maxell TW173B TWS Earphone User Manual
- June 6, 2024
- Maxell
Table of Contents
SYNC UP
True Wireless
B13-TWS
FCC ID: WKA-TW173B
User Manual
Specification:
Chipset Solution: AB5376A2
Driver Size : 10mm
Impedance : 16 Ohms
Battery Capacity :
Earbud: 30mAh
Charging Box: 300mAh
Play Time : 3 hours + 9 hours in total with charging case
Power Input: 3mW
Speaker Output: 3mW
Charging Time Earbuds: 1.5 Hrs for a full charge – Charging Time Case: 1.5 Hrs
for a full charge
Working Voltage and Ampere: 5V -, 24/240mA
The function instructions for the charging case:
| 4LED =75% t0 100% charged | 1LED = 25% charged |
|---|---|
| 3LEDs = 50% to 75% charged | 0LEDs = 0% charged |
| 2LEDs = 25% to 50% charged |
Charging the Case:
To charge the case plug in the micro USB cable and connect to a computer or
wall charger. When fully charged, the battery life indicator will show four
blue dots.
*Using for the first time: It is recommended to fully charge the earbuds in the charging case, for up to 2 full hours.
The function instructions for the earbuds:
Charging the Earbuds:
Place the earbuds in the charger. The earbud LEDs will be a solid red when
charging. The LEDs will turn off when they are fully charged.
When both earbuds are fully charged, the charging case will turn off the
charging function automatically and turn to standby.
PowerON:
The earbuds will automatically turn on, once removed from the case.
PowerOFF:
Earbuds will automatically turn off, once you put them back into the case.
Pairing a new device:
Remove the earbuds from the case, then place the earbuds back into the case. Remove again and this will automatically turn the earbuds on. The flashing red and blue LEDs indicate that you are now in pairing mode. Now go to your device’s Bluetooth list and select “Sync Up” to get connected. No need to pair again, your Bluetooth device will auto-connect to the earbuds for all future use.
Earbud Controls:
Earbud Controls:
Pause/Play Music: Press the power button on either bud once
Volume +: Press the power button for two seconds on the Left Bud
Volume -: Press the power button for two seconds on the Right Bud
Next Track: Double press the power button on the Right Bud
Previous Track: Double press the power button on the Left Bud
Take and End call: Press the power button on either bud once
Reject a Call: Press the power button on either bud twice and hold. Once
rejected your music will automatically resume.
Solo:
You can use either bud separate in solo mode, just in case you want to hear
and be aware of your surroundings. Just place either earbud back into the case
and that earbud will turn off. The other earbud will remain on and playing.
WARRANTY INFORMATION:
Maxell warrants this product to be free from all defects for a period of 90 days from the date of original purchase. This Warranty does not apply to normal wear or damage due to accident, abnormal use, misuse or neglect. This Warranty only applies to personal and individual use of the product and not for commercial, institutional or any other use. Any defective item will be replaced, at no charge, upon reasonable confirmation by Maxell of its defective condition, if returned with proof of purchase to an authorized Maxell dealer or directly to Maxell Warranty Replacement, 3 Garret Mountain Plaza, Suite 300, Woodland Park, New Jersey 07424. Neither Maxell nor any authorized Maxell dealer shall be liable for consequential damages arising from this Warranty unless otherwise provided by law.
FCC INFORMATION:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>