EPOS SENNHEISERD IMPACT D 10 Series Premium Audio for Clear Calls User Manual

June 6, 2024
EPOS SENNHEISERD

EPOS SENNHEISERD IMPACT D 10 Series Premium Audio for Clear Calls

Specifications

Headset D 10 HS

  • Dimensions (W x H x D): 140 x 24 x 22 mm / 5.51 x 0.95 x 0.87 in
  • Weight with…: Ear hook: 22 g / 0.78 oz / 0.049 lbs Headband: 45 g / 1.59 oz / 0.10 lbs
  • Talk time: Narrowband: up to 12 hours Wideband: up to 8 hours
  • Charging time: 50%: approx. 20 min 100%: approx. 1 hour
  • Range (environment dependent): Free line of sight: up to 180 m / 590 ft in office buildings: up to 55 m / 180 ft

Base station D 10 BS Phone | D 10 BS USB ML

  • Dimensions (W x H x D): 88 x 119 x 100 mm / 3.46 x 4.69 x 3.94 in
  • Weight: D 10 Phone: 352 g / 12.42 oz / 0.78 lbs
    D 10 USB: 328 g / 11.60 oz / 0.72 lbs

Base station and Headset

  • DECT frequency range
    • EU: 1880 MHz – 1900 MHz
    • USA: 1920 MHz – 1930 MHz
  • RF output power
    • EU: max. 250 mW (EIRP)
    • US: max. 110 mW (EIRP)
  • Temperature range
    • Operation: +5 °C t o +45 °C / +41 °F to +113 °F
    • Storage: -2 0 °C to +70 °C / -4 °F to +158 °F

Power supply unit UNI PS EU/UK/AUS/US 01

  • Nominal input voltage: 100 – 240 V~
  • Nominal input current: max. 0.2 A
  • Mains frequency: 50 – 60 Hz
  • Nominal output voltage: 5.90 V DC
  • Nominal output current: max. 850 mA
  • Temperature range
    • Operation: + 5 °C to +45 °C / +41 °F to +113 °F
    • Storage: -20 °C to +70 °C / -4 °F to +158 °F
  • Relative humidity
    • operation: 20 to 85%
    • storage: 20 to 95%
  • Weight: approx. 75 g / 2.65 oz / 0.17 lbs

FCC and Industry Canada

This device complies with Part 15 of the FCC rules and Innovation, Science and Economic Development Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference; and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Changes or modifi cations made to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment.
The device complies with FCC / Innovation, Science and Economic Development Canada’s RF radiation exposure limits set forth for an uncontrolled environment. Use of other accessories not verifi ed by the manufacturer may not ensure compliance with FCC / Innovation, Science and Economic Development Canada’s RF exposure guidelines. These transmitters must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

RF Radiation Exposure Information
The device complies with FCC and Innovation, Science and Economic Development Canada RF radiation exposure limits set forth for an uncontrolled environment. The base station should be installed and operated with minimum distance of 20 cm between the radiator and your body.
Use of other accessories not verifi ed by the manufacturer may not ensure compliance with FCC/ISED RF exposure guidelines. These transmitters must not be co-located or operated in conjunction with any other antenna or transmitter.

Responsible party
Demant Sound USA, Inc.
Little Falls Drive, Wilmington 19800, New Castle, USA
Tel: +1 800-332-7439

DSEA A/S
Kongebakken 9, DK-2765 Smørum, Denmark, www.eposaudio.com, Printed in China, 04/21, 770-00263/A07

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

EPOS SENNHEISERD User Manuals

Related Manuals