QFX PBX-115 Portable Battery Speaker User Manual

: June 6, 2024
: QFX

Table of Contents

Specifications:
BASIC OPERATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PORTABLE BATTERY SPEAKER
User Manual
PBX-115

Specifications:

Power: 20W
Frequency Response for the main speaker: 45Hz-20KHz
Power Supply: DC 9V

MIC VOLUME/MENU: Mic volume adjust. Push knob enter menu to adjust microphone bass (1b) & treble(1t)
ECHO: Microphone karaoke echo adjust
DELAY: Microphone karaoke delay adjust
LED display
TREBLE: Music treble adjust
BASS: Music bass adjust
VOLUME/EQ PUSH: Music volume adjust. Push knob enter to adjust music EQ
MIC1: Microphone input
MIC2: Microphone input
TF card input
USB: USB Player/Power Bank 5V 1A output
POWER/INPUT short time press button power on/input change long time press button power off
LIGHT/MODE (Light flash mode selection & Light witch on/off button)
PRIORITY Microphone priority on/off button
VOCAL Voice Cancel
Previous song
Play/Pause/FM: Click change Play and pause, Press 3 seconds enter FM scan
Next song
LINE input
DC 9V input
LED CHARGE STATUS: RED = Charging GREEN = Fully charged

BASIC OPERATION

POWER/INPUT: long press (for above 2 seconds) to turn on the machine; during the working state, short press to select mode: BT/LINE/FM (circulating); during working status, long press (for above 2 seconds) to turn off the machine.
PLAY/PAUSE: during playing status, short press to pause/mute; during FM mode, long press to automatically scan radio station.
MIC VOLUME-/+ &MENU PUSH: adjust the volume; PUSH knob enter menu.
PREVIOUS/NEXT: during playing status, press to get back to a previous or next song.
MIC PRIORITY: insert microphone, then press the MIC PRIORITY button, when you speak to the microphone, the audio signal turns weak; when you do not speak to the microphone, the audio signal turns normal.
VOLUME-/+ &EQ PUSH: adjust volume: PUSH knob enter menu: BA/tb/EQ mode/ JAZZ/ROCK etc (circulating).
USB: USB Player/Power Bank 5V 1A output.

FM Operation
A. Lightly press the Power/Input button to switch to FM mode, long-press the PLAY/PAUSE button to automatically scan the radio station, by pressing PREVIOUS or NEXT you can select a previous or next song.
B. When scanning radio programs, adjust the antenna to obtain the best reception.
Bluetooth:
Press the POWER/INPUT button on the panel control to select Bluetooth mode. Simultaneously open the Bluetooth setting on your phone, tablet or any other Bluetooth-enabled audio device and select “PBX-115”. The unit and device will then connect via Bluetooth to control the device via your phone, tablet etc please download the App “Speaker Pro”. Once the unit and device are connected via Bluetooth, open the “Speaker Pro” App on your phone. You can control Music, Light, USB Card, Bluetooth and Equalizer etc.

To control the device via your phone, please find and install the app ” Speaker Pro “. Open the App “Speaker Pro” on your phone, there are 7 function icons on the main page :

Bluetooth Music play
USB card play
Light control color, brightness, and light flash mode
FM Radio
Control Bluetooth connect
Line In input – mute
Equalizer, volume adjustment for music, Microphone, and guitar input.
TF CARD PLAYER
Bluetooth Music play
Press to enter into Bluetooth Music play page, Press “Pick songs to play” to Pick Song page to choose the song you want to play, press “Done” to return to Bluetooth Music play page, also you can operate pause, play, backward, forward& volume adjustment, repeat, random play. Press “Back” to return to the main page.
USB card play
When inserting a USB into the speaker, press to enter the USB Card play page. To choose a song and play music on the USB card, press “Play” to enter into the play control page, where you can operate pause, play, backward, forward &volume adjustment. Press “List” to return to the USB list page, press “Back” to return to the main page.
Light control colors, brightness, and color change mode
Press to enter into Light Control page, you can select any color to show the light color on the speaker, as well as adjust the brightness of the light. To go back to the main page, press ” ” in the left corner. Press “Profiles” to enter into the Light Effect mode page, you can choose from a total of 12 pre- set light effect modes. To return to the Light Control page, press “Light” in the left corner.
FM Radio
Press to enter into FM radio mode, press SCAN to enter into radio program automatic scan. Press for radio program manual scan, Top and bottom trimming, Turn the TUNER button radio station can be adjusted. Slide around to adjust radio frequency between 87.5MHz~108.0MHz.
Bluetooth connection
Press to enter into Bluetooth Control connection page, then click “Speaker Pro BLE” to connect to the speaker.
Line In input – mute
Press to enter into Line IN input page, press to mute music, press insert a line continue to play. Press “Back” to the main page.
Equalizer, volume adjustment for Microphone and Music
Press to enter into Sound Set page to adjust the volume for Music and Microphone.
Press the Microphone button, and then turn Volume or Bass or Treble button to adjust the volume; press the Music button, and then turn ECHO or Microphone Volume or Delay to adjust the volume. There are 4 pre-set EQ modes: Pop, Classical, Jazz and Rock. You can also press G-Eq to access the graphic equalizer to set up your preferred equalize specification.
MIC DSP selection
Click SPEAKER PRO on the top left corner to exit from APPle MUSIC PLAYER.

During Sound Field Mode: DSP MODE has 5 choices: KTV, HALL, CAVE, CONCERT, STADIUM; MIX VOLUME has 2 choices: BYPASS, EFFECT, swipe left and right to adjust the volume; press ECHO to adjust the volume of ATTENUATION
or DELAY mode; press REVBER to adjust the volume of 5 choices: DRY WET WIDTH ROOM DAMPING; press VOICES CHANGE to adjust the volume of PITCH or FORMANT mode; press PITCH SHIFTER to adjust the volume of KEY mode; HOWLING CONTROL has 4 choices: FREQUENCY SHIFTER HOWLING PRECISE MASSIVE.