BOSMA KPBOB01 Fingerprint Keypad User Manual
- June 6, 2024
- Bosma
Table of Contents
KEYPAD
User Manual
PRODUCT DESCRIPTION
DEFAULT ACTIONS:
UNLOCK: Enter passcode IS to unlock
LOCK: Press to lock.
IN THE BOX 
TOOLS YOU MAY NEED
INSTALLATION – KEYPAD
Pull out the battery cover at the bottom.
Insert the batteries. See battery orientation at the back of the keypad.
Place the battery cover back.
INSTALLATION OPTION 1: WITH DOUBLE-SIDED TAPE
Remove the backing of the adhesive at the back of the mounting plate. Stick
the mounting plate to the place where you wish to install the keypad.
Mount the bottom of the keypad to the mounting plate,
press the keypad against the mounting plate. 
INSTALLATION OPTION 2: WITH SCREWS
Place the mounting plate on the wall at the position where you wish to install
it. Use a pen to mark the two holes on the wall.
Use the provided drill bit to drill two holes at the marked spots.
Insert the plastic anchors into the two holes, use a hammer to gently tap them
in until they are flush with the wall. 
Place the mounting plate over the
two screw holes, use the provided screws to secure the mounting plate against
the wall.
Mount the bottom of the keypad to the mounting plate,
press the keypad against the mounting plate. 
GETTING STARTED
(1) Follow the Installation Guide to install the Keypad.
(2) Download “Tuya Smart” from Google Play or App Store. Or scan the QR code
below to download.
https://smartapp.tuya.com/tuyasmart
(3) Log in to Tuya Smart or create a new account.
(4) Make sure to have set up the Smart Lock before adding the Keypad.
Notice: Please follow the steps if you failed to add the Keypad in the
App.
(1) Open the battery cover of the Keypad,
(2) Press and hold both the unlock, lock key and close the battery cover.
(3) Keypad is reset successfully when you hear a beep and release the keys.
Step 1
Tap+to add
Step 2
Tap Audio Scene Step 3
Wait for the keypad to show up and tap next.
Step 3
Wait for the connection to complete.
Step 3
Tap Done when the keypad is added successfully.
Step 6
Tap the keypad icon in the App.
Step 7
Wait for the keypad to connect and tap Bind a lock first.
Step 8
Tap Add to add
Step 9
Select the Smart Lock you wish to bind and tap “Start Binding”. Wee Lock
Step 10
Binding in progress…
Step 11
Tap the “e icon to return to the previous menu. < Boobs Lock
Step 12
Tap the key icon to set up a password. 
Step 13
Tap “+” to add a password.
Step 14
Choose a password type and follow the steps on the App to create a password.
Guangzhou BOSMA Technology Co., Ltd.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.