savio BT-050 5.0 USB Dongle Adapter User Manual
- June 6, 2024
- Savio
Table of Contents
Bluetooth 5.0 dongle adapter
model: BT-050
User manual
Thank you for choosing our product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, on social media, or on the website
of the store where you made the purchase. If you want to show off our device
on Savio.net.pl FanPage on Facebook, we will be very pleased.
If the ere is something that we could improve on our products, please write to
us at support@savio.net.pl Thanks to your
feedback, we will be able to better adapt the product to your expectations.
Before starting the use of the purchased device it is recommended to read the whole manual.
Installation:
To avoid software conflict, please uninstall any previously installed third-
party Bluetooth drivers or management software on your computer before
installing the BT-050 adapter software.
The Default Bluetooth drivers provided by Microsoft Windows have limited
functionality, it will be installed automatically after you insert the USB
adapter, you still need to install the full driver software on CD if you want
to access the full functionality (more Bluetooth profiles supported).
System Requirement:
- Supported operating system: Windows 7/8/10 (32/64 bit),
- Linux (Beta Driver Only)
- CPU Speed: 500MHz or higher
- Hard drive space: 500MB
- RAM: 1GB or more
Installing drivers from the CD:
Connect Bluetooth adapter to the computer, open the CD in Windows Explorer and run Setup.exe under Windows folder.
Auto installation program:
Click Next to start installation.
Click Install if there is a Warning window, check always
Trust software from Realtek Semiconductor Corp, you need to restart the
computer after installation is finished.
You will find Realtek Bluetooth 5.0 Adapter under Device Manager after driver software is installed successluffy.
Pair your devices:
The Bluetooth icon should appear in the system tray after the driver is installed. Right-click the icon and choose to Add a Bluetooth Device from the context menu.
If you’re using Windows 8 or 10, you’ll see a screen like below. Just click the Pair button for the device you want to connect.
If you’re using Windows 7 you’ll see a similar screen, select the device you want to connect and then click Next.
Pairing a Device that doesn’t show up automatically:
If for some reason your device doesn’t appear below, click the Add Bluetooth or Other Device button located at the top of the Setting window.
This symbol means that in accordance with European Union directive 2012/12EU, electrical and electronic equipment should not be disposed of with other household waste. The equipment should be sent to a local collection point for this type of waste or to a recycling center. Please contact your local authority for information on available disposal methods. Importer disposal of waste is threatened by the penalties provided for by law in force in the given area. Proper disposal of equipment will help to avoid the negative effects that threaten the environment and human health, in the event of improper utilization.
Information for customers and contractors and communication regarding
complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27
April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp.
z o.o., with its registered seat at ul. Morga 81; 35-323 Rzeszów becomes the
Administrator of your personal data. The Specialist for General Data
Protection (SODO) can be contacted in writing to SODO, Elmak Sp. z o.o., ul.
Morga 81; 35-323 Rzeszów, via e-mail address:
sodo@elmak.pl, and by phone at +48 (17) 854 98 14.
Your personal data will be processed in order to perform the contract, in
accordance with Article 6(1)(b) of the aforementioned regulation, to the
extent resulting from tax laws and financial regulations. Recipients of your
personal data include entities authorized by legal regulations to obtain
personal data as well as processing entities providing services to Elmak Sp. z
o.o. Your personal data will be stored on the basis of the Administrator’s
legitimate interest. You have the right to access your data, and the right to
rectify, delete or limit the processing of your data. You have the right to
lodge a complaint to the supervisory body if you believe that the processing
violates the GDPR. The provision of personal data is voluntary, however, a
failure to provide such data may result in a refusal to conclude or in
termination of a contract. Your personal data will not be subjected to
automated decision-making, including the profiling referred to in Article 22
section 1 and 4 of the GDPR of April 27, 2016.
Information of the utilization of electrical and electronic equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>