COUGAR ATLAS Power Supply User Manual
- June 3, 2024
- Cougar
Table of Contents
COUGAR ATLAS Power Supply
Introduction
Dear customer:
Thank you for choosing a COUGAR® power supply unit. Before the installation
please read the manual below carefully. If you have any questions, please
contact our customer service:
Warnings and safety notes
Never open the PSU cover. There is a potential danger of life due to high
voltage inside. The PSU should only be opened by an authorized technician. The
manufacturer warranty will be void, if the PSU is opened by an unauthorized
person. Do not work on the PSU or the PC as long as the main voltage is still
connected. Switch the I/O button to position “0” and disconnect the power plug
from the power network. Protect the PSU against moisture. The PSU is suitable
for operation at 100-240V 50-60Hz. The ambient temperature should not exceed
50°. Please pay attention to the power de-rating on all models with a decrease
of 1%/°C starting at an ambient temperature of 25°C. Please ensure that there
is sufficient ventilation of the entire system. Make sure during the
installation of the PSU that the ventilation slots are not covered. Do not
clog the ventilation slots of the PSU. Keep your PC away from direct heat
sources such as radiators. When using an extension cord and/or multiple
sockets pay attention to the maximum through-connection ability in order to
avoid short circuits. If you want to clean your PSU, disconnect the power plug
from the power network and remove it from the PC case. Before the removal make
sure that you are not statically charged, (e.g. through carpets or wool
sweaters).Only clean the PSU on the outside, always using dry cloth, never
water or detergent. During the operation of the PSU pay attention to the
maximum loads. The single loads and the total loads must not exceed to cross
the values shown in the output power table. Avoid the use of adapters, such as
4Pin Molex to 6+2Pin PCI-Express.
Technical details and special features
-
EXTREMELY HIGH EFFICIENCY
Up to 88% of efficiency. -
COMPATIBLE WITH THE LATEST PC-TECHNOLOGY
Created for use with current and next-generation multi-core CPU platforms. -
SUPPORT MULTI-GPU TECHNOLOGY
Supports PCI Express 4.0 next-generation graphics cards with 8(6+2) pin PCI-E connector. -
MASSIVE SINGLE +12V DC OUTPUT
Extreme Performance for Powerful Graphics Systems. -
INTEGRATED AIR INLET DESIGN
Optimal aerodynamic design that provides more silent operation. -
ACTIVE POWER FACTOR CORRECTION (ACTIVE PFC)
PF value up to 99% : Clean and reliable power. -
FULL PROTECTIONS WITH SCP, OVP, UVP, OPP & OCP
Installation/Accessories
Before you begin with the installation, please read the section ”Warnings and safety notes.”For the arrangement only use the supplied screws since these have the correct thread. You need a screwdriver for the correct arrangement. The following parts are included in the delivery:
- Screws for the PSU assembly
- Power cord (Please only use the power cord which is included; low-quality cords can damage your PSU and your PC-system.)
- Brief instruction incl. Information about the warranty
- Place the PSU into its designated place within the case and fix it with the supplied screws.
- First insert the plugs for the mainboard supply (20/24 pin, 4 pin and possibly 8 pin – according to mainboard layout) into the respective slots.
- Connect the disk drives and if necessary the graphics cards to the PSU.
- Close the PC and ensure that the PSU power switch is set to the position “0”.
- Connect the PSU to the power network using the supplied power cord. Using only the power cord provided in the package. Low quality power cord may damage the PSU and PC system!
- Turn on the PSU and then start your PC.
Safety functions
-
UVP (Undervoltage protection)
If the voltages fall below a certain tolerance value on the single lines, the PSU automatically switches off. -
OVP (Overvoltage protection)
If the voltages increase above a certain tolerance value on the single lines, the PSU automatically switches off. -
SCP (Short-circuit protection)
In the case of a short-circuit, this feature prevents damage to the core components of the PSU and its system components. -
OPP (Overload protection)
If the system is oversized and requires more power from the PSU than it can perform, this protection function is activated. -
OCP (Overcurrent protection)
If the current on a single line is higher than indicated,the PSU automatically switches off.
Specifications
Operating conditions
- Working temperature: +10°C ~ +40°C (Please note the de-rating condition in Warnings and safety notes)
- Storage temperature: -40°C~+70°C
- Operating humidity (without condensation water): 20%~85% relative humidity ATLAS
- Storage humidity (without condensation water): 5%~95% relative humidity
Output power
Connectors
Connector | Main | CPU | Peripheral | S-ATA | PCI-E |
---|---|---|---|---|---|
Pin | 24(20+4) Pin | 8(4+4) Pin | 8 Pin | 4 Pin | 5 Pin |
ATLAS 600W | 1 | 1 | 1 | 2 | 6 |
ATLAS 650W | 1 | 1 | 1 | 2 | 6 |
ATLAS 750W | 1 | 1 | 1 | 3 | 8 |
Troubleshooting
WARNING:
Never work on the PSU yourself. Even long time after its deactivation, life-
threatening voltages can still be present in the PSU. Repairs should only be
made by authorized specialists. Working at power sources can lead to life-
threatening injuries. If there is smoke, cable damage or intrusion of liquids
the PSU has to be immediately disconnected from the power network and must not
to be put into operation anymore afterward. Never open the PSU. It contains
components, which can show high voltages even after long periods of
deactivation. Again, repairs should only be done by authorized specialists!
Problem: After the installation of the new PSU the system does not start.
Possible solutions:
- Check the power code and the power supply of the wall socket and/or multiple socket strips. Also, check whether the multiple socket strip can supply the necessary power.
- Check all connections within the PC; maybe not all cables are correctly connected.
- Check the internal cable of the I/O-switch of the PC case to the mainboard.
- Check the components for possible short circuits or defects.
Please also check the other components for compatibility. Often mainboard chipsets are not compatible with all memory and/or graphics card solutions. Contact the manufacturer of the component to get more information. If your PSU still does not function even though you have checked sources of errors mentioned above, please get in touch with our customer service. This product is not to be disposed in the regular household waste and must be brought to a collection point for electrical and electronic devices for recycling. The symbol to the left refers to that and can be found on the product, in the manual or on the packaging. Materials can be recycled according to their description. With the reuse, recycling or other forms of utilization of old devices you make an important contribution to the protection of our environment. Please inquire the appropriate location of disposal from your local administration.
Warranty and information of the manufacturer
For further information of the warranty terms, please read the information of “Guarantee Terms and conditions for COUGAR Power Supply Units (PSU) of the VTE X2-Series”.
Manufacturer contact:
Compucase Enterprise Co.,Ltd.
No.225, Lane 54, An Ho Road, Sec.2, Tainan,
Taiwan
+886-6-356-0606」
More information you will find at cougargaming.com Compucase Enterprise
Co.,Ltd. All rights reserved.
Legal notices
This manual was created by COMPUCASE ENTERPRISE CO., LTD. and may not be
completely or partially copied, passed on, distributed or stored without
written consent by COMPUCASE ENTERPRISE CO., LTD. COUGAR is a registered brand
of COMPUCASE ENTERPRISE CO., LTD. Other product and company names mentioned in
this documentation may be brands or trademarks of their respective owners.
COMPUCASE ENTERPRISE CO., LTD. reserves the right to make changes concerning
the contents of the manual and the technical data of the product without a
previous announcement.
Guarantee Terms and conditions for COUGAR Power Supply Units (PSU) of the VTE X2 Series
Where the product warranty according to local laws and regulations extends to
less than 24 months after the date of purchase, Compucase will provide an
extended limited warranty starting the day in which the implied warranty
(according to local laws and regulations) ends and finishing 24 months after
the date of purchase. If the local laws and regulations establish a warranty
period of 24 or more months, no extended limited warranty shall be provided.
During this period, defects in material or workmanship will be repaired or
restored with spare parts. In case of a guarantee service, the customer should
claim the COUGAR PSU at the retailer, where the PSU was bought, accompanied by
a copy of the invoice and an error description. Compucase will only support
directly if the retailer is not reachable repeatedly. In case of direct
support by Compucase , the end user has to assure that the goods are packed
properly and that he is in charge of all transportation costs.
Compucase’s warranty does not cover any of the following:
- Damages due to acts of nature (e.g. Lightning, Water, Fire and so on)
- Accessory or consequential damages that happened by using or not using the PSU
- Damages caused by misuse of the PSU or caused by negligence
- Loss of information or data, software or applications
- Damages caused by opening or modifying the PSU without previous accordance
- Damages caused by using or installing the PSU under conditions outside of the technical specifications which are described in the attached manual
This warranty is valid only for the first end user or consumer and is restricted to the above-named period.
www.cOugargaming.com COUGAR USA Technical
Service
Tel: (833) 256-3778B
Mail: rma@compucaseusa.com
Compucase Enterprise Co. Ltd.
All rights reserved. Made in China
Official website