MODSTER BAT Battery Approved Treasure Box User Manual

MODSTER BAT Battery Approved Treasure Box User Manual

1. Introduction

Dear Customer,
thank you for chosing a product from MODSTER.
All products are carefully checked for completeness and function before delivery. Due to continuous development and improvement of our products, we reserve the right to make technical changes as well as changes in equipment and design without notice. Claims from minor deviations against data and illustrations of these instructions regarding the product you are presented with, can not be claimed. The responsible handling of the product is for your own safety and the safety of the uninvolved. Read the safety instructions in this manual carefully!

Warranty includes manufacturing and material defects and errors during normal use only.
We will not accept any liability for consequential damages!

Warranty excludes:

• Damage caused by failure to observe the safety instructions or the operating instructions.
• Force majeure, collisions, incorrect handling
• Extraordinary stress or foreign influence
• Unauthorized alterations or repairs carried out by unauthorized people
• Wear parts and normal usage
• Optical impairments
• Transport, shipping or insurance costs
• Costs for the proper disposal of the product as well as setup and restoration work done by the service.

2. Contents

• B.A.T Safe Box
• Charger Mount
• Velcro fastener

3. Before Starting – Safety Notes

Always use the product responsibly.

As a distributor of the product, we have no direct influence on the correct handling and the correct operation of the product. The following safety instructions are designed to protect you and your environment from damage that may result from improper use. But also the product
itself and your batteries should be protected by the appropriate notes against damage. Please read this chapter carefully before using the product!

Use this product only with batteries specifically designated for model building.
Take care not to endanger anyone, take particular care with children!

We do not assume liability for non-observance of the safety instructions.
In such cases, the warranty will be void.
We will not accept any liability for consequential damages!

• The product is suitable for children under 14 years only under the supervision of an adult.
• Dispose of the packaging material, as this could become a hazard for children.
• Check with your insurance company whether the operation of the B.A.T Safe falls under the insurance cover.
• Never charge battery packs unattended.
• Please observe the separate operating instructions for possible accessories.
• We will not accept any liablity for consequential damages.
• Check the B.A.T Safe and the battery packs you want to charge on their functionality and visible damages, like broken closures or cables.

Charging lithium batteries is inherent dangerous and we can‘t guarantee that the usage of the B.A.T Safe prevents damage to properties or injuries. The B.A.T Safe was developed to reduce the probability of damage to properties which can be caused by a fire from charging a battery
pack by a huge amount. Keep the B.A.T Safe away from flammable objects, smokes or liquids.

4. Design and Function

The B.A.T Safe is a double-walled, steel-insulated box that holds the heat of a battery fire. In the case of a battery fire, smoke and hot exhaust gases are discharged through the top of the box. The top of the box is designed to filter the flame and diffuse the hot exhaust gases to prevent flame or soot radiation from escaping.

In case of fire, a large amount of hot white smoke is released through the ventilation holes. Make sure that there is free space (1 meter) above the lid. The products of the combustion can be harmful, so windows and / or doors should be open so that the smoke can escape the area.
People with lung disease or owners of susceptible pets (e.g. birds) should be extremely careful.

**Carbon monoxide poisoning can be fatal**
Carbon monoxide detectors for residential use are purchasable. The dangers of carbon monoxide poisoning after incomplete combustion of fuels in a closed space must be considered. A lipo battery firing generates dangerous amounts of carbon monoxide in a confined space.

Maximum battery size
Do not charge or store more than two 5000 mAh batteries at the same time. Please also observe the safety instructions of the batteries you use!

Use of B.A.T Safe

• Follow the battery and charger instructions when using the B.A.T Safe.
• Make sure the B.A.T Safe is on a flame retardant surface.
• Make sure that the ventilation holes in the lid are 1 meter away from flammable objects.
• Make sure the lid is closed and locked when charging or storing the batteries.
• Make sure that the cable duct is installed and fully seated.
• Do not use the B.A.T Safe if you detect a damage or a defect.
• The B.A.T Safe is designed to reduce the risk of damage in case of fire.

How to proceed in case of fire:
The B.A.T Safe will emit white, smelling smoke during a fire. These exhaust gases are extremely hot. Therefore stay away until the battery is completely burnt. A significant reduction in smoke from the vents indicates that the battery fire is dying down.

The products of combustion can be particularly harmful when confined in a small space. Immediately open doors and windows to disperse the exhaust gases. Touching the surfaces of the B.A.T Safe during a fire can cause skin burns.

Let the B.A.T Safe cool down, then go outside to remove damaged batteries. Do not open the B.A.T Safe during a battery fire.

Preparation for use

• Take the B.A.T Safe out of the box and remove all protective packaging materials.
• Remove parts from the inside of the B.A.T Safe.
• When installing the charger bracket, place the tabs in the ventilation holes and use the velcro provided to secure the bracket to the back of the B.A.T Safe cover.
• When placing your charger on the charging stand, use the supplied velcro fastener. Make sure that the charger does not affect the exhaust ports.
• Use the pull handles for the easy installation of the cable path seal. Place the charging wires between each half of the cable path, and then pull the cable. After that put the cable gland through the opening in the box lid. Make sure there are no gaps and that the upper and lower lip of the cable path is in place.
• Connect the charger and compensating leads as usual. Make sure that no cables are coming out of the battery outlet openings.
• Place the B.A.T Safe on a fireproof surface and leave at least 1 meter of clearance above the lid.
• Charge the batteries as recommended in the charger instructions.

It should be noted: battery margins are extremely rare. Do not let this lead to carelessness during the store. Use the B.A.T Safe as intended during each charging process!

6. Warranty

The statutory warranty covers manufacturing and material defects in normal use. We do not accept liability for consequential damages!

The warranty does not include:

• Damage caused by failure to observe the safety instructions or the operating instructions
• Force majeure, battles, incorrect handling
• Overuse or foreign influence
• Unauthorized changes
• Damage caused by loss of control
• Influence of current, high voltage or lightning strike
• Normal wear and tear
• Visual defects
• Transport, shipping or insurance costs

This instruction manual corresponds to the technical state at the time of printing. Subject to change without prior notice.

MSGONLINE GMBH

WIRTSCHAFTSPARKS

A-8530DEUTSCHLANDSBERG

FIRMENBUCH GRAZ FN315230Z .UID-NR. ATU 6436 1513

EVA-PARTNERNUMMER: 152216 ARA LIZENZNUMMER: 17749 – GRS NUMMER: 110072576 INTERSEROH HERSTELLER ID (EAR): 152204

WEE REG.-NR. DE 44576630

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>