BLITZWOLF USB RGB TV Strip Light Kit BW-LT32 User Manual
- June 6, 2024
- Blitzwolf
Table of Contents
User Manual
BW-LT32
At A Glance
Package Includes:
0.5M Light Strip X2, 1M Light Strip X1, Strip Controller X1, Color Sensor X1, Remote Control X1, User Manual X1
Specification
Model: BW–LT32
Input: OC:5V/1A
Interface: USE
LED Color: RGB
LED Quantities: 60Pcs SMD5050 (2m)
Waterproof: Strip Light IP65; Controller: IP20
Color Sensing Mode: Supported
Working Temperature: –20′-55
Lifespan: 500OOH
Certificate: CE/ROHS/FCC
Operation
Strip Controller Introduction
-
Tap the button to turn on the light.
Mode 1. Automatically capture and display color on screen,
Mode 2: Step change model(light green,
ice blue, pink, white, green, red, blue)
Mode 3: Slow step-change mode (red, blue, light green, ice blue, pink, white, green
Mode 4: Ice Blue
Mode 5: Pink
Mode 6: Purple
Mode 7. Warm Yellow -
Long press “ ” 2–3s to turn off the light.
-
Press to adjust the current color brightness.
RF Controller Introduction
| 1: ON/OFF | 5&7 Static Color Adjustment |
|---|---|
| 2&10: Dynamic Speed Adjustment | 8&11: Dynamic Mode Adjustment |
| 389: Brightness Adjustment | 6: Single Color Selection |
4: Color Sensing
Attention
- Change the stacking direction of the light strip through the connector to avoid bending.
- The light strip connector is firmly and correctly connected to the light strip, and the ±” and_” directions are consistent.
- Connect the color sensor jack to the controller to achieve screen color synchronization
- Install and fx the color sensor vertically on the left or right side of the screen.
- The US8 port of some brand TVs has output limitations, so you can use an adapter to power the light bar.
Company: Lotus NL B.V.
Address: Koningin Julianaplein 10, le Verd, 2595AA, The Hague,
The Netherlands.
E-mail: peter@lotusnl.com
Tel: +31644168999
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>