AXESS 6.5″ Super Bass Bluetooth Speaker PABT6010 Instruction Manual

June 6, 2024
Axess

AXESS 6.5″ Super Bass Bluetooth Speaker PABT6010

AXESS 6.5 Super Bass Bluetooth Speaker PABT6010

For correctly operating, please read this manual carefully before using. Any content revise of the manual won’t declare again, and we are not responsible for consequence cause by fault or oversight of this manual.

Prompt
When people sleep, they need a quiet environment. Please turn off music or turn off the power while sleeping

This symbol indicates to user that the machine with risk of electric shock

This symbol indicates to user that the machine • with important operation and maintenance  instruction

NOTE:
When speaker is not in use please turn off the device to conserve battery life. Make sure to turn down the volume when you turn off the device so you can maintain the speakers’ (sub)woofer in good condition. This way you are less like to burn out or damage the device.

Axess Products Corporation
6649 Valjean Ave. Van Nuys, 91406
Tel. 818-785-4000 Fax. 818-785-5081 info@axessusa.com
Questions? Comments? Contact us at support@axessusa.com
© 2018 Axess Products Corporation. All rights reserved.

TO CUSTOMERS

Thank you for your support and trust on purchasing the products of our company. To fully exert the function of the product, we suggest you to read the operating instruction carefully before using it, for the convenience of grasping the connection method and using points. Please take care of the operating instruction after reading it for the purpose of further reference.

SPECIFICATIONS

  • 6.5″ speaker
  • 10 M Bluetooth range
  • Brilliant LED lights
  • True Wireless Speaker (TWS Link+)
  • TF card slot, AUX input, USB input
  • Microphone input
  • FM radio function
  • 70W (PMPO) Output power
  • 1500mAh battery capacity
  • DC SV Charging port
  • Frequency response 45hz-18khz

PANEL FUNCTIONS

PANEL FUNCTIONS

Mode : Short press to switch among Bluetooth, TF card, USB, Line-in, FM
Long press to turn ON/OFF speaker LED light
Plays the previous track when on Bluetooth, TF card and USB mode
Short press to play or pause music
Long press to start radio station scanning when on FM radio mode
Plays the next track on Bluetooth, TF card and USB mode
Plays next radio station when speaker is on FM mode
DC SV: Charging plug in for built-in rechargeable battery
AUX: auxiliary input can connect to PC, MP3, mobile phones or CD players OFF/ON : Speaker master power switch
USB Port: Supports USB drive and can play MP3 and WAVformat music
TF card port: SupportsTF card and can play MP3 and WAVformat music
MIC: Input for wired microphone

GENERAL OPERATION OF BLUETOOTH MODE

1. Power on the speaker
2. Press the MODE button to enter into Bluetooth mode
3. With your mobile device on Bluetooth mode, search for “PABT601 O”, when the speaker appears pair the devices
4. After the device has been paired successfully for the first time it will take 10 seconds to make the connection. The next time, the connection will be automatic. The speaker can only make one connection at a time.

OPERATING AUX MODE

• Plug one end of the 3.Smm audio cable into the speaker’s AUX jack, and the other end to your mobile device (cellphone, laptop, tablet, etc)
• Control your music from the play/pause or forward/backward buttons on the speaker panel or directly from the mobile device.

LED FUNCTION

• Press and hold the “MODE” button to turn on or off the LED display lights eteindre les voyants LED

OPERATING TWS FUNCTION

• Begin by using your mobile device to successfully pair one of 2 bluetooth speakers on Bluetooth mode.
• When pairing is successfully, move onto the second speaker. Make sure that speaker #2 is on bluetooth mode as well and double click the “PLAY/PAUSE” button to turn on its TWS mode.
• If both speakers are close to each while pairing, they should quickly connect together and begin to play your music simultaneously.

CHARGING

• Take the USB charging cable and connect it to the DC 5V charging port.
And charge it directly to a wall outlet or a USB port on the computer to charge
• To make sure your speaker is charging, look for the charge indicator located on the right side of the LED screen. It wil I illuminate during charging and stop turning on when the speaker is fully charged.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Axess User Manuals

Related Manuals