RugGear RG930i LTE Smart Tablet User Guide

WARNING
Do only change the microSD card when the device is switched off.
Do not try to insert or remove the microSD card when any external power supply is connected, otherwise the microSD card may be damag.

Note:
Make sure that the rubber cover on the earphone and USB connector of the device are fully sealed to ensure complete waterproofing and dustproofing.
No special declaration will be made in the future.

CHARGING

The RG930i supports 5V/2A charging, Only use valid RugGear licensed chargers and cables because unlicensed products may cause the battery to explode or damage the device.
The device must only be charged in an ambient temperature range of +0°C to +45°C. The normal operating temperature of this mobile phone is -10°C to 50°C.

FUNCTION INTRODUCTION

FUNCTION KEY (M1/M2)

Function keys (M1/M2) are custom keys. You can choose and modify the features that you want to. When you use it for the first time, it must be set it in your APP (CustomKey), as below.

Multifunctional Alarm (LWP)

The multifunctional alarm is the feature that detects the status of the mobile phone status during motion and rest and automatically notifies the emergency contact via phone call/SMS.

1. Default password: 1122.
2. After opening the application for the first time, a default phone number is requireed to be set for the alarm.
3. If the mobile phone uses two SIM cards, a default phone number is required to be set for calling/SMS.
   

Take a screenshot

Press the power key and volume key at the same time to take a screenshot.

Indicator light

LED 1 ( Standby indicator ): The blue light is on to show the device is in standby mode.
LED 2 ( Information indicator ): The blue light is flashing to indicate there is a new message.
LED 3 ( Charging indicator):
When the red light is on, the device is charging;
When the green light is on, charging is complete.

RECYCLING

The crossed-out wheelie-bin symbol on the product, battery, literature, or packaging is a reminder that all electrical and electronic products, batteries, and accumulators must be taken to separate collection points at the end of their working life. This requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. Always return used electronic products, batteries, and packaging materials to dedicated collection points. This helps prevent uncontrolled waste disposal and promotes the recycling of materials. More detailed information is available from the product retailer, local waste authorities, national producer responsibility organisations, or your local Power Idea Technology (Shenzhen) Co., Ltd. representative.

INFORMATION CONCERNING CE SAR CERTIFICATION (SPECIFIC ABSORBATION RATE)

The SAR limit of Europe is XXX W/ kg for the head and Body, XXX W/kg for the limbs. The device has been tes ted against this SAR limit. The highest SAR value reported under this standard during product certification fo r use at the ear is XXX W/kg and when correctly worn on the body is XXX W/kg ,limbs is XXX W/kg. This device was tested for typical body-worn operations with the back of the handset kept 5mm from the body. The device complies with RF specifications when used at 5mm from the body. Belt clips, holsters and similar accessories used should not contain metallic components in the assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements,and should be avoided.

TRADEMARKS

All other trademarks and copyrights are the properties of their respective owners.

WARRANTY

• European customers, please check: https://ruggear.com/warranty-terms/
• Customers in the Americas, please check: https://ruggear.com/terms-and-conditions-americas/

A. Safety measures for users and non-users
Non-use of the device in certain situations (while driving) and certain places (airplanes, hospitals, gas stations and professional garages).
Precautions to be taken by wearers of electronic implants (pacemakers. insulin pumps. neurostimulators, etc.) concerning in particular the distance between the device and the implant (15 centimeters) and the position of the device. During the call on the side opposite the implant.
B. Advice for use to reduce the level of consumer exposure to radiation (e.g. Keep the device away from the human body during night rest or set it to flight mode, etc.).
Recommendation of the use of the device in good reception conditions, to reduce the amount of radiation received (especially in an underground car park when travelling by train or car…).
Indication of the parameters for good reception (e.g. display of four or five bars on the screen). Recommendation to use a hands-free kit and, in this situation. Precautions to be taken when Communicating: keep the device away from the abdomen for pregnant women or from the lower abdomen for teenagers.

CE Statement

Herby,Power Idea Technology (Shenzhen) Co., Ltd. declares that this LTE SMART TABLET，RG930i is in compliance with the essentialrequirementsandotherrelevantprovisionsofDirective2014/53/EU.InaccordancewithArticle10(2)andArticle10(10), this product allowed to be used in all EU member states.
Use the LTE SMART TABLET in the environment with the temperature between 0℃ and 45℃ Usecarefulwiththeearphonemaybepossibleexcessivesoundpressurefromearphonesandheadphones can cause hearing loss.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
The product shall only be connected to a USB interface of version USB2.0
SAR: The device complies with RF specifications when the device used at 0mm from your body.
The highest SAR value for this device when tested for use 0.25 W/Kg (10g) for Head; 0.90 W/Kg (10g) for Body 0.50 W/Kg (10g) for Front-to-face; 0.90 W/Kg (10g) for Limbs  5150-5250MHz is restrict to indoor use only.
Adapter shall be installed near the equipment and shall be easily accessible.
The plug considered as disconnect device of adapter Adapter Model: HKC0115021-3D Input: AC 100-240V 50/60Hz 0.5A Output: DC 5.0V, 2.0A
Operation Frequency:
For BT: 2402MHz~2480MHz
For 2.4GWIFI:
2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20))
2422MHz~2462MHz (802.11n(HT40))
For GPS: 1.57542GHz
For GSM:
E-GSM 900/GPRS 900/EGPRS 900:
TX: 880MHz~915MHz; RX: 925MHz~960MHz
GSM 1800/GPRS 1800/EGPRS 1800:
TX: 1710MHz~1785MHz; RX: 1805MHz~1880MHz
For WCDMA:
UTRA Band I: TX:1920MHz~1980MHz;
RX: 2110MHz~2170MHz
UTRA Band VIII: TX: 880MHz~915MHz;
RX: 925MHz~960MHz
LTE Band 1: (UL)1920MHz~1980MHz,
(DL)2110MHz~2170MHz
LTE Band 3: (UL)1710MHz~1785MHz,
(DL)1805MHz~1880MHz
LTE Band 7: (UL)2500MHz~2570MHz,
(DL)2620MHz~2690MHz
LTE Band 8: (UL)880MHz~915MHz,
(DL)925MHz~960MHz
LTE Band 20: (UL)832MHz~862MHz,
(DL)791MHz~821MHz
LTE Band 28: (UL)703MHz~748MHz,
(DL)758MHz~803MHz
LTE Band 34: (UL)2010MHz~2025MHz
(DL) 2010MHz~2025MHz
LTE Band 38: (UL)2570MHz~2620MHz,
(DL)2570MHz~2620MHz
LTE Band 40: (UL)2300MHz~2400MHz,
(DL)2300MHz~2400MHz
For 5G WIFI:5150MHz-5350MHz, 5470MHz-5725MHz, 5725MHz~5875MHz
For NFC: 13.56MHz

Max output power: BT: 0.0021W
UTRA Band I: 0.2014W
LTE Band 7: 0.1479W
LTE Band 34: 0.1671W

2.4G WIFI: 0.0468W
UTRA Band VIII: 0.1959W
LTE Band 8: 0.2443W
LTE Band 38: 0.1493W

GSM 900: 1.8197W
LTE Band 1: 0.1986W
LTE Band 20: 0.2148W
LTE Band 40: 0.1445W

GSM 1800: 0.912W
LTE Band 3: 0.227W
LTE Band 28: 0.2223W
5G WIFI: 0.0282W

Manufacturer：Power Idea Technology (Shenzhen) Co., Ltd.

Address：4th Floor, A Section, Languang Science&technology Building, No.7 Xinxi RD, Hi-Tech Industrial Park North, Nanshan District, ShenZhen, P.R.C
E-mail: [email protected]

Declaration of Conformity
I hereby declare that the

product
Product: Product Name: LTE SMART TABLET
Model: RG930i
Brand Name: RugGear
Hardware Version: V1.0
Software Version: RG930LEEA_1.0.0.0.0_3_20210604(RG930iS23WBE46.11.9301.HB.RO.HP.GHL9.210604.V0.03)

Accessories:
Adapter Information:
Model: HKC0115021-3D
Input: 100-240VAC, 50/60Hz, 0.5A
Output: 5.0VDC. 2.0A
Manufacturer: Shenzhen Huntkey Electric Co., Ltd.
Earphones Information:
Model: EJ0009
Voice Coil IMP: ”164
Sensitivity: -58DB±3DB
Input Power: 2mW
Manufacturer: DONGGUAN ZHANGYUEDIANSHENG CO., LTD
USB Cable Information 1:
Model: TYPE-C USB 2.0
Length: 1M
Manufacturer: FPR Connectivity Technology Inc.,
USB Cable Information 2:
Model: USB 3.0
Length: 1.2M
Manufacturer: Shenzhen Pomagtor Precision Electronics Co.,Ltd
Battery information 1:
Model: BL816WP
Specification: 3.7V, 8160mAh, 30,192Wh
Manufacturer BMZ Company Limited
Battery information 2:
Model: BL816WP
Specification: 3.7V, 8160mAh, 30,192Wh
Manufacturer. BMZ Company Limited

satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/35IEU, 2014/30/EU and 2014/53/EU: EN 623684:2014+411:2017
EN 50663:2017
EN 62479:2010
EN 50566:2017
EN 62209-1:2016
EN 62209-2:2010/A1:2019
EN 50360:2017
Draft
ETSI EN 301 489-52 V1.1.0 (201911)
ETSI EN 301 489-19 V2.1.1(2019.04)
ETSI EN 301489-17 V3.2.4 (2020-09)
ETSI EN 301489-3 V2.1.1(2019-03)
ETSI EN 301489-1 V2.2.3 (2019-11)
ETSI EN 300 328 V2.2.2 (201947)
ETSI EN 303 413 V1.2.1 (202144)
ETSI EN 301 511 V12.5.1(2017-03)
ETSI EN 301 908-1 V13.1.1(2019.11)
ETSI EN 301908-2 V13.1.1(2020.061
ETSI EN 301 908-13 V13.1.1(2019.11)
ETSI EN 301 893 V2.1.1 (20174)5)
ETSI EN 300 440 V2.2.1 (2018-07)
ETSI EN 300 330 V2.1.1 (2017-02)

(Tille(s) of regulations, standards, etc.)

All essential radio test suites have been carried out.

NOTIFIED BODY: PHOENIX TEST-LAB GmbH
Address:
Koningswinkel 10
D-32825 Blomberg Germany
Identification Number: 0700

MANUFACTURER or AUTHORISED REPRESENTATIVE:
Address:
Power Idea Technology (Shenzhen) Co., Ltd.
4th Floor, A Section, Languang Science&technology Building. No.7 Xinxi RD. Hi- Tech Industrial Park North, Nanshan District. ShenZhen, P.R.0

This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorized representative.

Signature:

Xinxi RD, Hi-Tech Industrial Park North, Nanshan District, ShenZhen, P.R.
Tel / Fax| +8618229978564
E-Mail| [email protected]

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SAR Information Statement

Your LTE SMART TABLET is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for LTE SMART TABLET employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the LTE SMART TABLET transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the LTE SMART TABLET while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a LTE SMART TABLET model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this LTE SMART TABLET when tested for use at the ear is 0.45 W/Kg and when worn on the body, as described in this user guide, is 0.72 W/Kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.74 W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this LTE SMART TABLET with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this LTE SMART TABLET is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: QRP AZUMIEXTEND55 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
The SAR test distance is 0mm.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>