dji MAVIC 2 ZOOM RC Drone User Guide
- June 6, 2024
- DJi
Table of Contents
- dji MAVIC 2 ZOOM RC Drone
- Remote Controller
- Download the DJI GO 4 App and Watching Tutorial Videos
- Preparing the Aircraft
- Charging the Batteries
- Preparing the Remote Controller
- Preparing for Takeoff
- Flight
- Fly Safe
- Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
dji MAVIC 2 ZOOM RC Drone
Aircraft
The DJITM MAVICTM 2 Zoom features omnidirectional Vision Systems and Infrared
Sensing Systems*, and comes with a fully stabilized 3-axis gimbal camera with
an equivalent 24-48 mm 2x optical zoom lens capable of shooting 4K videos and
12-megapixel photos that support up to 4x FHD lossless zoom. DJI signature
technologies such as Obstacle Sensing and Intelligent Flight Modes like
HyperLapse, ActiveTrackTM 2.0, QuickShot, Panorama, and Advanced Pilot
Assistance Systems, help you capture complex shots effortlessly. The Mavic 2
Zoom boasts a maximum flight speed of 44.7 mph (72 kph) and a maximum flight
time** of 31 minutes.
1. Gimbal and Camera
2. Forward Vision System
3. Downward Vision System
4. Lateral Vision System
5. Downward Infrared Sensing System
6. Auxiliary Bottom Light
7. microSD Card Slot
8. Front LEDs
9. Motors
10. Propellers
11. Antennas
12. Aircraft Status Indicator
13. Upward Infrared Sensing System
14. Backward Vision System
15. Intelligent Flight Battery
16. Battery Level LEDs
17. Power Button
18. Battery Buckles
19. USB-C Port
20. Link Button/Linking Status Indicator
- The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines, User Manual, and watch the tutorial videos in the DJI GOTM 4 app or on the official DJI website to learn more. http://www.dji.com/mavic-2
** Maximum flight time was tested in an environment with no wind while flying at a consistent 15.5 mph (25 kph). This value is for reference only.
Remote Controller
Built into the remote controller is the DJI’s long-range transmission
technology OCUSYNCTM 2.0, offering a maximum transmission range of 5 mi (8 km)
and displaying video from the aircraft to the DJI GO 4 app on your mobile
device at up to 1080p. An on-board LCD screen gives real-time aircraft data
information and the detachable control sticks make the remote controller
easier to store.
Maximum run time: 2 hours and 15 minutes*
1. LCD Screen
2. Flight Pause Button
3. 5D Button
4. Removable Control Sticks
5. Power Button
6. Antennas
7. RTH Button
8. Control Sticks Storage Slot
9. Reserve Video-Downlink Port (USB)
10. Mobile Device Clamp
11. Flight Mode Switch
12. Gimbal Dial
13. Zoom Adjustment Dial
14. Record Button
15. Focus/Shutter Button
16. Video-Downlink/Power Port (micro USB)
17. C1 Button (Customizable)
18. C2 Button (Customizable)
Download the DJI GO 4 App and Watching Tutorial Videos
Search “DJI GO 4” in the App Store or Google Play or scan the QR code below to download the app on your mobile device.
Watch the tutorial videos at www.dji.com/mavic-2/info#video or in DJI GO 4 by tapping the icon in the top right corner of your screen.
DJI GO 4 is compatible with iOS 10.0.2 (or later) or Android 5.0 (or later).
Preparing the Aircraft
Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff.
Charging the Batteries
Use the provided charger to fully charge the Intelligent Flight Battery before first use.
Remove the remote controller cable before charging.
Checking the Battery Levels and Powering On/Off
Press once to check the battery level. Press, then press and hold to turn on/off.
Press once to check the battery level on the LCD screen.
Press once, then press and hold to turn on/off the remote controller.
Preparing the Remote Controller
Attach your mobile device within the clamps.
- Ensure the control sticks are firmly mounted.
- The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller. When using an iPad or tablet, use the USB port on the remote controller.
- Do not use the Micro USB and the USB ports simultaneously for linking video.
Preparing for Takeoff
Use your DJI account to activate the aircraft. Activation requires an internet connection.
Flight
Before taking off, make sure the Aircraft Status Bar in DJI GO 4 displays “Ready to Go”.
The motors can only be stopped mid-flight when the flight controller detects critical error.
Remote Controller Operation
The default flight control is known as Mode 2. The left stick controls the
aircraft’s altitude and heading, while the right stick controls its forward,
backward, left and right movements.
The gimbal dial controls the camera’s tilt.
Press the Flight Pause button for emergency braking during flight.
In DJI GO 4
- Watch the tutorials in DJI GO 4 or at the official DJI website to learn more.
- Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks.
Fly Safe
Avoid flying over or near obstacles, crowds, high voltage power lines, trees
or bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and base
stations as it may affect the onboard compass.
DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wind speeds exceeding 10 m/s or 22 mph.
Stay away from the rotating propellers and motors.
Learn more at: http://flysafe.dji.com/no-fly
It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.
Specifications
Aircraft
- Weight: 905 g
- Max Speed: 44.7 mph (72 kph) in Sport mode without wind
- Max Service Ceiling Above Sea Level: 19685 ft (6000 m)
- Operating Temperature: 14° to 104° F (-10° to 40° C)
- GNSS: GPS + GLONASS
- Operating Frequency: 2.4-2.4835 GHz; 5.725-5.850 GHz
- Transmitter Power (EIRP):
2.4 GHz FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm
5.8 GHz FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
Gimbal
- Controllable Range Pitch: -90° to +30°
Camera
-
Sensor: 1/2.3″ CMOS; Effective pixels: 12M
-
Lens:
FOV: approx. 83° (24 mm), approx. 48° (48 mm) 35 mm format equivalent: 24-48 mm
Aperture: f/2.8 (24 mm) – f/3.8 (48 mm)
Focus: 0.5 m to ∞ -
ISO Range Video: 100-3200
-
Photo: 100-1600 (auto); 100-3200 (manual)
-
Electronic Shutter Speed: 8-1/8000 s
-
Max Image Size: 4000×3000
-
Still Photography Modes: Single shot
Burst shooting: 3/5/7 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias Interval -
Video Recording Modes:
4K Ultra HD: 3840×2160 24/25/30p
2.7K: 2688×1512 24/25/30/48/50/60p
FHD: 1920×1080 24/25/30/48/50/60/120p -
Video Storage Bitrate: 100 Mbps
-
Photo : JPEG, DNG (RAW)
-
Video: MP4, MOV (MPEG-4 AVC/H.264, HEVC)
-
Supported SD Cards : microSD
Max Capacity: 128 GB (UHS-I Speed Grade 3 rating required)
Charger
- Voltage: 17.6±0.1 V
- Rated Power: 60 W
Intelligent Flight Battery
- Capacity 3850 mAh
- Voltage 17.6 V (max) 15.4 V (typical)
- Battery Type LiPo 4S
- Energy 59.29 Wh
- Net Weight Approx. 297 g
- Charging Temperature Range: 41° to 104° F (5° to 40° C)
- Max Charging Power 80 W
For more information, read the User Manual: http://www.dji.com/mavic-2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>