AXESS PABT6037 Double 15-Inch Woofer 3-Inch Trolley Speaker User Manual

PABT6037

DOUBLE 15″ WOOFER

3″ Tweeter Trolley Speaker

For correctly operating, please read this manual carefully before using. Any content revise of the manual won’t declare again, and we are not responsible for consequence cause by fault or oversight of this manual.

TO CUSTOMERS

Thank you for your support and trust on purchasing the products of our company. To fully exert the function of the product, we suggest you to read the operating instruction carefully before using it, for the convenience of grasping the connection method and using points. Please take care of the operating instruction after reading it for the purpose of further reference.

SPECIFICATIONS

• Double 15″ Woofer + 3″ Tweeter
• Bluetooth PA Speaker
• JBL Brilliant Lights
• USB/TF Card Inputs
• FM Radio Function
• Microphone Input
• 10,000 Watt PMPO
• 12V/7.5 Lithium Battery
• with Equalizer
• Remote Control
• Two Wireless Microphone

REMOTE CONTROL

1. Power Switch: Press this switch turn on and off the speaker
2. Mode Selector: Press this button tot switch between USB, TF, FM and bluetooth inputs
3. Repeat Track: tap this button to single tuen repeat
4. EQ mode switching
5. Previous FM Station (CH-): When using the speaker in FM mode, press this button to got to the previous stored FM station
6. Next FM Station (CH+); When using the speaker in FM mode press this button to go to the next stored FM station
7. Previous Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
8. Next Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
9. Pause & FM scan: Press this button to pause the signal from the USB drive TF Card or Bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations.
10. VOLUME –
11. VOLUME +
12. Number buttons (0-9)

CONTROL PANELS

1. USB Flash Drive Input: Insert your USB flash drive into this slot. The unit will only read mp3., wav, wma files from the USB flash drive. The maximum storage size of the USB flash drive cannot exceed 32GB. Do not attempt to connect a computer.

2. TF Input: Insert your TF card into this slot. The unit will only read mp3, wav, wma files from the TF card flash drive cannot exceed 32GB

3. Main Volume KNob: use this knob to adjust the volume of USB/TF/BTL/FM music.

4. AUX Input: Connect your smartphone, mp3 player, laptop or other audio device to this input

5. Treble Knob: Use this knob to adjust the treble levels.

6. Bass Knob: Use this knob to adjust the bass levels.

7. Microphone Volume Knob: Use this knob to adjust the microphone volume levels.

8. Microphone Echo Knob: Use this knob to adjust the microphone echo levels.

9. Guitar Volume Knob: Use this knob to adjust the volume of the guitar.

10. External DC12V Input

11. Microphone Priority: When the microphone priority is activated speaking into the microphone will automatically lower the other audio signal 20dB.

12. Next Track/ Next FM Station (CH+): Bluetooth mode, press this button to go to the next track. When using the speaker in FM mode, press this button to go to the next stored FM station.

13. Play/Pause & FM Scan: Press this button to pause the signal from the USB flash drive TF card or Bluetooth Inputs. When using the speaker in FM Mode, press this button to auto scan for all available stations. Each station will be stored. Press the CH+ and CH- to choose a station.

14. Previous Track/ Previous FM Station (CH-): When using the speaker in USB/TF card & Bluetooth mode, press this button to go to the previous track. When using the speaker in FM mode, press this button to go to the previous stored FM station.

15. Insert the microphone and insert a USB disk or TF card. Press and hold the REC button on the rear panel for 3-5 seconds to enter the recording. To stop recording, press and hold the REC button for 3-5 seconds. The recording file is saved in the USB flash drive or TF card. Recorded files can be deleted on your computer.

16. Mode Selector: Press this button to switch between USB/TF/FM and bluetooth inputs TWS: press TWS button for 3 seconds for bluetooth pairing mode

17. USB/TF Display screen: the elapsed time and format will appear on this display screen for the USB/TF card inputs.

18. (EQ) Equalizer; optimize music up and down adjustment, high-medium-low frequency

19. FM Antenna: for best results fully extend the antenna

20. RCA Input: connect to CD/DVD, mp3 player, laptop or other audio source devices

21. Insert the guitar into the front panel guitar jack adn adjust the guitar volume to the optimal level

22. Insert Microphone to front panel MIC jac, adjust MIC VOL and Echo to best level

23. LED Lights Power Button: Press this button to turn on and off the front LEDs

24. Power Switch: Press this switch turn on and off the speakers. Before powering on the speaker
    make sure the volume levels are turned down to prevent damage to amplifier or speakers

25. Charging Port: Plug the power cord into the AC110-240V input port to charge the battery

GENERAL OPERATION OF WIRELESS MICROPHONE

• Insert batteries into the wireless microphone
• Turn power switch on microphone to “ON”
• Please extend the antenna on the speaker and make it vertically upward for better reception.
• Adjust the microphone volume knob on the speaker to desired volume
• Ensure wireless microphones are operated within a 30m range of the speaker
• Keep 5-15cm distances between microphone and lips for best performance
• LED indicator on microphone will turn red when power level is low, please replace with new battery
• Only use the included wireless microphone in the speaker package.

GENERAL OPERATION OF WIRED MICROPHONE

• Insert the wired microphone to “MIC IN”
• Turn power switch on microphone to “ON”.
• Adjust the microphone volume knob on the speaker to desire volume.

GENERAL OPERATION OF BLUETOOTH MODE

• Turn the speaker to ON and press the mode button to enter “Bluetooth” mode
• Turn ON your smartphone / tablet device’s Bluetooth connectivity and search for device named “PABT6037”
• Click on device to connect “PABT6037”
• When Bluetooth connection is established, the speaker will announce “Bluetooth Mode” is successfully connected
• Play music on your smartphone / tablet device and audio will be streamed to the speaker
• Ensure your smartphone / tablet device is compatible with Bluetooth A2DP audio profile
• You may use the MP3 player panel button to navigate the Bluetooth music
  Key: Press this button to play/pause the music.
  VOL- key: Press for previous music.
  VOL+ key: Press for next music.

GENERAL OPERATION OF FM RADIO FUNCTION

• Turn the speaker to ON and press the mode button to enter “FM” mode
• When the speaker will announce “Radio mode” to indicate successful connection.
  Key: Press this button to “auto scan” the stations.
  VOL- key: Press for previous station.
  VOL+ key: Press for next station.

ATTENTION

• For first time use fully charge the device until the light indicator on the control panel turns off.
• This can take up to approximately 8 hours to fully charge. If you don’t, the device will not function at full capacity.

Prompt
When people sleep, they need a quiet environment.
Please turn off music or turn off the power while sleeping.

This symbol indicates to user that the machine with risk of electric shock

This symbol indicates to user that the machine with important operation and maintenance instruction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>