AXESS 15″ Portable Bluetooth Party Speaker PABT6031 User Manual
- June 6, 2024
- Axess
Table of Contents
AXESS 15″ Portable Bluetooth Party Speaker PABT6031 User Manual
For correctly operating, please read this manual carefully before using. Any content revise of the manual won’t declare again, and we are not responsible for consequence cause by fault or oversight of this manual.
PABT6031 SPECIFICATIONS
- 15 ” Bluetooth Speaker
- 1.5″ Tweeter
- USB Flash Drive input Aux 3.5mm line-in Input
- FM radio
- TF card slot
- Bass/Treble/Echo Adjustments
- Digital LED display
- Microphone Input
- Small Remote Control
- wired Microphone included
- 7000 pmpo watt power 1
- 9V adaptor charger
- 7.4V/3600mAh battery 5
- With extendable handle bar
REMOTE CONTROL FUNCTION
- Power Switch: press this switch turn the 11 speaker On and Off
- Mode Selector: pess this button to switch between USB, TF, FM and Bluetooth inputs
- Repeat Track: tap this button to single track repeat
- EQ Mode Switching
- Previous FM Station (CH-): when using the speaker in FM mode, press this button to go to the previous saved FM station
- Next FM Station (CH+): when using the speaker in FM mode press this button to go to the next stored FM station
- Previous Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track
- Next Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the next track
- Pause & FM scan: Press this button to pause the signal from the USB flash drive, TF Card, or bluetooth inputs. When using the speaker in FM Mode, press this button to auto scan for all available stations.
- Volume –
- Volume +
- Number pad 0-9
PANEL FUNCTION LAYOUT
- DC Charging port: insert the charging adapter into the DC9V input port on the rear of the unit. When the battery is charging this indicator will illuminate. When the battery is fully charged the indicator will turn off.
- Main volume knob: use this knob to adjust the volume of USB/TF/BTL/FM music.
- Treble Knob: use this knob to adjust the treble levels.
- Bass Knob: Use this knob to adjust teh bass levels.
- Microphone Volume Knob: use this knob to adjust the microphone volume levels
- Microphone Echo Knob: use this knob to adjust the microphone echo levels
- LED lights Power button: press this button to turn on and off the front LEDs
- USB/TF Display screen: the elapsed time and format will appear on this display screen for the usb USB/TF card inputs
- FM Antenna: For best results fully extend the antenna
- USB Flash Drive input: insert your USB flash drive into this slot. The unit will only read mp3, .wav, .wma files from the USB flash drive. The maximum storage size of the USB flash drive cannot exceed 32GB. Do not attempt to connect a computer to the USB input as the speaker will not be able to connect to a computer.
- TF Input: Insert your TF card into this slot. The unit will only read .mp3, .wav, .wma files from the TF card flash drive cannot exceed 32GB
- Next Track/Next FM station (CH+): When using the speaker in USB/TF card & Bluetooth mode, press this button to go to the next track. When using the speaker in FM mode, press this button to go to the next stored FM station.
- Play/Pause & FM scan: press this button to pause the signal from the USB flash drive TF card or Bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations. Each will be stored. Press the CH+ and CH- to choose a station
- Previous Track/Previous FM station (CH-): when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track. When using the speaker in FM mode, press this button to go to the previous stored FM station.
- Repeat track: Tap this button to single track repeat.
- Mode selector/recording: press this button to switch between USB, TF and bluetooth inputs. press and hold for 3-5 seconds to begin recording onto the USB flash drive or TF card. Steps to Connecting via Bluetooth: start by pressing the mode selector button until the word BLUETOOTH displays on the control panel LED screen or mentioned. Make sure that the your mobile device has its Bluetooth mode turned ON as well. Search for the device name “PABT6031” on you mobile device screen and activate the connection between between both devices. Your audio should automatically begin to play.
- Microphone priority when the microphone priority is activated, speaking into the microphone will automatically lower the other audio signal 20dB.
- AUX Input: connect your smartphone, mp3 player, laptop or other audio device to this input.
- Insert Microphone to front panel Mic Jack, adjust Mic Volume and Echo to best level.
- Power Switch: Press this switch turn ON and OFF the speaker. Before powering on the speaker make sure the volume levels are turned down to prevent damage to the amplifier or speakers.
ATTENTION!
FOR FIRST TIME USE FULLY CHARGE THE DEVICE UNTIL THE LIGHT INDICATOR TURNS OFF AS INSTRUCTED IN THE MANUAL.
This can take up to approximately 8 hours to fully charge. If you don’t, the device will not function at full capacity.
Prompt
When people sleep. they need a quiet environment. Please turn off music or
turn off the power while sleeping.
This symbol indicates to user that the machine with risk of electric shock
This symbol indicates to user that the machine with important operation and maintenance instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>