DCPLSCA 6 iNCH Regressed Gimbal Downlight

0ÿ2345678ÿ9
3

DCPLSCAÿÿÿÿÿ ÿ!”#ÿ$%&ÿÿÿ#ÿÿ'()ÿÿ +ÿ,ÿÿ”#ÿ”!ÿÿ+(ÿ$-./0123140%0&ÿÿ’!ÿ (!(!ÿ+(5ÿ ÿÿÿÿ !6ÿ(!+ÿ+6ÿÿ!ÿ !!#ÿ,+)ÿÿÿ+ÿÿ 7( !ÿ07ÿ(ÿ+!ÿÿ$89:&5ÿ %ÿ1)2ÿ+(5ÿ0);ÿ<=>ÿ!ÿ+(5ÿ;ÿ8ÿ,ÿ!#5ÿ;/ÿ?ÿ+ÿ!7 ++ÿ!#ÿ$-.@8&5ÿÿÿ(A”ÿBCÿ!,+)
0D0ÿEF863G
H%ÿ 7( !ÿ07ÿ89:5ÿ+ÿ+ÿÿ,+ÿÿÿ((+ÿ (!+! I Jÿ,!K+#Lÿ;/ÿ8=> HM!6″ÿ'”Lÿ4)/ÿNÿÿ)OÿNÿ$:!ÿ4)/ÿNÿÿ0)PÿN5ÿÿÿ+ÿ!ÿÿÿ.3ÿ (!,!+ÿÿÿ”!)ÿ:!ÿ0)/ÿNÿÿ)OÿN5ÿÿÿ(!,!+ÿÿ !)& HQ!(!Lÿÿ(ÿ ÿÿ$QM8&ÿ!,+ H%ÿ.3ÿ,! I 9(ÿÿ%ÿ1)2ÿ I :(ÿÿ1 Mbit/s is RF data rate
I %ÿ’+ÿ+!#(ÿ!ÿ$@%-&ÿ! !ÿ+!#( I C!ÿQ9ÿÿÿ0)1ÿÿ”

ÿÿÿÿ!”

$%ÿ&”()*67)+,8

-.ÿ/01ÿ234 -.ÿ343254 -.ÿ2676ÿ444

ÿ
ÿ7
6
8
ÿ5
88ÿ6ÿ77
ÿ”#$ÿ%&’ÿ(‘&$ÿ’)ÿ+,$ÿ&+%”ÿ#ÿ-ÿ..ÿ+,ÿ$#/+,01 “2ÿ ÿ3+.2,$+’,$ÿ45ÿ6ÿ7ÿ6ÿ89ÿ#(2ÿ1:;1<=ÿ..ÿ6ÿ<:;1=ÿ..ÿ6ÿ->:;1=ÿ..1ÿ”2ÿ ?@ÿ%”+/A,2$$ÿ+$ÿ;1B:;1<ÿ..1ÿC+0D(2ÿ-E<ÿ$”‘&$ÿ%”2ÿ ÿ+,$1
F
ÿGÿ0123ÿ8

ÿ7
6
ÿÿ5
7

16
ÿÿ0123ÿ7
6
ÿ8

ÿ

ÿ 1

!”7

$%&

‘()

*+,-.+,/ÿ,/1/2ÿ3456ÿ.7487ÿ41ÿ+8249/ÿ+2ÿ+ÿ:;.ÿ:/9/:ÿ +5-ÿ41ÿ8;55/82/-ÿ2;ÿ345ÿ<=ÿ;5ÿ27/ÿ’>

< ?@> ?’ #<AB42ÿ?@>6ÿ.7487ÿ41ÿ8;55/82/-ÿ2;ÿ345ÿ<Cÿ;5ÿ27/ÿ ‘>

D E> ‘() E>

C &FG@ ‘() HI’)6ÿ.7487ÿ41ÿ8;55/82/-ÿ2;ÿ345ÿ<ÿ;5ÿ27/ÿ’>

;JJ;5ÿ'()6ÿ.7487ÿ8+5ÿB/ÿK1/-ÿ+1ÿ+ÿILMÿ = &FG@< ‘() ;K23K2ÿ;Nÿ27/ÿFO@ÿ-,49/ÿ+5-ÿ41ÿ8;55/82/-ÿ2;ÿ345ÿD#ÿ
;5ÿ27/ÿ’>

;JJ;5ÿ'()6ÿ.7487ÿ8+5ÿB/ÿK1/-ÿ+1ÿ+ÿILMÿ P &FG>D ‘() ;K23K2ÿ;Nÿ27/ÿFO@ÿ-,49/ÿ+5-ÿ41ÿ8;55/82/-ÿ2;ÿ345ÿ<Dÿ
;5ÿ27/ÿ’>

;JJ;5ÿ'()6ÿ.7487ÿ8+5ÿB/ÿK1/-ÿ+1ÿ+ÿILMÿ &FG>< ‘() ;K23K2ÿ;Nÿ27/ÿFO@ÿ-,49/ÿ+5-ÿ41ÿ8;55/82/-ÿ2;ÿ345ÿ<<ÿ
;5ÿ27/ÿ’>

Q R@@GS?& I I;./,ÿ1K33:Tÿ345ÿUDVDÿRW

X HE@ I I;./,ÿ1K33:Tÿ,/N/,/58/ÿY,;K5-ÿ345

Z &FG>Z ‘() HI’)6ÿ.7487ÿ41ÿ8;55/82/-ÿ2;345ÿ<Zÿ;5ÿ27/ÿ’>

%L% ’53K2 I,;Y,+JJ45Yÿ3456ÿ.7487ÿ41ÿ8;55/82/-ÿ2;ÿ345ÿ=ÿ;5ÿ 27/ÿ’>

ÿ

ÿ 1

7

!”#$ %&’ ()%’*ÿ,-./-ÿ.0ÿ/1223/435ÿ41ÿ6.2ÿ7ÿ12ÿ4-3ÿ%8

81;;12ÿ%&’*ÿ,-./-ÿ/<2ÿ=3ÿ>035ÿ<0ÿ<ÿ)?@ÿ 7 !”9: %&’ 1>46>4ÿ1Aÿ4-3ÿ!BCÿ5D.E3ÿ<25ÿ.0ÿ/1223/435ÿ41ÿ6.2ÿ:ÿ
12ÿ4-3ÿ%8

81;;12ÿ%&’*ÿ,-./-ÿ/<2ÿ=3ÿ>035ÿ<0ÿ<ÿ)?@ÿ : !”9F %&’ 1>46>4ÿ1Aÿ4-3ÿ!BCÿ5D.E3ÿ<25ÿ.0ÿ/1223/435ÿ41ÿ6.2ÿFÿ
12ÿ4-3ÿ%8

F

!”9G

%&’

H3D.<Iÿ.243DA</3ÿD3/3.E.2Jÿ6.2ÿKL#M ÿMNO*ÿ,-./-ÿ.0ÿ /1223/435ÿ41ÿ6.2ÿGÿ12ÿ4-3ÿ%8

P

!”9

%&’

H3D.<Iÿ.243DA</3ÿ4D<20;.00.12ÿ6.2ÿKL#M ÿNO*ÿ ,-./-ÿ.0ÿ/1223/435ÿ41ÿ6.2ÿPÿ12ÿ4-3ÿ%8

Q143R S ÿ.25./<430ÿ61,3Dÿ0>66ITÿ6.20ÿÿ.25./<430ÿ.26>4&1>46>4ÿ6.20ÿ<25ÿUÿ.25./<430ÿ<2<I1Jÿ
.26>4ÿ6.20S S %AÿT1>ÿ-<E3ÿ063/.<IÿD3V>.D3;3240ÿA1DÿI.J-4ÿ/1I1D0ÿ/124D1II35ÿ=Tÿ)?@ÿ1>46>40*ÿ/124</4ÿ

T<ÿ=>0.2300ÿ63D01223IS

2ÿ
76
ÿ66
7
8

2ÿ8
7
ÿ
76
ÿ66
7
8

16
ÿ2ÿ8
7
ÿ

76
ÿ66
7
8

66
7
5
87 6
ÿ66
ÿ7

!

“#$%&'(ÿ #(*+(%&#,%(

-./

0/1 23

433

5$6(%ÿ!,++78ÿ 9$7#&'(

-1:;

;: 4

“#&#<=ÿ(7(=#%<=<#8ÿ9$7#&'(ÿ >?,&@ÿA$B8ÿ$B(7C

&*AÿDÿE/23

FGH

E I4

“#&#<=ÿ(7(=#%<=<#8ÿ9$7#&'(ÿ >&=?<@(ÿ$B(7C

&*AÿDÿE/23

FGH

1:/ I4

2Jÿ
76
ÿKL78

16
ÿ2JÿM6
ÿ

76
ÿL78

66
7
5
87

ÿ 1N6 6

ÿ6

6ÿ 6

7

&

O$%I<@’ÿ #(*+(%&#,%(

-E1

FGH

P/

23

433

O$%I<@’ÿ 9$7#&'(

E:P

;:;

;:.

4

4QR QGSÿ?<‘?T 433ÿUÿ1:V FGH 433 4

66
7
5
87

ÿ 16 6
ÿ6

6ÿ 6

7

ÿ!”#$

%&’

()&ÿ+, ÿ#$”#$

%–

.)/ %00ÿ1ÿ2 %

%&3

()&ÿ4 54, ÿ*#$”#$

%00ÿ1ÿ26

.)/

%00

%

272ÿ89:ÿ;
7

16<
ÿ2=2ÿ;
7ÿ>:ÿ8767ÿ76888ÿ6>ÿ

?:

@<

5
87

16ÿ 6

7

($1

0!A$B!$ÿ$CB!ADAA!EÿÿFGDÿ #$”#$ÿ”+C

H2I

D/

(C1 0*!A$B!$ÿCJ!5

H2K D/

(L0 0!!J$Fÿ$ÿBÿDA4ÿ!$+*CM I2N D/

(F”A”

L”ÿA”ÿD*FÿÿOHÿPGÿ Q/RÿAÿCACF2S

2T

UV

(F”A”T

L”ÿA”ÿDFÿTÿO.ÿQ/Rÿ AÿCACF2S

2N

UV

ÿ
ÿ
67
8

ÿ068ÿ
ÿ
67
8

16
ÿÿ068ÿ
ÿ
67
8

66
7

5
87

!”#$%ÿ'(#) *+,ÿ-./ÿ012ÿ'(#)

34566ÿ67(#)() 89:ÿ;+<

=(7(ÿ7(#6>4664?#ÿ(7 ÿ2’47@6ÿ

A#7##(ÿ7%B C#’?()ÿDE8ÿ(#7##(ÿ

Fÿ
ÿG77ÿH

16
ÿFÿH
ÿIJÿ8767ÿ76888

66
7

Kÿ L6

1M6ÿ L6

K6Nÿ L6

O7

AP(QÿRÿ?”7B”7ÿB?S T** < <+; )8>

*<ÿ)8ÿ>?)”5(74?#ÿ64Q#(5ÿ ‘(#)S4)7UÿVÿ2’47@6W

X@A

*;<<

X@A Y./

<ÿ)8ÿ>?)”5(74?#ÿ64Q#(5ÿ ‘(#)S4)7UÿVÿ2’47@6W

X@A

,<<

X@A Y./

2ÿÿÿ
877

16
ÿ
2ÿÿ8
877

66
7

ÿ 1!6 6
ÿ6

6″6
ÿ #7

ÿ%&'()* +), -./01 +),

23ÿ45'(‘6′(7

89:

ÿ%&'()* +), -. +),

ÿ%&'()* -1; +), <=;;

?4@A45B7ÿCDD*4(

EFG

ÿ%&'()* -=;; +), <;;

HCIBJK554Lÿ’5(4?D4?45B4ÿ *AMM?4**’C5

+),

+),

-;

+), 89

NÿO7
6ÿPQR67R
NSÿO7
6ÿ1

DCPLSCAÿA4ÿK5ÿC5&CK?8ÿVH9ÿK5(455K0
NWÿO7
6ÿP7
Q

!
ÿ
X!7R
TCÿ45A?4ÿCM(‘:KLÿ2>ÿM4?DC?:K5B4Yÿ'(ÿ’ÿ?4BC::45848ÿ(JK(ÿ(J4ÿK5(455Kÿ&4ÿK(ÿL4K(ÿ1ÿ::ÿ KZK7ÿD?C:ÿC(J4?ÿ:4(KLÿMK?(0ÿ[Dÿ:4(KLÿ:K(4?’KL*ÿK?4ÿZ?KMM48ÿK?CA58ÿ(J4ÿK5(455KYÿ(J4ÿ Z’?4L4*ÿ’5KLÿZ’LLÿ&4ÿ?48AB48ÿ?4K(L7Yÿ84(4?’C?K(‘5ÿ(J4ÿ2>ÿM4?DC?:K5B40ÿ94BKA4ÿDCPLSÿCA ‘ÿ’54?(48ÿ(Cÿ(J4ÿVH9YÿADD’B’45(ÿMKB4ÿ5448ÿ(Cÿ&4ÿ?44?648ÿDC?ÿ(J4ÿK5(455K0

ÿ66ÿ67ÿ6ÿ7ÿ8778

ÿ
966ÿ5
88

ÿ
ÿ0123ÿ
966ÿ
88 !”#$%ÿ ‘($ÿ)$+,-#ÿ)./$01.”0+-ÿ#”-$2+03$ÿ.1ÿ4567ÿ//8ÿ+0)ÿ#($ÿ#”-$2+03$ÿ”2ÿ1″/$ÿ /$+1,2$/$0#1ÿ.1ÿ456ÿ//6ÿ9ÿ+ÿ3,1#”/$2ÿ(+1ÿ”#($2ÿ2$:,.2$/$0#18ÿ3-$+2-;ÿ1<$3.;ÿ#($/ÿ.0ÿ

($ÿ)+#+1($$#ÿ+*#$2ÿ3″//,0.3+#.”06

ÿ7ÿ8778
“+-ÿÿ#.ÿ,!+”%ÿ#$ÿ/%)'(&)ÿ0’ÿ&ÿ(%+(.)ÿÿ1”ÿ.&ÿ'(+ÿ&’ÿ%,+&$#ÿ)ÿ+#’ÿ’%2ÿ'(,ÿÿ’,&ÿ'(#ÿ(ÿ1).$&ÿ/&.,+ÿ)$ÿÿ'(‘ÿ 3%+&.#,ÿ41ÿ’ÿ”5ÿ6ÿ'(%+ÿ&+&,ÿ#+$%2ÿ'(ÿ&,+$ÿ7)ÿ82ÿ'(ÿ&,+$ÿ31.ÿ&+’)7ÿ 9: !”ÿ#$%&’ÿ;+)#&’ )ÿ<1$/ÿ$,.)7ÿ&%() ))ÿ=+’&’,ÿ#’)%$ÿ)#%’)ÿ9=>4:ÿ;+)#&’ )))ÿ?@@$ÿ/)'(ÿÿAÿ&&ÿ’ÿBÿ&&ÿ,)&’. 90:82)7ÿ;+)#&’ )ÿC3)’ÿ6 ))ÿ=’)D”)%ÿ(‘D.)”ÿ’.- )))ÿ=’)D”)%ÿ(‘D.)”ÿ7$6
0 ‘.7ÿ%,)’)ÿ1.ÿÿ,$)6.,ÿ&,+$ÿ.ÿÿ1$$/E 9:”(ÿ&)’+.D#.*1ÿ37ÿ)ÿ#$%,ÿ)ÿÿ6).&’ÿ/(.ÿ'(ÿ’&#.’+.ÿ)ÿ 3$/ÿFGHCÿ,ÿ'(ÿ.$’)6ÿ(+&),)’-ÿ)ÿ$/.ÿ'(ÿIGJ 90:”(ÿ($1ÿ$)1ÿ1ÿÿ,.-D#%27,ÿ#.,+%’ÿ)ÿ)Kÿ&'(ÿ1.&ÿ'(ÿ,’ÿ/(ÿ'(ÿ

.,+%’ÿ)ÿ#%27,ÿ,ÿ$, 9F:”(ÿ#%27ÿ%’)ÿÿ(+&),)’-ÿ),)%’*.ÿ%.,ÿ9L4C:

MN
ÿ
OÿPQÿRÿ0123

ÿÿÿÿÿÿÿÿ!ÿ!”ÿ#ÿ$%ÿ”ÿÿ$%&’ ()ÿ”ÿ
+,ÿ-+,ÿÿ+ÿ%./%ÿ/ÿ,ÿÿ”ÿÿ/ÿ0ÿ%%.1ÿ “/ (0)ÿ”ÿ
+ÿ%./%ÿ.ÿ$.,ÿÿ”ÿÿ/ÿ-ÿ%%.1ÿ”/ (
)ÿ”ÿ
+ÿÿ-+ÿ%./%ÿ/ÿ$.,ÿÿ”ÿÿ/ÿ2ÿ%%.1ÿ”/ (-)ÿ”ÿ
+,ÿ-+,ÿÿ+ÿ%./%ÿ/ÿ$.,ÿÿ”ÿÿ/ÿ0ÿ%%.1ÿ “/
– .&ÿ.&’ ().&ÿ$//’ÿ034 (0)5/ÿ$//’ÿ
4 (
)678ÿ$%ÿ/#ÿ$//ÿ /ÿ/ÿ%.&’ÿ9ÿ
24 (-):/ÿ ÿ/#.&ÿ.’ÿ ();.&ÿ%..’ÿ8″ÿÿ.ÿÿ/ÿ!.”.ÿ0ÿ”/ÿ /ÿ.&
<ÿÿÿ678ÿÿ$/%ÿÿ”ÿ”1ÿ$%ÿ/ÿ1/ÿ”/ÿ”ÿ =%/ÿ.%ÿ./.ÿ&ÿ(=:>)ÿ.ÿÿ/ÿ”ÿ?ÿÿ”ÿ/ÿ$ÿ/ÿ @$ÿÿ”ÿ./ÿ/ÿ1/ÿ”/ÿ”,ÿ”#ÿ!.ÿÿ@..Aÿ1/#ÿÿ/#ÿB.ÿ /ÿ/ÿ.$ÿ#ÿ%%/ÿ8#ÿ.ÿÿ.ÿ/ÿ%”ÿ$/ÿÿ%C%
2 /ÿ678ÿ$%,ÿÿ%/.%ÿ.%”/&ÿ(=6<)ÿ$/%.1ÿ/ D 8ÿ/%ÿ”ÿ/!ÿ%ÿ/,ÿ/!ÿ+ÿÿ”ÿ$/%ÿ/ÿ1.ÿ.$%.ÿÿ
5Eÿ/ÿ./ÿ678ÿ$%ÿÿ/.ÿÿ$/$/ÿ1ÿ$//ÿÿ %$ÿ$%ÿ”ÿ</!ÿÿÿÿÿ1/#ÿ”/ÿ/ÿCÿ %”ÿ/ÿ1.ÿ.$%.ÿÿ5E
FG2ÿH
IJKK
LM
MÿNO
Lÿ1
KP
Q67RQ
ÿSRQO

?//ÿ678ÿ$%ÿÿÿ”ÿ!.&ÿ/!ÿ1ÿ$//ÿ%/1ÿ8″ÿ “.&”ÿ$//ÿ.ÿ0-4 ÿÿ”ÿ?TU=<=ÿ/,ÿ$//ÿ/!ÿ/.&ÿÿÿÿÿÿ!.%

ÿ2ÿ
ÿ7

67
ÿ

ÿÿ6ÿ6ÿ67

ÿ6ÿ6ÿ67

7ÿ
ÿ !” 6ÿ #$
ÿÿ #$
ÿÿ&

ÿ
79
8ÿÿ 68ÿÿ%69ÿ %69ÿ&

ÿ6 0′

()*+

*,– ./00120ÿ4/52ÿ/67ÿ <–

=

0228ÿ5/9:16;

Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 1. List of applicable FCC rules FCC Part 15 Subpart C 15.247 & 15.209
2. Specific operational use conditions The module with BLE Operation Frequency: 2402-2480MHz; Number of Channel: 40 Channel Modulation: GFSK Type:PCB Antenna Gain: 2.5dBi. The module can be used for mobile or portable applications with a maximum 2.5dBi antenna. The host manufacturer installing this module into their product must ensure that the final composit product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operaition. The host manufacturer has to be aware not to provide information
3. Limited module procedures Not applicable. The module is a Single module and complies with the requirement of FCC Part 15.212.
4. Trace antenna designs Not applicable. The module has its own antenna, and doesn’t need a host’s printed board microstrip trace antenna etc.
5. RF exposure considerations The module must be installed in the host equipment such that at least 20cm is maintained between the antenna and users’ body; and if RF exposure statement or module layout is changed, then the host product manufacturer required to take responsibility of the module through a change in FCC ID or new application. The FCC ID of the module cannot be used on the final product. In these circumstances, the host manufacturer will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
6. Antennas Antenna Specification are as follows: Type: PCB Antenna Gain2.5dBi. This device is intended only for host manufacturers under the following conditions: The transmitter module may not be co-located with any other transmitter or antenna; The module shall be only used with the internal antenna(s) that has been originally tested and certified with this module. The antenna must be either permanently attached or employa `unique’ antenna coupler.
As long as the conditions above are met, further transmitter test will not be required. However, the host manufacturer is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).

7. Label and compliance information Host product manufacturers need to provide a physical or e-label stating “Contains FCC ID: 2AQSNDCPLSCA” with their finished product.
8. Information on test modes and additional testing requirements Operation Frequency: 2402-2480MHz Number of Channel: 40 Channel Host manufacturer must perfom test of radiated & conducted emission and spurious emission, etc according to the actual test modes for a stand-alone modular transmitter in a host, as well as for multiple simultaneously transmitting modules or other transmitters in a host product. Only when all the test results of test modes comply with FCC requirements, then the end product can be sold legally.
9. Additional testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for FCC Part 15 Subpart C 15.247 & 15.209 and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the grantee shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
Federal Communication Commission Statement (FCC, U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
IMPORTANT NOTES
Co-location warning: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

OEM integration instructions: This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the external antenna(s) that has been originally tested and certified with this module.
As long as the conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
End product labeling: The final end product must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID: 2AQSN-DCPLSCA”.
Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

ISED Statement

–

English: This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause interference, a

nd (2) This device must accept any interference, including interference that may cause undesired

operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). – French: Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes: (1) l’appareil

ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareildoit accepter tout brouillageradi oélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement. l’appareil numérique du ciem conforme canadien peut – 3 (b) / nmb – 3 (b).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
cet appareil est conforme à l’exemption des limites d’évaluation courante dans la section 2.5 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l’exposition aux champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme Canada limites d’exposition aux radiations dans un environnement non contrôlé.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipementdoit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.

Notice to OEM integrator Must use the device only in host devices that meet the ISED RF exposure category of mobile, which means the device is installed and used at distances of at least 20cm from persons.
Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as ICES 003.
Host manufacturer is strongly recommended to confirm compliance with ISED requirements for the transmitter when the module is installed in the host. Must have on the host device a label showing IC: 10733A-DCPLSCA.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Antenna Specification are as follows: Type: PCB Antenna Gain: 2.5dBi This module is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, otherwise, a Class II Permissive Change (C2PC) must be filed with IC, or a new IC authorization must be applied.
ISED Modular Usage Statement NOTE 1: When the ISED certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use the wording “Contains transmitter module IC: 10733A-DCPLSCA” or “Contains IC: 10733A- DCPLSCA”.
NOTE 1: Lorsque le numéro de certification ISED n’est pas visible lorsque le module est installé dans un autre appareil, l’extérieur de l’appareil dans lequel le module est installé doit également afficher une étiquette faisant référence au module inclus. Cette étiquetteextérieure peut être libellée Contient le module émetteur IC: 10733A-DCPLSCA ou Contient IC: 10733A-DCPLSCA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>