EDIFIER EDF146 Uni-Buds True Wireless Stereo Earbuds Instructions
- June 6, 2024
- Edifier
Table of Contents
EDIFIER EDF146 Uni-Buds True Wireless Stereo Earbuds
Model: EDF200025
Functional operation instructions
- Power on: when in the charging case, power on automatically while the case is opened.
- Power off: when placed in the charging case, power off automatically while the case is closed.
Bluetooth connection
- Place the earbuds in the charging case, press and hold the button on the case for around 3 seconds to enter Bluetooth pairing, the Bluetooth icon on the screen flashes.
- Set the mobile phone to search for and connect to the Bluetooth name, take out the earbuds after pairing is successful.
TWS pairing of the left and right earbud
When TWS pairing is not connected, place the earbuds in the charging case,
press and hold the button on the case for approx. 6 seconds to enter TWS
pairing, the left and right ear icons on the display screen flash alternately.
Note: This function will not work when TWS pairing is done.
Restore to factory settings
Place the earbuds in the charging case, press and hold the button on the case
for approx. 10 seconds to restore to factory settings.
Note: Restoring the factory settings will clear the pairing records
between earbuds and mobile phones, and it will also restore the settings in
the APP to the factory settings.
Functional Operation
Rated input: 5V 60mA (earbuds) 5V 500mA
(charging case)
Note: To avoid misoperation, the button will only respond when the
charging case is opened.
Note: Images are for illustrative
purposes only and may differ from the actual product.
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Other trademarks and trade names are those of their respective owners.
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
IC statement: CAN ICES-3(B)/NMB-3(B).
FCC ID: Z9G-EDF146
IC: 10004A-EDF146
Declaration for EU
Frequency Band: 2400Mhz – 2483.5Mhz
RF Power Output: ≤20 dBm (EIRP)
There is no restriction of use.
Hereby, Edif ier International Limited declares that the radio equipment type
EDF200025 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.edifier.com/int/eu-doc.html
Rated input: 5V 60mA(Earbuds) 5V 500mA(Charging case)
Model: EDF200025
Edif ier International Limited
P.O. Box 6264
General Post Off ice
Hong Kong
www.edifier.com
© 2021 Edif ier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures and
illustrations shown on this manual may be slightly different from actual
product. If any difference is found, the actual product prevails.
V1.2 IB-200-UNIBUS-02
FCC Regulatory Compliance
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation,
Science and Economic Development Canada’s license-exempt RSS(s). Operation is
subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique
- Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
- L’appareil ne doit pas produire de brouillage;
- L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102
établies pour un environnement non contrôlé.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>