Telink TLSR9517CBAR56D EVB Wireless Headset and TWS Solution User Manual
- June 6, 2024
- TELINK
Table of Contents
Telink TLSR9517CBAR56D EVB Wireless Headset and TWS Solution User Manual
Telink EVB TLSR9517CBAR56D
User Manual
AN-20082700-E1
Ver.0.1.0
2021/10/26
Keyword
Feature;2.4GHz; User manual
Brief
This is a user manual for Telink TLSR9517CBAR56D EVB
Published by
Telink Semiconductor
Bldg 3, 1500 Zuchongzhi Rd,
Zhangjiang Hi-Tech Park, Shanghai, China
© Telink Semiconductor
All Right Reserved
Legal Disclaimer
The information contained in this document is confidential, privileged, and proprietary to Telink Semiconductor (Shanghai) Co, Ltd. and its related entities (“Telink”). The use and dissemination of this document is governed by the confidentiality/non-disclosure/disclaimer statement herein. Information in this document is intended for use by the intended recipient. This document may not be used, disclosed, published, disseminated, copied or distributed to any third party other than the intended recipient without the prior written consent of Telink which may be withheld in Telink’s sole discretion. Under no circumstances may this document be disclosed to a competitor of Telink. Any unauthorized use or disclosure is strictly prohibited.
Copyright © 2020 Telink Semiconductor (Shanghai) Ltd, Co.
Information
For further information on the technology, product and business term, please
contact Telink Semiconductor Company (www.telink-semi.com).
For sales or technical support, please send email to the address of:
telinkcnsales@telink-semi.com
telinkcnsupport@telink-semi.com
Revision History
Product Introduction
This is a user manual for Telink Audio EVB TLSR9517CBAR56D.
1.1 General description
The Telink EVB TLSR9517CBAR56D, which is based on Telink TLSR9517C chip.
The TLSR9517C supports standards and industrial alliance specifications
including Bluetooth 5.2, LE, The
TLSR9517C combines he features and features needed for high quality wireless
audio equipment into a single SoC.
1.2 Key features
1.2.1 RF Features
- Bluetooth
- Bluetooth Compliant,BLE 1 Mbps and 2 Mbps
- Tx output power: up to +10 dBm @ BR/BLE mode
- RSSI monitoring with +/-1 dB resolution
1.2.2 Chip Features
Support connection control with DSP
1.2.3 Audio Mode Features
1. Audio LE mode supports two outputs
2. Support seven-channel audio I2S output
1.3 Supply power
The TLSR9517CBAR56D only supports supply power via USB(5V).
As shown in figure 2-1, the marker is the USB port. Power can be supplied when
USB is plugged in.
Figure 2-1 USB power supply
NOTICE:As shown in figure 2-2, the marker is the 3.3V and GND port. It is only used for the power supply of downloading firmware, the chip may not work under normal use.
Figure 2-2 3.3V power
Download firmware
There are one ways to download firmware, SWS burning. But need another burning tool Telink Burning EVK. Telink Burning EVK have 3.3V/SWS/GND port. When using SWS download firmware, connect 3.3V/SWS/GND of dongle to 3.3V/SWM/GND of Burning EVK. The connection mode is shown in Figure 2-2.
Functions of each module
As shown in figure 2-3, The functions of each module on the board have been marked.
There are LED, key, ANT, I2S port and debug port on board. The LED lights can indicate what status the TLSR9517CBAR56D is in. The key allow us to control TLSR9517CBAR56D. We can use debug port to debug TLSR9517CBAR56D. We can input/output I2S data through the I2S part.
The TLSR9517CBAR56D support audio line-in/out and mic-in functions. Realize this functions according to different software configurations.
Figure 2-3 Function modules on the board
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>