgrade firmware, and delete the massager from your VeSync app.

Note:

• Regularly upgrade your firmware to make sure your massager works correctly.
• You can also delete your massager from the My Home screen in the VeSync app.
  • iOS™: Swipe left on the massager’s name to delete.
  • Android™: Press and hold for 2 seconds on the massager’s name to delete.

Maintenance

• Launder the removable foot sleeves when necessary. Wash on delicate cycle in cool or warm water (lower than 122° F / 50°C).
  Note: Laundering may slightly discolor the cloth cover. Wash with dark colors.

• Use a soft cotton cloth and non-abrasive detergent to clean the massager. Never immerse in water.

• Keep away from heat sources and direct sunlight.

• Do not store in extreme temperatures. Storage temperature should be 14°-122° F / -10°-50° C.

Troubleshooting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>