HOLMAN DLRGB4505 RGB Colour Deck Lights User Guide
- June 6, 2024
- Holman
Table of Contents
ø45mm RGB Colour
Deck Lights
User Guide
4-Pin Plug + Socket Connection
Holman RGB Colour Deck Lights use a 4-Pin Plug + Socket connection.
Only other Holman 4-Pin Plug + Socket products are compatible with these
lights. These lights are not compatible with other brands and will void your
warranty if used with other brands.
https://www.holmanindustries.com.au/category/lighting/ww-garden-lights/
Overview
Introduction
Thank you for purchasing Holman 45mm RGB Colour Deck Lights.Our system is
completely DIY and designed to help illuminate and add ambiance to your
outdoor space. These can also be used to light up wooden steps or create a
safety barrier around the edge of your decking.
This instruction manual contains useful information on the proper use and care
of this product. Please read through all instructions before attempting
assembly. Keep this user guide handy for future use.
Package Contents
- 5× 30mm DAISY-CHAIN deck lights
- 1× 30mm END deck light
- 1× 4-Pin Connection Tee
Setup
Choosing your controller
Holman has a range of lighting controllers to suit all users. Choose the
correct RGB Colour Lighting Controller that suits your requirements.
RGB Colour Wi-Fi Garden Light Controller
Our latest Lighting Controller features Wi-Fi connectivity, allowing access to
your Garden Lights from anywhere in the world. Smart automation and custom
scene options allow you to light up your garden, however, you want.
Control your garden from anywhere in the world, day or night, with Holman Home Wi-Fi control. Enjoy complete control of your irrigation and garden lighting, wherever internet access is available.
http://holmanindustries.com.au/hh/?=qr
RGB Colour Bluetooth ® Garden Light Controller.
Our Garden Light-Controller gives you custom scenes and full brightness
control with a Bluetooth® connection and the iGardener™ app. Connect up to 4
controllers to one device.
Take full control of your garden watering and lighting with a Bluetooth®
connection and a tap of your iPhone or Android, with the iGardener™ smartphone
app! https://www.holmanindustries.com.au/igardener-smartphone-app/
Mounting your controller
Before beginning the installation of your Deck Lights, you will need to
install your Lighting Controller to determine your starting point.
For ease of use, eye-level placement is recommended.
Ideally, your controller location should not be exposed to rain or areas prone
to flooding or heavy water.
- Install the Lighting Controller [a] near a 240V AC power point ideally located in a house, garage, or exterior electrical cubicle
All Holman controllers have a 60w capacity. Lighting set-ups that include more than 60w of garden lights will require additional controllers
Installation
Main Lighting Cable (Extension Cable)
Once the Lighting Controller is mounted, you can connect your main lighting
cable. This cable is where you will ‘branch’ off your Deck Lights or other
Holman lighting products.
- Connect your first Extension Cable [a] to the Lighting Controller [b]
- Secure the Extension Cable by hand tightening the weatherproof end cap [c] on the end of the cable
Extension Cables are available in 1m, 2m, 5m and 10m. Choose the correct length to reach from your Lighting Controller to your first lot of Deck Lights
Connection Tee
Each pack of Deck Lights comes with a Connection Tee. This is what connects
your Deck Lights to the main lighting cable.
- Join one end of the Connection Tee [a] to the Extension Cable [b]
- Secure the Connection Tee by hand tightening the weatherproof end cap [c]
- Connection Tees come with one mini cable end [d], this end connects to your lighting product
**** Do not use more than one (1) pack of Deck Lights per Connection Tee.
Doing so may result in wattage loss
If you are connecting more than one pack of Deck Lights, refer to the
connection diagram on pages 12 and 13
Deck Light Spacing
Deck Lights come with 1800mm of space between each light when connected.
Before installation, we suggest marking your decking exactly where you want to
install your lights to ensure the spacing is correct.
Drilling Holes
Deck panels will need to be removed to hide lighting cables underneath. For
safety, we also recommend removing deck panels to ensure no other cabling is
behind.
Refer to our sizing chart below to determine the correct spade drill bit size
- Remove the deck panels that you will be drilling into
- Drill the required holes into your deck that were marked previously [a]
| 18mm
Deck Lights| 30mm
Deck Lights| 45mm
Deck Lights
---|---|---|---
SPADE DRILL
BIT SIZE| 14mm| 22mm| 30mm
https://www.holmanindustries.com.au/product/2m-2-pin-mini-spacer-cable/
Inserting Deck Lights
-
Insert both cable ends of one of your Daisy-Chain Deck Lights [a] through the first drill hole
-
Push the Deck Light into your drill hole [b] until it is flush with your decking. The metal arms will secure against the back of your dec
-
Connect this Deck Light to your Connection Tee [c] with the mini cable end
-
Insert the rest of your Daisy-Chain Deck Lights into your deck using steps 1 and 2
-
Insert the End Deck Light into the 6th drilled hole and connect to the last
Daisy-Chain Deck Light -
Connect the cabling of all
Deck Lights together
Refer to the opposing drawing for correct installation
Refer to the steps on page 12 to 13 for installing multiple packs of Deck Lights
Deck Lights Connection Drawing
1. Garden Light Controller
2. Extension Cable
3. Connection Tee| 4. Daisy-Chain Deck Lights
5. End Deck Light
---|---
Need Help? Just ask!
The Holman website has a host of additional information on features. Head to
support.holmanindustries.com.au for more tips, tricks, and support content.
If you still need help, feel free to email our friendly Customer Service team
at support@holmanindustries.com.au
or call at 08 9416 9999.
https://support.holmanindustries.com.au/?=qr
Inserting Multiple Deck Light Packs
- Attach your second Extension Cable [a] to the free end of your first Connection Tee [b] If you are continuing your row of Deck Lights from earlier, ensure that this Extension Cable is long enough to reach from your first Connection Tee, to your next empty deck light space
- Join the Connection Tee [c] from your second pack of Deck Lights to your second Extension Cable
- Install your second set of Daisy-Chain Deck Lights [d] and End Deck Light [e] as per the previous steps on page 10
- If you are ending your lighting system here, ensure to attach the weatherproof end cap [f] onto the end of your Connection Tee
To expand your lighting system further, join additional
Extension Cables, Expansion Tees or Connection
Tees to your second Connection Tee
Specifications
45mm RGB Colour Deck Lights
Input | 12 V |
---|---|
Light Output | 0.5w per light |
Pack Output | 3w total |
Size | ø45mm |
Height | 26mm |
Drill Bit Size | 32mm |
Brightness | 12 lm |
Beam Reach | 1m max |
Colour Range | RGB |
Beam Angle | 120º |
Lifespan | 50,000 hrs |
Waterproof Rating | IP67 |
Connection | 4-Pin Plug + Socket |
Housing | Stainless steel and polycarbonate |
Deck Light Cable Length | 1800mm |
Deck Light Cable Diameter | 10mm |
Leader Cable Length | 900mm |
Warranty
2 Year Replacement Guarantee
Holman Industries offers a 2-year replacement guarantee with this product.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
As well as your statutory rights referred to above and any other rights and
remedies you have under any other laws relating to your Holman product, we
also provide you with a Holman guarantee.
Holman Industries guarantees this product against defects caused by faulty
workmanship and materials for 2 years of domestic use from the date of
purchase.
During this guarantee period, Holman Industries will replace any defective
product. Packaging and instructions may not be replaced unless faulty.
In the event of a product being replaced during the guarantee period, the
guarantee on the replacement product will expire 2 years from the purchase
date of the original product, not 2 years from the date of replacement.
To the extent permitted by law, this Holman Replacement Guarantee excludes
liability for consequential loss or any other loss or damage caused to
property or persons arising from any cause whatsoever. It also excludes
defects caused by the product not being used in accordance with instructions,
accidental damage, misuse, or being tampered with by unauthorized persons,
excludes normal wear and tear, and does not cover the cost of claiming under
the warranty or transporting the goods to and from the place of purchase.
Should you suspect your product may be defective and need some clarification
or advice please contact us directly:
1300 716 188
support@holmanindustries.com.au
11 Walters Drive,
Osborne Park 6017 WA
If you are certain your product is defective and is covered by the terms of this warranty, you will need to present your defective product and your purchase receipt as proof of purchase to the place you purchased it from, where the retailer will replace the product for you on our behalf.
We really appreciate having you as a customer and would like to say thank you
for choosing us.
We recommend registering your new product on our website. This will ensure we
have a copy of your purchase and activate an extended warranty. Keep up to
date to with relevant product information and special offers available through
our newsletter.
www.holmanindustries.com.au/product-
registration/
Copyright © 2021 Holman Industries