ZINGYOU S2 Wireless Microphone System User Manual

June 6, 2024
ZINGYOU

ZINGYOU S2 Wireless Microphone System

Thank you for purchasing ZINGYOU S2, a professional UHF wireless microphone system designed for home karaoke, , party, singing, wedding, church.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

Item Check List

Confirm that the package contains the following items:

Wireless receiver

|

Power cord

---|---

2 handheld microphones

|

2 foam covers

|

6.35mm audio.cable

2-anti- slip rings

|

User Manual

Function Details


Rotate to Install the Battery
The battery is not included

Receiving antenna
Power button (long press for 2s to turn it on/off)
Volume adjusting knob for microphone A
LCD display screen
Volume adjusting knob for microphone B

ANT B
XLR Out (the cable is not included)
6.35mm (1 /4″) Sound Out
DC-IN
XLR Out (the cable is not included)
ANT A

Let’s Go Get Started with ZINGYOU S2

Before using your S2 wireless handheld microphone, please carefully check whether the accessories in the kit are missing, and make sure that the device you are about to connect has a 6.35mm microphone input interface. Now you can start your career in fluorescent audio quality.

TIPS

  1. You need to connect this system to extra audio equipment, like an amplifier/speaker to output the sound.
  2. Please keep the receiver away from Bluetooth or other digital devices (such as cellphones, DVDs, etc.) to avoid potential sources of interference.
  3. During use, please avoid the microphone and receiver too close, in order to avoid feedback and statics.
Model: S2 Bit Rate: 24bit
Type: Dynamic S/N Ratio: 96dB
Directivity: Unidirectional THD+N: 0.5%
Sensitivity: -52dB±1.5dB Output Interface: 6.35mm+XLR
Frequency Response: 50Hz-16KHz Color: Black
Output Impedance: 6000 Display: LCD
Input Sample Rate: 48KHz Total Weight: 3.48 lb

Using Common Sense

Q1. What is the difference between a dynamic microphone and a condenser microphone?
A1: The main difference between condenser microphones and dynamic microphones is the way they generate sound signals, which leads to differences in their use. Condenser microphones mainly use sound waves to induce the vibration of the metal film to produce different capacitances to generate sound signals. It has high clarity and sensitivity, full and thick sound quality. But the disadvantage is that the sensitivity is too high, not suitable for high noise places.
On the contrary, the dynamic microphone mainly generates sound signals through the wire coil closely connected with the diaphragm, which continuously moves in the magnetic field according to the change of sound pressure.Its sound quality is rich, full, and strong against noise, which is suitable for noisy live activities.
So that, the dynamic microphones are widely used in KTV , home karaoke, party, singing, wedding, church or performances, and condenser microphones are widely used in professional vocal singing, studio recording, podcasting voiceover work.

Q2. What should I do if I find that the receiver produces a slight noise during use?
A2.

  1. Try to lower the volume of S2 and increase the volume of the speaker at the same time.
  2. It may be interfered with by the cell phone, DVD, or even the light, please be away from that stuff.
  3. During use, please avoid the microphone and receiver too close, in order to avoid feedback and statics.

Q3. The microphone is used as the device for recording. If you want to output the sound successfully, the microphone system should be connected to output equipment as follows:
A3:

  1. Equipment with a 6.35mm input interface, such as speakers, amplifiers, karaoke devices, etc.
  2. Equipment with an XLR input interface, such as an audio mixer.
    Note: It is not compatible with laptops, iPad, cellphone.
    For the specific connection methods, please refer to the connection methods in this manual.

Connection with 6.35mm Audio Cable

Receiver Screen Detail

As shown in above pictures:
① Signal levels of mic A
② Volume levels of mic A
③ Group of mic A
④ Current channel of mic A
⑤ Signal levels of mic B
⑥ Volume levels of mic B
⑦ Group of mic B
⑧ Current channel of mic B

Connection with XLR Cable

When the receiver is connected to power supply successfully, but the batteries of microphone are not installed, LCD screen will display as following pictures:

When the receiver is connected to power supply successfully, and the batteries of microphone are also installed, LCD screen will display as following pictures:

FALL IN LOVE WITH YOUR VOICE

Documents / Resources

| ZINGYOU S2 Wireless Microphone System [pdf] User Manual
BKW11, 2A3J8-BKW11, 2A3J8BKW11, S2, Wireless Microphone System, S2 Wireless Microphone System
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals