BATTERY CAM Snap 16s Security Camera User Guide
- October 27, 2023
- BATTERY CAM
Table of Contents
Snap 16s Security Camera
User Guide
What’s in the box
Please consult this checklist for all parts.
Description
| Power port | DC 5V±10% |
|---|---|
| Power on/off | Press the button for 3 seconds to turn on/off the camera |
| Status light | • Solid red light on: the camera is turning on or |
malfunctional
• Blinking red light: awaiting WiFi connection (slowly blinking)
connecting the WiFi (quickly blinking)
• Blinking blue light: currently connecting
• Solid blue light on: the camera runs correctly
SD card slot| Support local SD card storage (Max.128G)
Reset| Press and hold on for 5 seconds to reset the camera
Charging| • Solid red indicator on: battery is charging
indicator| • Solid blue indicator on: charging completed
Battery capacity| 9000mAh (two 21700 lithium-ion batteries)
Install
Mode 1 Bracket (A) Installation
Fix the bracket on the wall with screws- Bring the camera closer to the bracket
Mode 2 Bracket (B) Installation
Fix the bracket on the wall- Install the camera in the bracket and lock it with the screw
Connect
Download
SmartLife or Tuya Smart is available for both iOS and Android OS. Search the
name ‘SmartLife’,’Tuya Smart’ in App Store or Google Play, or scan the QR-Code
to download the App.
Support Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is
connected to the WiFi network.Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your WiFi.
Registration process
Step 1: Open the Smart Life App, click “Sign Up”, read the “User
Agreement Privacy Policy” and click “Agree” . Step 2: Input a legal and
valid Mobile number or Email address and click “Get Verification Code”. Input
the verification code to log in.
QR Code Configuration
- Open the Smart Life App, click “My” >> “Home Management” >> “Create a home”, and you can customize the home name and related settings.
- Click “Add Device” or “+”, and then select “Security & Sensor” >> “Smart Camera” to add camera.
- Power on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click “Next”. Then input your WiFi’s passwords and click “Next”. Click ” ” to change network.
Note:
1) Camera only supports 2.4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits.
- In this interface, you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
- When connecting, you should make sure your router,mobile,and camera are as close as possible.When camera added successfully,click ” ” you could also DIY the camera’s name.
Settings
In “Smart Camera” interface,click ” “,you can set the camera common functions.
FAQ
Q: The device cannot be previewed properly?****
– A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?****
– A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?****
– A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn’t the device identify the SD card?****
– A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?****
– A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.
Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in
App.
Full-duplex audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Low battery alarm
When the battery power is lower than your set, the App will send a
notification to your mobile phone.
Record
Using SD card or opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and consider removing the nocollocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>