BliTZWOlF BW-FL1 Smart Fingerprint Padlock User Manual

User Manual
BW-FL1

At A Glance

1. Lock Beam
2. Indicator Light| 3. Fingerprint Sensor
4. USB Port
---|---

Specification

Model: BW-FL
Input: DC5V
Port Type: Micro U9SB
Number Of Fingerprints: 20 sets
Response Speed: 0.2s
Li-Battery Capacity: DC3.7V/110mAh
Charging Time: 40 Minutes
Working Time: 1 Year
Working Temperature: –10-45C

1. Please fully charge it when using it for the frst time

2. Support 20 sets of fingerprint entry: No.1–2 fingerprints are administrators; No. 3.20 fingerprints are ordinary users.
   If the capacity is exceeded, it will no longer be stored

3. Once the lock is restored to the factory mode, all fingerprints will be deleted, and any fingerprint can be unlocked in this mode

Operation

Register The first Administrator Fingerprint

1. Unlock the padlock and press the fingerprint sensor 8s until the blue light is always On.
2. Press it with the same fingerprint to start registering until the green light flashes, then press it five times to complete the collection. Register failed when the red light flashed,  register successfully when the green light flashed.
3. After five times of successful registration of green light flashed, which means the administrator fingerprint is registered successfully.
   Note: Please avoid accidental registration when the first press the fingerprint registration.

Register The 2nd To 20th Fingerprints

1. Unlock the padlock, press and hold the administrator’s fingerprint for 5s until the blue light is on
2. When the new user presses the fingerprint for the first time, the green light flashes, press the same finger 5 times and the entry is completed. the red light is flashing, the  registration fails, and if the green light is flashing, If the registration is successful
   Note: Register a new fingerprint requires an administrator fingerprint authorization

Delete AII Fingerprints & Restore Device

1. Unlock the padlock, press the administrator fingerprint 8s until the red light is always on
2. Press the administrator fingerprint and the green light is on, indicating that all fingerprints have been successfully deleted and restored to the factory default settings.

Note: Deleting fingerprints requires an administrator fingerprint authorization

Company: Lotus NL. B.V
Address: Koningin Julianaplein 10, 1e Verd, 2595AA,
The Hague, Netherlands
E-mail: peter@lotusnl.corm
Tel: +31644188999

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>