SmallRig SR-RG1 Wireless Shooting Grip User Manual

SmallRig SR-RG1 Wireless Shooting Grip

SR-RG1

Wireless Shooting Grip ‒ User Manual __

In order to ensure users’ safety and prevent damages to the product due to any improper use, please carefully read the “Warnings”below and properly keep this User Manual for future reference.

Foreword
Thank you for purchasing SmallRig’s product.

Warnings

• Please read this User Manual carefully. Please do not use the product in water.
• The product contain electronic components, do not let the product fall to the ground, be hit, or suffer a violent impact.
• Please do not use the product in a completely closed environment. It may increase the internal temperature of the product, which causes product failure, ignition, or other accident.
• Never remove the non-detachable lithium battery in the product without permission.
• When the battery of the product is not in use for a long time, please charge and discharge the battery every six months, and provide it with about 60% of the electric quantity to prolong its service life.
• Since there are some hazardous substances in the battery of the product, please do not discard it. Instead, dispose of the product that is damaged or will never be used according to the waste management measures.
• When the product is not in use, it should be stored in a dry and clean place. Avoid high temperature, high humidity, and strong magnetic field.

Intended Use

• Please read this User Manual carefully, especially the “Warnings”.
• Please use or store the product in the environment mentioned herein.
• Failure to use the product as per this User Manual or under the specified working and storage conditions will be deemed as improper use.

Package List

• Wireless Shooting Grip×1
• USB type-C Charge Cable×1
• User Manual×1

Compatibility

Sony with Bluetooth

ZV-1 / ZV-E10 / RX100 Ⅶ / RX0 II / Alpha 6100 / Alpha 6400 / Alpha 6600 / Alpha 7C / Alpha 7 III / Alpha 7R III / Alpha 7R IV / Alpha 7S III / Alpha 9 / Alpha 9 II

Canon

EOS M6 Mark II / EOS M50 / EOS M50 II / EOS M200 / EOS R / EOS R5 / EOS R6 / PowerShot G5X II / G7X III

Identifying the parts

1. 1/4” Camera Screw
2. Rotate Button
3. Tilt Button
4. Battery Level and Charging Indicator
5. Bluetooth Indicator
6. TW: Zoom Button
7. FOCUS/PHOTO Button
8. REC Button
9. ON/OFF Button
10. C1 Button
11. Charging Port

Features

Please do not use the grip as tripod when extended.

Pairing

Sony Camera with Bluetooth

1. Turn on the remote

2. Pairing the unit with the mounted camera.
   Select MENU—Network—【Bluetooth Settings】—【Bluetooth Function】—【On】.
   Select MENU—Network—【Bluetooth Rmt Ctrl】—【On】. Select MENU—Network—【Bluetooth Settings】—【Pairing】.

3. Press the REC button and C1 button until the indicator light on the right side flashes

4. When a confirmation message SR-RG1 appears on the camera’s screen, select【OK】.

5. When pairing is complete【, Paired】appears, select【OK】.

Canon Camera with Bluetooth

1. Turn on the remote
2. Set the camera drive mode to【Remote】or【Self-timer:10 sec/remote or 2 sec remote】.
3. Select MENU—Network—【Bluetooth Settings】—【Bluetooth]—【Enable】.
4. Select MENU—Network—【WiFi/Bluetooth connection】—【Connect to Wireless Remote】—【Add a device to connect to】.
5. Press the REC button and C1 button until the indicator light on the right side flashes
6. When a confirmation message “Paired with SR-RG1”appears on the camera’s screen, select【OK】.

• Depending on the camera, the setup method for remote control shooting may differ, please refer to the instruction manual for your camera.

Indicator Light

1. Left Indicator flicker four bars at battery level of 75%~100% flicker three bars at battery level of 50%~75% flicker two bars at battery level of 25%~50% flicker one bars at battery level of 1%~25
2. Right Indicator
   Constant lighting means Bluetooth is connected successfully, while flickering means Bluetooth is not connected.

Product Specification

** _Service Warranty

_**

Please keep your original purchase receipt and warranty card, including your purchase date, product serial number, etc., which are required for the warranty service.

After-sale warranty terms

1. 7 Days DOA Return Policy: Within 7 Days from the package receipt date, return or replacement can be done if the item received is malfunctioning or physically damaged (non-artificial damage), return shipping cost will be on SmallRig’s
2. 30 Days Free-Reason Return Policy: Within 30 Days from the package receipt date, return or replacement can be done if the item is in good condition (without any malfunction or physical damage ). The return shipping cost will be on the customer’s
3. Year Warranty: Within 1-year from the package receipt date, the defective product (non-artificial damage) is eligible to get repair/ replacement for free. The defective product (artificial damage) will be charged for repairing/replacement based on the damage level.

This warranty does not cover

1. Defect caused by users’ violation of the “Warnings” and “Intended Use”.
2. The product identification or SN label is removed or defaced in any
3. The product is serviced or repaired by anyone other than our company or the service agency authorized by our company.

Serial No.|
---|---
Item Name|
Purchase Date|
User Name|
Mobile|
Address|
Receipt|

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement

English:This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause
• This device must accept any interference, including interference that may cause undesired operation of the

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

RF Exposure Statement

The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>