MASiMO Hook and Loop Sensor Anchor Accessory Instruction Manual
- June 9, 2024
- MASiMO
Table of Contents
MASiMO Hook and Loop Sensor Anchor Accessory
Sensor Anchor Accessory
DIRECTIONS FOR USE
- Single-patient use only
- Not made with natural rubber latex
- Non-sterile
INSTRUCTIONS
-
Identify the anchor tab and anchor pad squares.
-
To attach the anchor tab to the sensor cable, remove the release liner from the anchor tab and wrap it around the sensor cable.
note: Do not apply adhesive to the hook and loop portion of the tab. -
Remove the anchor pad from the release liner and secure the pad to the patient’s skin.
note: Do not secure to the patient’s clothing.
-
Attach the anchor tab to the anchor pad to secure the sensor cable to the patient. Refer to Fig.1 for an example with an ear sensor application.
Manufacturer: Masimo Corporation 52 Discovery Irvine, CA 92618 USA www.masimo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>