VANKYO IMMERSE 2000 Music Star Light User Guide

: June 6, 2024
: VANKYO

Table of Contents

Product Overview
Remote
FUNCTION OVERVIEW
Control By Smart Assistants
SPECIFICATIONS
TROUBLESHOOTING GUIDE
CUSTOMER SUPPORT
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

VANKYO IMMERSE 2000 Music Star Light User Guide

Product Overview

Star Light
Previous Song(short press)/Volume-(long press)
Next Song(short press)/Volume-F(long press)
Nebula Light
Mode Switch Button 1(between Bluetooth mode and USB mode)
Play / Pause
USB Port
IR
Speaker
Nebular Light Brightness +/-
Mode Switch Button2
Left: Bluetooth Mode/Remote
Mode Middle: OFF
Right: Bluetooth Mode/WiFi Mode
Sound Sensor
Stand
Type-C Port

Remote

Nebula Light On/Off
Start Light On/Off
Red Light On/Off
Previous Song
Volume-
Blue Light On/Off
Nebula Light Speed + (Pause–Slow–Medium–Fast)
Nebula Light Speed – (Fast–Medium–Slow–Pause)
Timer Off
1 Hour Timer
Music On/Off
Volume +
Green Light On/Off
Next Song
Sound Sensor On/Off (press any other button except to exit)
Tip: Once the Sound Sensor is enabled, all the lights will be off, but they will flash if there is strong vibration or strong music beats nearby.
White Light On/Off
Nebula Light Brightness+/-
Star Light Control(Pulsing/Solid On)
2 Hour Timer
Single Color Mode(Red-Green-Blue-White)
Double Color Mode(RB-RG-RW-BG-BW-GW)

FUNCTION OVERVIEW

Multiple Operation Modes

Bluetooth Mode
Press the Mode Switch Button 1 or slide the Mode Switch Button 2 to the left/right to enter Bluetooth Mode, then enable the Bluetooth on your mobile phone and select SKE-TKQ01 to connect. Then you can play the music on your mobile phone and use the Music Star Light as a speaker.

USB Mode
Once you insert the USB disk into the USB port, there will be a voice prompt of “Music Mode.” The Music Star Light will automatically play the music in your USB disk after 5 seconds.
‘Press to switch between Bluetooth Mode and USB Mode.

WiFi Mode
Slide the Mode Switch Button 2 to the right to enter WiFi Mode, then connect your mobile phone to the WiFi of the Music Star Light. Then you can control the light via Smart Life on your mobile phone.

APP Downloading and Installation Search for Smart Life from App Store'” / Google Play'” or scan the QR code to download and install.
WiFi Connection
Step 1: Power on your Music Star Light, and enter WiFi mode.

Step 2:
Connect to WiFi
Option 1: Auto Connection(Auto Scan)
IMPORTANT: Turn on the bluetooth and GPS of your phone to locate your device.

Connect to WiFi

How to reset:
Before connection, please repeatedly slide the Mode Switch Button 2 for three times following the order of OFF- WiFi(Right)-OFF -WiFi(Right)-OFF WiFi(Right) until the light flashes quickly.

Option 2: Manual Connection

How to reset: Before connection, please repeatedly slide the Mode Switch Button 2 for three times following the order of OFF-WiFi(Right)-OFF-wif i(Right)-OFF-WiFi(Right) until the light flashes quickly.

Control By Smart Assistants

Make sure you have successfully connected the Music Star Light to Smart Life before controlling by Smart Assistants.

Control the Music Star Light with Amazon Alexa

Control the Music Star Light

Note:
Please follow the instructions below to add device if the light is not added to your Alexa account

Add light to Alexa account

Voice Commands for Alexa are as follows:

Alexa, turn on Music Star Light
Alexa, turn off Music Star Light
Alexa, set music star light to 20 percent
Alexa, brighten/increase Music star light
Alexa, dim/decrease Music star light
Alexa, set Music Star light to green

Control the music star light with Google Home

Control with Google Home

Voice Commands for Google Home are as follows:
Hi Google, turn on Music Star Light
Hi Google, turn off Music Star Light
Hi Google, set Music Star Light to 20 percent
Hi Google, brighten/increase Music Star Light
Hi Google, dim/decrease Music Star Light
Hi Google, set Music Star Light to green

SPECIFICATIONS

Laser Level: Class 2 (Class II)
Laser Wavelength: 507nm-Green +/- 10nm
Laser Power Output: <1mW per beamlet
Transmit Power: <16dBm
Frequency Range: 2412 MHz to 2472 MHZ

TROUBLESHOOTING GUIDE

Why can’t I control the Music Star Light through my APP?

Please check if you have connected your phone to a 2.4GHz WiFi; this product does not support 5G network.
Then repeatedly slide the Mode Switch Button 2 for three times following the order of OFF-WiFi(Right)-OFF-WiFi(Right)-OFF WiFi(Right)until the light flashes quickly.

FCC CAUTION

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC WARNING

This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

Caution

The symbol indicates Dc voltage

Recycling

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. This product can be used across EU member states. The device is low power device, it can meet the requirement of the RF exposure. EU Compliance Statement: Shenzhen VanTop Technology & Innovation Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at https://doc.vantop.com/.

Icon