DENSO BHT-M70 Series Hand-Held Terminal User Guide

SAFETY PRECAUTIONS
BHT-M70 Series

Please read this manual thoroughly prior to operation to ensure full use of the product’s functionality, and store safely in a convenient location for quick reference even after reading.

496996-0940

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions. Meaning of Symbols

DANGER Alerts you to those conditions that could imminently lead to serious bodily injury or death if the instructions are not followed correctly.
WARNING Alerts you to those conditions which could cause serious bodily injury or death if the instructions are not followed correctly.
CAUTION Alerts you to those conditions which could cause minor bodily injury or substantial property damage if the instructions are not followed correctly.
DANGER
Handling battery
Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion.

• Never disassemble or modify the battery.
• Do not stick a needle into the battery, hammer at it, or tread on it.
• Avoid dropping or throwing the battery or letting it undergo any shock or impact.
• Do not use significantly damaged or deformed batteries. Do not use batteries when they are subject to the impact, for example, a drop impact.
• Never connect the positive and negative terminals of the battery with a wire or other metallic materials.
• Do not carry or store the battery together with ballpoint pens, necklaces, coins, hairpins, or anything else metallic. Never place the battery into or soak it in water or seawater.
• Never burn or heat up the battery. Do not use or leave the battery in places where there is excessively high temperature (60 °C or higher) such as near fire or heater.
• Do not use or store the battery in places exceeding the service or storage temperature. Never charge the battery near a fire or in strong sunlight.
• Raised battery temperature may result in leakage of battery fluid, blowout, or combustion.
• Never charge or use the battery where any inflammable gases may be emitted.
• Never apply solder directly to the battery. Do not use batteries other than the specified ones.
• If the battery fluid leaking from the battery gets into the eyes, wash thoroughly with clean water such as tap water without rubbing and obtain medical treatment immediately. Failure to do so will result in eye injuries.
• During use, charging, or storage of the battery, if odors come from the battery, the battery is overheated, discolored, deformed, or anything unusual is found, unload the battery from the BHT or charger. Do not use the battery.
• If the battery does not finish recharging within the specified time, stop recharging.

WARNING
Handling the BHT
Incorrect handling of the BHT could cause electric shock, impaired vision, skin problems, injury, burns, and the generation of heat and smoke from the BHT. Be sure to observe the following to use the device correctly.

• Never disassemble or modify the BHT.
• When the BHT is subject to a strong impact, for example, a drop impact, check the case for any damage and the battery for damage and leakage. Never use a damaged case. Never use a damaged or leaked battery.
• Do not insert any foreign materials into the battery cartridge.
• Do not get the BHT wet or put it in water or seawater.
• Never put the BHT in a microwave oven or high-pressure container.
• Never put it on the induction cooktop. Never put the BHT in places where there are excessively high temperatures, such as inside closed-up automobiles, or in places exposed to direct sunlight.
• Avoid using the BHT in extremely humid or dusty areas, or where there are drastic temperature changes.
• If smoke, abnormal odor or noise comes from the BHT, immediately turn off the power and remove the battery cartridge from the scanner case.
• If the LCD screen is broken by mistake, care must be taken not to get the liquid crystal into your eyes or mouth or drop it on your skin.
• Be careful of broken glass if the LCD screen is accidentally cracked or broken. It may cause bodily injury. If the LCD screen is accidentally broken and liquid crystal gets into your eyes or mouth, wash it off immediately with clean water and then seek medical care. Never stare into the reading window.

Handling battery
Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion.

• The battery is exclusively for the BHT. Do not use the battery for purposes other than charging the BHT.
• To charge the battery, be sure to use the specified charger, the charging cable, or the recommended wireless charger.
• If abnormal odor, heat, discoloration, deformation or any other abnormal conditions are noticed when the battery is in use, being charged, or is in storage, remove it from the BHT or charger and avoid further use.

Handling the scanner using a laser light

• The 2D Code Handy Terminal uses laser light for indicating the scanning range. The intensity of the laser light is too low to inflict bodily injury. However, do not stare into the beam. You must observe the following precautions when handling the BHT equipped with laser light.

1. Never stare into the reading window.
2. Never point the reading window at someone’s eye.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
[BHT-M70 series]

• LASER LIGHT-DO NOT STARE INTO THE BEAM.CLASS 2 LASER PRODUCT.

• LUMIERE LASER- NE PAS REGARDER DANS LE FAISCEAU.
  APPAREL LASER DE CLASS 2

• Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3, as described in Laser Notice No.56, dated May 8, 2019.

To System Designers

• When introducing BHTs in those systems that could affect human lives, develop applications carefully through redundancy and safety design which avoids the feasibility of affecting human lives even if a data error occurs.

CAUTION
Handling the BHT
Incorrect handling of the BHT could cause the generation of heat and smoke from the BHT, and malfunction. Be sure to observe the following to use the device correctly.

• When using the hand strap or neck strap, exercise due care to avoid getting them caught in other objects or entangled in rotating machinery. Failure to do so could result in an accident or injury.
• Keep your ears away from the speaker when a loud sound comes out of it. Failure to do so could lead to hearing difficulty.
• Do not operate the BHT in environments where static electricity can build into significant changes. Doing so could result in malfunction or mechanical failure.
• Avoid dropping the battery cartridge or letting it undergo any strong shock or impact. Doing so could result in malfunction or mechanical failure.
• Do not use the BHT near a wireless transmitter such as a ham radio. Doing so could result in malfunction or mechanical failure.
• Do not touch BHT with oily hands or gloves containing oil such as machine oil and grease. Doing so may cause the deformation and discoloration of a device.
• This product incorporates connectors for microSD cards and SIM cards. Do not insert anything other than these cards.
• Do not insert a card inversely, diagonally and with twisted. If a card is inserted forcibly, this could damage a card or a connector.
• Do not attach a wet BHT or rechargeable battery cartridge to CU. Do not use excessive force when inserting or removing the battery cartridge. Doing so could result in malfunction or mechanical failure.
• Keep magnetic cards such as a cash card or a credit card away from the BHT. Failure to do so could cause loss of magnetic data. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Chapter 1 Please read me first

Please contact your nearest distributor, if using in other countries.
The latest precision manufacturing technology yields LCD panels with an effective resolution of 99.99% or higher. The downside, however, is that up to 0.01% of the pixels can remain permanently dark or lit on today’s state-of- the-art panels. Furthermore, please be aware that individual differences may occur in the screen color and brightness due to the characteristics of the white LEDs used in the LCD display backlight. The Customer shall not modify, reverse compile, reverse engineer, reverse assemble, and or otherwise tamper with our BHT’s firmware.

About This Manual

Due to changes and improvements, the content of this manual may be subject to change without prior notice.
The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent.
Please contact DENSO WAVE if this manual is lost. Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, we kindly ask you to report any questionable descriptions, mistakes or omissions, if any, to DENSO WAVE.

Liability Limitations

DENSO WAVE INCORPORATED (“DENSO WAVE”) does not assume any product liability (including damages for lost profits, interruption of operations, or the loss of business-related information) arising out of, or in connection with, the use of, or inability to use the BHT system software or related manuals.
DENSO WAVE takes reasonable precautions to ensure its products do not infringe upon any patents or other intellectual property rights of other(s), however, DENSO WAVE cannot be responsible for any patent or other intellectual property right infringement(s) or violation(s) arising from any of the following.

1. The use of DENSO WAVE’s products in connection or in combination with other components, products, devices, data processing systems or software not supplied by DENSO WAVE.
2. The use of DENSO WAVE’s products in a manner for which they were not intended nor designed.
3. The modification of DENSO WAVE’s products by parties other than DENSO WAVE.

If it is judged by DENSO WAVE that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the warranty period.

• DENSO WAVE will not bear any responsibility for data that customers have recorded and are received by DENSO WAVE for repair and analysis.

Free/Open source software (FOSS)

This product contains Free / Open Source Software (FOSS.) DENSO WAVE is ready to provide compliant source codes. For details, please contact our dealer or contact the site below. https://www.denso-wave.com/

Chapter 2 States Regulations

Declaration of Conformity for EU
Hereby, DENSO WAVE INCORPORATED declares that the radio equipment type BHT- M70 is in compliance with Directive 2014/53/EU. BG DENSO WAVE INCORPORATED, BHT- M70 2014/53/.
https://www.denso-wave.com/en/adcd/download/category/document/

5250 — 5350 MHz (W53: 5.3 GHz Range)
5470 — 5725 MHz (W56: 5.6 GHz Range)| W52:  200 MW e.i.r.p.
W53: 200 MW e.i.r.p.
W56: 1000 MW e.i.r.p.
Mobile Phones (GSM)| 873 — 915 MHz (ER-GSM 900)
876 — 915 MHz (R-GSM 900)
880 — 915 MHz (E-GSM 900)
890 — 915 MHz (P-GSM 900)
1710 — 1785 MHz (DCS 1800)| 2 w
2 w
2 w
2 w
1 w
Mobile Phones (W-CDMA)| 1920 — 1980 MHz (Band 1)
880 — 915 MHz (Band 8)| 250 MW
Mobile Phones (FDD-LTE)| 1920 — 1980 MHz (Band 1)
1710 — 1785 MHz (Band 3)
2500 — 2570 MHz (Band 7)
880 — 915 MHz (Band 8)
832 — 862 MHz (Band 20)| 200 MW

Netherlands

VIETNAM: RoHS Complying with “CIRCULAR, No.30/2011/TT-BCT (Hanoi, August 10 2011), Temporary regulations on the content limit for certain hazardous substances in electrical products”