Telink TLSR9518A Dongle User Guide
- June 16, 2024
- TELINK
Table of Contents
Telink TLSR9518A Dongle
Product Information
Specifications
- Model: TLSR9518A
- Supported Standards: Low Energy (LE), Indoor Positioning
- Package: TLSR9518APDG80D-V1 Burning EVK for TLSR9518A
- Includes: Dupont line
Product Introduction
1. General Introduction
The TLSR9518A is a high-quality wearable device that supports standards and industrial alliance specifications, low energy (LE), and indoor positioning.
2. Core Board Introduction
2.1 Dongle Introduction
The TLSR9518A provides long-range transmission capabilities and is designed for indoor use only.
2.1.2 POWER and SWS Connection
The core board has the following power and SWS connections:
- 3V3 to GND SWM
- 3V3 to GND SWS
Product Usage Instructions
To use the TLSR9518A dongle, follow these steps:
Step 1: Unboxing and Package Contents
Open the package and ensure that it contains the following items:
- TLSR9518APDG80D-V1 Burning EVK for TLSR9518A
- Dupont line
Step 2: Dongle Setup
Connect the dongle to a power source using the provided Dupont line.
Step 3: Pairing and Configuration
Follow the instructions provided by the manufacturer to pair and configure the dongle with your device or system.
Step 4: Usage Guidelines
Ensure that the dongle is used indoors only. It provides reliable long-range transmission for your wearable device.
Frequently Asked Questions
- Q: What standards does the TLSR9518A support?
- A: The TLSR9518A supports low energy (LE) and indoor positioning standards.
- Q: Can I use the dongle for outdoor activities?
- A: No, the dongle is designed for indoor use only.
Product introduction
General introduction
The TLSR9518A supports standards and industrial alliance, low energy (LE), and indoor positioning The TLSR9518A combines the features and functions needed for high-quality wearable.
Package Material list
TLSR9518APDG80D-V1 Burning EVK for TLSR9518A, Including the Dupont line
Core Board Introduction
Dongle introduction
The TLSR9518A supports standards and industrial alliance specifications, low energy (LE), indoor positioning,
The core board has the following characteristics
Clock source of 24 MHz & 32.768 kHz Crystal and 32 kHz / 24 MHz embedded RC
oscillator, among which the external 24MHz crystal is to calibrate internal 32
kHz clock, the internal 32 kHz oscillator is for low precision application,
the external 32.768 kHz crystal is for high precision application Up to 48
GPIOs. All digital 10s can be used as GPIOS. Configurable to select 2-wire SDP
or 4-wire JTAG debug interface SPI/12C/UART with hardware flow control and
7816 protocol support It can provide long-range to the transmitter
This device complies with neer the receive, elation is subject that may louse
unde co tens this device may not cause harmful interference, and 2) by turning
the equipment off and on, the user is encouraged to try correct the
interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
POWER and SWS connection
Documents / Resources
|
Telink TLSR9518A
Dongle
[pdf] User Guide
TLSR9518A Dongle, TLSR9518A, Dongle
---|---