VANKYO 6424701 Leisure 470 Wireless Mini Projector User Manual

VANKYO 6424701 Leisure 470 Wireless Mini Projector

PACKING LIST

1. LEISURE 470
2. Remote (Batteries Not Included)
3. Carrying Bag
4. User Manual
5. AV Cable
6. HD Cable
7. Power Cable

NOTICE

Recommended

NOT Recommended

FUNCTION OVERVIEW

QUICK START

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Connect your device to the projector correctly.
4. Press the power button to turn on the projector.
5. Select the correct input source to project your device.
6. Adjust the kickstand accordingly.
7. Adjust the keystone and focus ring to get the best image performance.
8. Press the power button twice to turn off the projector.

INPUT SOURCE

Press on the projector or remote to enter the interface of Input Source.

A.USB Connection

B.HD Connection

C.VGA Connection

D.Screen Mirroring

PROJECTOR CONNECTIONS

SCREEN MIRRORING

Important:

Before screen mirroring, please press the button on the projector/remote to enter the interface of Input Source and select Screen Mirroring.

Screen Mirroring through Wireless Connection
For iOS System
*Streaming with cellular data

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.
2. Go to the settings of your iOS mobile device and connect it to the WiFi of LEISURE470-XXXXXX (pwd: 12345678). Please ignore the exclamation mark before it.
3. Swipe up the screen of your iOS mobile device, then tap Screen Mirroring/AirPlay Mirroring and search for the projector.
4. Select LEISURE470-XXXXXX from the searching results to connect.
5. The display of your iOS mobile device will be projected to the wall/screen via cellular data after a successful connection.

streaming with your router’s WiFi

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.
2. Go to the settings of your iOS mobile device and connect it to the WiFi ofLElSURE470-XXXXXX (pwd: 12345678).
3. Visit http://192.168.49.l from a browser on your mobile device, tap WiFi AP> Scan, select your router’s WiFi and enter the right password, then tap Connect to continue.
4. Your router’s WiFi will be displayed on interface of Screen Mirroring for iOS System after a successful connection.
5. Get back to the WiFi setting of your iOS mobile device, then connect it to the same router’s WiFi.
6. Swipe up the screen of your iOS mobile device and tap Screen Mirroring to search for the projector, then select LEISURE470- XXXXXX  from the searching results to connect.
7. The live streaming content from your iOS mobile device will be projected to the wall/screen through WiFi connection.
   •- Tip: If you’d like to connect to another router’s WiFi, please repeat the procedures mentioned in the section of Streaming with your router’s WiFi.

For Android System
To activate this function, your android device must support Multi- Screen/Wireless display. Names may differ from different devices.

1. Turn on the projector, select Screen Mirroring as the Input Source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.
2. Turn ON the WiFi Switch in your Android device. Successfully connected WiFi on Android device is not a must unless the live streaming content is needed.
3. Activate Multi-Screen function in your Android device and search for the projector.
4. Select LEISURE470-XXXXXX from the searching results to connect.
5. Your Android device display will be projected to the wall/screen after a successful connection.

CAUTION

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of lOOMbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.

* Upgrade the Firmware Version of Screen Mirroring

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.

2. Go to the settings of your iOS mobile device and connect it to the WiFi of LEISURE470-XXXXXX (pwd: 12345678)

3. Visit http:f/192.168.49.1 from a browser on your mobile device, tap WIFI AP> Scan, select your router’s WIFI and enter the
   right password, then tap Connect to continue.

4. Tap Settings on the interface, scroll down to the bottom of the page, then tap Upgrade.

5. Tap OK to start upgrading the firmware version of screen mirroring module if it is available.

• Make sure the projector is connected to WIFI and DO NOT power off during updating.
• lt takes around 6-8 minutes to complete the update, please wait patiently.
• The projector will automatically reboot once the upgrade is completed.

Tip:

After entering the interface of Screen Mirroring for iOS system, you can press and hold the OK button to reset the firmware version of screen mirroring.

Screen Mirroring with the USB Cable

For iOS System

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.
2. Connect your iOS mobile device to the USB port of the projector with the ORIGINAL lightning cable.
3. Select Trust in the pop-up window ofTrust This Computer.
4. The display of your iOS mobile device will be projected to the wall/screen after a while.

For Android System

1. Turn on the projector, select Screen Mirroring as the input source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.

2. Go to the settings of your mobile device, find Developer options and turn on USB debugging.
   Tip:
   The steps to turn on Developer options vary from different models of Android device. You may check it from Internet or contact us for the detailed steps. We take Samsung Galaxy SB+ as an example.
   • Go to settings of your Android device, then tap About phone> Software information> Build number.
   • Continuously tap on Build number for several times until it shows Developer mode had been turned on.
   • Get back to the settings of your mobile device, it will show Developer options.

3. Connect your Android mobile device to the USB port of the projector with the ORIGINAL USB cable.

4. Tap OK when your Android mobile device pops out the windows of Allow USB debugging?, then your Android device will be projected to the wall/screen.

1. The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data, otherwise screen mirroring may fail. You
   can plug the cable into your laptop to check the availability of transferring the data.

2. Some mobile devices may not support screen mirroring due to the compatibility.

3. Some Android mobile devices may only transfer the display without audio due to the protocol restrictions.

PROJECTION DISTANCE&SIZE

The recommended projection screen is around 90 inches with a projection distance of around 9.84ft. Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

Display Technology| ****

LCD

| Light Source| ****

LED

---|---|---|---

Resolution

| ****

Native 1280 x 720

| Input Signal| ****

576L 720P, 1080i, 1080P

Aspect Ratio| ****

4:3/16:9/Auto

| ****

Focus

| ****

Manual

Keystone

| ****

±15′

| ****

Installation Type

| ****

Front/Rear/Ceiling

Speaker| ****

3W/4ohm

| Power Supply| ****

AC 100-240V, 50/60Hz

Unit Dimension

Photo Format Supported

Video Format Supported

Mounting Screws

| 221 x 168×84 mm (8.7 x 6.6 x 3.3 inch)

BMP/JPG/PNG/GIF/JPEG

AVI/MP4/MKV/FLV/MOV/ RMVB/3GP/M PEG/H.264/ XVID

M4 Metric

| ****

Unit Net Weight

Audio Format Supported

Ports

Screw Number

| ****

1.35kg (2.981b)

MP3/WMA/MP2/AAC/FLAC/PCM

HD In x 2/USB Port x 1/Audio Out x 1/ AV In x 1/VGA Port x 1/SD card slot x 1

3

TROUBLESHOOTING GUIDE

1. Blurry Image

   • Adjust focus ring/keystone.
   • Projector and screen/wall must be in effective distance.

2. Remote Unresponsive

   • Make sure remote points at IR receiver directly.
   • Do not cover IR receiver.
   • Try a new pair of AAA batteries.

3. Mobile Connection
   • 10S: Genuine lightning to HDMI cable.
   • Android: Micro USB to HDMI adapter/Type C to HDMI cable.

4. Upside Down Images
   • Go to Menu> PICTURE> Projection Direction to flip the projection image.

VANKYO SUPPORT

North America  [email protected]
United Kingdom [email protected]
Deutsch land [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>