AXESS PABT6053 Portable Bluetooth PA System Instruction Manual
- June 6, 2024
- Axess
Table of Contents
AXESS PABT6053 Portable Bluetooth PA System
For correctly operating, please read this manual carefully before using. Any content revise of the manual won’t declare again, and we are not responsible for consequence cause by fault or oversight of this manual.
Product Specification
- Portable PA SYSTEM
- Blutooth
- 2×6.5″ Speakers
- USB Input
- TF Card Input
- FM Radio
- Microphone Input
- Microphone EchoNolume
- Bass/Treble Adjustment
- 7 .4V 1800mAh Rechargeable Battery
- SV 1.5 A Adabpter
- Includes Remote Control
- Includes Wired Microphone
INSTRUCTIONS
- This unit has a rechargeable battery when the battery power is finished, kindly plug the switch to electric socket according to input voltage.
- When the unit is charging please make sure AC/DC switch should be on, once changed please unplug the socket from electricity safely.
- You have to charge the battery for up to 10 – 12 hours for the first use, onward you have to recharge the battery for 8 to 1 O hours.
- Battery works normal up to 5 to 1 O hours according to the volume of the speaker.
PANEL FUNCTIONS
- DC Charging Port
- Main Volume
- Treble
- Bass
- Microphone Volume
- Microphone Echo
- LED Lights Power Button
- USB/TF Display
- FM Antenna
- USB Flash Drive Input
- TF Input
- Next Track
- Play/Pause & FM Scan
- Previous Track
- Repeat Track
- Mode
- Microphone Priority
- AUX Input
- Microphone Input
- Power Switch
BLUETOOTH FUNCTIONS
Step 1 : Press the mode button on front panel to launch the bluetooth
application then you will see the “bluetooth” logo on the screen.
Step 2: Slide the “bluetooth” switch to “ON” with your other bluetooth
device like a smart phone, computer, etc. Then it will automatically begin to
scan for nearby bluetooth devices.
Step 3: Tap the entry for bluetooth accessory when it is detected by the
smart phone or computer and displayed on the screen. Then it will be able to
use bluetooth to operate in conjunction with accessory.
REMOTE FUNCTIONS
1. Power
2. Mode
3. Repeat Track
4. EQ Mode
5. CH-
6. CH+
7 Previous Track
8Next Track
9. Pause & FM Scan
10. VOL-
11. VOL+
12. 1 23 4 5 6 7 8 9 0
-
Power Switch: Press this switch turn on and off the speaker
-
Mode Selector: Press this button to switch between USB, TF
FM and Bluetooth Inputs. -
Repeat Track : Tap this button to Single tune repeat
-
EQ Mode Switching
-
Previous FM Station (CH-):When using the speaker in
FM mode, press this button to go to the previous stored FM station. -
Next FM Station (CH+): When using the speaker in FM mode
press this button to go to the next stored FM station. -
Previous Track: When using the speaker in USB / TF
Card & Bluetooth mode, press this button to go to the previous track. -
Next Track: When using the speaker in USB / TF Card &
Bluetooth mode, press this button to go to the next track. -
Pause & FM Scan: Press this button to pause the signal from the USB flash drive TF Card or Bluetooth Inputs. When using the speaker in FM mode, press this button to auto scan for all available stations.
-
VOLUME-
-
VOLUME+
-
1 2 3 4 5 6 7 8 9 0
KEY-PRESSING FUNCTION
Source Selection (Function/Mode): It is used to switch the external sound
source or built-in MP3 or FM radio sound source as the power to be amplified
until the horn produces sound.
Playing/Pause Key: Press the key to pause the playing song when it is under
playing status; press the key again to continue playing.
The previous song or the next song (PREV/NEXT): press the key to play the
previous or next song in the playing list under playing status; some machine
types have long-term pressing (longer than five seconds) as sound +/sound-
compound function.
STOP: Press the key to stop playing under playing status. The machine
will stop playing songs.You are suggested to stop playing first when changing
USB disk/ TF Card.
REPEAT: If you want to play single song or all the songs circularly when
playing, you can press panel or “repeat” key on the remote control. Press once
to repeat single song and press for the second time to play all the songs
circularly; press the third time to recover to the playing status in defaulted
sequence. Press it 3-4 seconds, will ON/OFF the MIC priority.
Remote receiving window (REMOTE): Never cover the window which will receive
the infrared remoted control order.
Recording Function (REC): Pressing the button for at least 3 seconds, then
speak with the MIC press REC again. Then press play. After these steps you can
hear what you have recorded.
SAFETY MEASURES
- In order to keep battery life longer, kindly charge the battery every time after the battery power is finished, or it will damage the battery if you keep it long time without charge or not using it for long period of time, so kindly use it after regular interval of time.
- Our company reserves the right to bring changes in product without any notice.
- If any issue with the product you can contact the professional person to handle as this unit is high power, so please don’t open the unit.
FOR FIRST TIME USE FULLY CHARGE THE DEVICE UNTIL THE LIGHT INDICATOR TURNS OFF
AS INSTRUCTED IN THE MANUAL.
This can take up to approximately 8 hours to fully charge. If you don’t, the
device will not function at full capacity.
PROMPT
When people sleep, they need a quiet environment. Please turn off music or
turn off the power while sleeping.
This symbol indicates to user that the machine with risk of electric shock
This symbol indicates to user that the machine with important operation and
maintenance
instruction
Axess Products Corporation
9409 Owensmouth Ave. Chatsworth, CA 91311
Tel: 818-785-4000 • Fax:
818-785-5081 •
[email protected] Questions? Comments? Contact us
at [email protected]
© 2018 Axess Products Corporation. All rights reserved.