MONSTER MH22106 Clarity 108 ANC Airlinks Wireless Earbuds User Guide
- June 6, 2024
- Monster
Table of Contents
MONSTER MH22106 Clarity 108 ANC Airlinks Wireless Earbuds User Guide
Quick Start Guide
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
In-ear Earphone x 2 (left & right)
Charging Case
USB-C Charging Cable
Ear Tips × 3 pairs (M size installed)
Quick Start Guide and Warranty Letter
- Multi Function Button（MFB）
- Microphones
- Ear Tip
- Pair/Reset Indicator Light
- Pair/ Reset to Factory Settings Button
- Charging Case Indicator Light
- USB-C Charging Port
Power On/Off
Earphones will turn on when charging case is opened. To turn off, place the earphones in the charging case, charging will start when cover is closed.
Charging Case Charging
Connect the USB-C cable (included) to the charging port. The charging case indicator light will turn on while charging and off when fully charged.
Noise Cancellation On/Off
Press and hold the multi-function touch button of the right earphone for 2 seconds to switch between different modes. [Noise Cancellation On] – [Ambient On] – [Noise Cancellation Off]
Pairing
Left and right earphones will turn on and connected automatically when
charging case is opened, “pairing” voice prompt will be heard.
For new device connection, go to Bluetooth settings on your device and search
for new devices (new Monster device),
“connected” voice prompt will be heard once the earphones are paired.
When turning on, the earphone will try to connect the last connected device.
To pair a new device, turn off the current connected Bluetooth device.
Connect other devices
Open the cover of the charging case, keep the left & right earphones in the charging case, press and hold the Pair/ Reset to Factory Settings Button for 5 seconds until the Pair/Reset Indicator Light flashes, the earphones will enter pairing state, and the new device pairing on the device Bluetooth interface will then complete.
Volume Control
This earphone does not have a volume adjustment function. To adjust the volume, after the Bluetooth earphone is successfully connected to the device, use the volume adjustment button on the device to increase or decrease the volume.
Call
Answer / End a call: Single tap the MFB.
Reject the call: Press and hold the MFB for about 2 seconds.
Music
Play/Pause music: Single tap the MFB.
Previous song: Double-click the multi-function touch button of the left
earphone.
Next song: Double-click the multi-function touch button of the right earphone.
Voice Control
When the earphone is connected to the phone, press and hold the multi-function touch button of the left earphone for about 2 seconds to enable or disable the voice assistant.
Reset
Open the cover of the charging case, keep the left & right earphones in the charging case, press and hold the Pair/ Reset to Factory Settings Button for 10 seconds, the Pair/Reset Indicator Light will flash slowly, indicating the earphones are restored to factory settings.
Indicator / Voice Prompt Guide
Cautions
- After removing the earphones from the charging case, without pressing any buttons, the left and right earpieces will connect automatically. When no connections found, it will enter automatic pairing mode.
- Please place the earphones in the correct location (L/R) for normal charging.
- Replacement of battery (on your own) is not recommended.
- Do not expose battery (battery pack) to excessive heat such as direct sunlight or fire.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2AVD2-MH22106
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>