enbrighten USB Solar Panel User Guide

: June 6, 2024
: enbrighten

Table of Contents

Installation
Included Parts:
Surface Mounting:
Stake Mounting:
Zip-Tie Mounting
Operation
Connecting the Solar Panel:
Troubleshooting
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

USB Solar Panel

READ IT OR WATCH IT

https://byjasco.com/hep-et/20000-99999/49582/manual

Read instructions or watch the easy-to-follow videos.
Scan QR code or visit http://bit.ly/2PC7J8z

Features This solar panel is designed to work with the Enbrighten USB- Powered Café Lights and the EcoScapes USB-Powered Café Lights.

Installation

IMPORTANT: Before installation, please read all warning statements included at the bottom of these instructions.

Included Parts:

Surface Mounting:

Mark the mounting locations of either the short or long-arm base using the screw holes as guides.
Before drilling, check that the marked areas are clear of obstacles such as cables and electrical lines.
If mounting with screws, drill into wood or other composite materials using a 3/32 in. drill bit. Then secure the base in place with screws
If mounting with wall anchors drill into masonry or other composite materials using a 7/32 in. drill bit.
Then insert the wall anchors, and secure the base in place with the screws.
Align solar panel with top of mounting arm and adjust the angle for optimum sunlight exposure. Secure to arm with a wing nut.

Stake Mounting:

Combine stake with the long-arm base.
Carefully, but firmly, place a stake in the ground.
Align solar panel with top of mounting arm and adjust the angle for optimum sunlight exposure.
Secure to arm with a wing nut.

Note: If the stake requires more than a firm push to be inserted into the ground, please loosen soil or remove obstacles to ensure the stake is not damaged.

Zip-Tie Mounting

For mounting to round poles, utilize the rounded top and bottom features of the short-arm base.
Loop zip ties through screw holes and fasten in place as shown below.

Operation

Charging the Solar Panel:

Ensure your solar panel is placed so that its exposure to the sun is optimized. Be aware of objects such as trees or property overhangs that may impede the panel’s ability to generate a charge.
A full charge (up to seven hours) offers six hours of operation while your lights are at maximum brightness.
To adjust the solar panel, loosen the wing nut and position the panel. When the desired position is achieved, tighten the wing nut until secure.

Connecting the Solar Panel:

Once the solar panel has been mounted, remove the USB cover located on the back of the panel, and insert the USB plug from your USB-powered café lights.
Press the POWER button on the back to supply power to the connected USB-powered café lights

Troubleshooting

Problem	Possible Cause	Solution
Short lighting time	Panel is not properly exposed to sunlight	When using

solar power ensure the solar panel is located in an area where it can receive the maximum amount of full. direct sunlight every day. If the solar light does not receive enough sunlight during the daytime the battery will be recharged on the next sunny day and resume normal operation. Keeping the solar panel clean is equally important to ensure the maximum charging performance
Failing battery life| Internal battery is non-serviceable. and the solar panel should be replaced. Contact Jasco Products to get a new solar panel.
Timer setting| Select a longer timer setting using the in-line controller for your USB-powered café lights
No lights or flickering lights| Poor USB connection.| Check the USB plug and socket for dirt or foreign matter. and ensure that the plug is properly inserted
POWER button hasn’t been pressed| Press the button on the back of the solar panel to ensure that power is being supplied to the cafe lights and press the POWER button on the café light’s in-line controller.
The solar panel is over-exposed at night| When the light exposure reaches a certain intensity. the product may not automatically light up. The product needs to be installed in a dark place at night
Insufficient power supply| When using solar power. make sure the product is charged for more than 3 hours under strong sunlight before testing.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT SUBMERGE.
DO NOT USE AROUND AQUARIUMS.
SOLAR PANEL IS A WET LOCATION PRODUCT AND HAS NO SERVICEABLE PARTS.
KEEP SOLAR PANELS AT LEAST 16 FEET FROM POOLS AND SPAS.
AVOID DAMAGE TO SOLAR PANELS. INSPECT THE SOLAR PANEL FOR PHYSICAL DAMAGE OR OTHER DAMAGE CAUSED BY OUTDOOR EXPOSURE TO THE ELEMENTS.
REPLACE THE SOLAR PANEL IS DAMAGED.
DO NOT INSTALL IN LOCATIONS WHERE SOLAR PANELS CAN BE STEPPED ON.
CHILDREN SHOULD NOT PLAY WITH SOLAR PANELS.
ONLY USE SOLAR PANELS WITH USB-POWERED CAFÉ LIGHTS.

WARNING: Read all safety precautions and installation instructions carefully before installing or operating this fixture.

Do not expose the solar panel to fire or intense heat
Do not immerse in water

BATTERY INSTRUCTIONS:

This product contains a rechargeable lithium battery. The battery is nonserviceable, please contact Jasco Products for a replacement solar power unit.

CARE AND MAINTENANCE:

The solar panel is not allowed to dip into water or any other liquid.
The water-resistant function is limited to correct installation or within a certain angle in rain.
To optimize the effectiveness of your solar panel, do the following: Choose a location for your solar panel that gets the most sunlight throughout the year. Wipe the panel every few months to remove dust or debris that might affect the solar energy harvesting efficiency of the panel.

MADE IN CHINA / HECHO EN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 3-year
limited warranty. Visit www.byjasco.com
for warranty details.
Questions? Contact our U.S.-based Consumer Care
at 1-800-654-8483 between 7 AM-8 PM, M-F, Central Time.
49582 Manual V1
01/10/20