ENERGETIC LIGHTING MQTL1222 5CCT 12PK Switchable White Round Dimmable LED Canless Recessed Downlight Installation Guide
- June 13, 2024
- Energetic Lighting
Table of Contents
INSTALLATION OVERVIEW
MQTL1222 5CCT 12PK Switchable White Round Dimmable LED Canless Recessed
Downlight
Locate a
suitable location for the fixture and cut a 6 ⅜ in round hole where the LED
Ultra- Thin Downlight(A) will be installed. Ensure this location has access to
electrical wire from the switch (power supply).
Select desired color
temperature.
Carefully open the hardwire junction box (B)and remove the
appropriate knockout(s).
lnsert the electrical supply cable through the knockout and
secure with a cable connector(sold separately).
Using wire nuts(BB),connect supply cable
to hardwire unction box(B) in the following manner: green to ground, white to
white, black to black. Place all wiring connections back into the hardwire
junction box (B) and close the cover.
Insert the hardwire junction box (B) through the mounting
hole established in Step 1.
Connect the LED Ultra-Thin Downlight (A) to the hardwire
junction box(B) by inserting and twisting the male/female connections of the
attached connector cables together.
Push the spring loaded clips on the LED Ultra-Thin
Downlight(A) upwards and insert the base of the LED Ultra-Thin Downlight(A)
into the mounting hole established in Step 1.Release the clips and the fixture
will grip flush with the ceiling/drywall.