RugGear RG750 Smartphone for MCPTT User Guide

: June 12, 2024
: RugGear

RugGear RG750 Smartphone for MCPTT

Product Information

Model: PSM02G
Manufacturer: RugGear
Version: 2022-12-06
Manufacturer Address: 4th Floor, A Section, Languang Science&technology Building, No.7 Xinxi RD, Hi-Tech Industrial Park North, Nanshan District, ShenZhen, P.R.C
Website : www.RugGear.com

Product Usage Instructions

Appearance Diagram

Power Button: When the power is on, long press this key to select Power Off/Restart; Short press it to turn off/turn on the screen.
PTT/Customize Key: Open the specified application/switch quickly with the customize key setting in the system.
Volume Button: Adjust the volume.
USB Interface: Type-C interface for mobile phone charging and data transmission.
Main MIC: Main microphone.
SOS Key: Alarm using one key, which will be used after setting in the multi-function alarm application.
LED Indicators: Instructions for mobile phone status.
Front Camera: Front-facing camera.
Knob: For switching software intercom groups.
Speaker: Built-in speaker.
Return Button/Home Button/Recently Opened Applications Button: Return to the previous menu/return to home screen/display the pending programs set in the background.
Professional Audio Interface: Can connect 13-pin headset/RSM and is compatible with MOTO RSM (PMMN4022A).
Camera Button: In other applications, long press to enable camera function. In camera application: Short press to use the camera function, and long press for continuous shooting.
Flashlight: 4-flashing highlighted flashlight.
Secondary MIC: Secondary microphone.
Rear Camera: Rear-facing camera.
Battery Cover Screw: Rotate anticlockwise to loosen and clockwise to tighten the battery cover.
Pogo Pin for Charging: Connect the desktop charger.

Introduction
This document contains information and safety regulations which are to be observed without fail for safe operation of the device RG750 under the described conditions. Non-observance of this information and instructions can have serious consequences and/or may violate regulations. Please read the manual and these safety instructions before using the device. In case of any doubt, the English version shall apply.

EU-Declaration of Conformity
The EU-declaration of conformity can be found at the end of this manual.

Safety Instructions

Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
Do not use the device in potentially explosive atmospheres.
Only authorized personnel are allowed to repair the device.
Keep the device away from medical equipment, such as pacemakers, as it may affect their proper functioning. Maintain a distance of at least 15 cm between the device and these devices.
Do not use headphones or earphones at high volumes for extended periods to protect your hearing.
Follow local regulations regarding the use of devices while operating a vehicle.
Use a soft, lint-free cloth for cleaning the device.
Avoid using the device in potentially explosive or hazardous locations.
Exercise caution when using the network or other data-exchange functions of the device. The manufacturer cannot be held responsible for any claims arising from such usage.

Warning: The manufacturer will not assume any liability for damages caused by disregarding any of these advice or by any inappropriate use of the device.

APPEARANCE DIAGRAM

RugGear-RG750-Smartphone-for-MCPTT-
FIG-1

Power Button: When the power is on, long press this key to select Power Off/Restart; Short press it to turn off/turn on the screen.
PTT/customize key: Open the specified application/switch quickly with the “customize key” setting in the system. See 10.3 for more details.
Volume Button: Adjust the volume.
USB Interface: Type-C interface for mobile phone charging and data transmission.
Main MIC
SOS key: Alarm using one key, which will be used after setting in the multi-function alarm application. See 10.2 for more details.
LED Indicators: Instructions for mobile phone status. See 9.4 for more details.
Front Camera
Knob: For switching software intercom groups. See 10.1 for more details.
Speaker
Return Button/Home Button/”Recently Opened Applications” Button: Return to the previous menu/ return to home screen/display the pending programs set in the background.
Professional audio interface: Can connect 13-pin headset/RSM and is compatible with MOTO RSM (PMMN4022A).
Camera Button: In other applications, long press to enable camera function. In camera application: Short press to use the camera function, and long press for continuous shooting.
Flashlight: 4-flashing highlighted.
Secondary MIC
Rear Camera
Battery Cover Screw: Rotate anticlockwise to loosen and clockwise to tighten the battery cover.
Pogo pin for charging: Connect the desktop charger.

INTRODUCTION

This document contains information and safety regulations which are to be observed without fail for safe operation of the device RG750 under the described conditions. Non-observance of this information and instructions can have serious consequences and / or may violate regulations. Please read the manual and these safety instructions before using the device. In case of any doubt, the English version shall apply.

RESERVATION

The content of this document is presented as it currently exists. Power Idea Technology (Shenzhen) Co., Ltd. Does not provide any explicit or tacit guarantee for the accuracy or completeness of the content of this document, including, but not restricted to, the tacit guarantee of market suitability or fitness for a specific purpose unless applicable laws or court decisions make liability mandatory. Power Idea Technology (Shenzhen) Co., Ltd. reserves the right to make changes to this document or to withdraw it any time without prior notice. Changes, errors and misprints may not be used as a basis for any claim for damages. All rights reserved. Power Idea Technology (Shenzhen) Co., Ltd. cannot be held responsible for any data or other loss and direct or indirect damages caused by any improper use of this device.

EU-DECLARATION OF CONFORMITY

The EU-declaration of conformity can be found at the end of this manual.

FAULTS AND DAMAGES

If there is any reason to suspect that the safety of the device has been compromised, it must be withdrawn from use immediately.
Measures must be taken to prevent any accidental restarting of the device. The safety of the device may be compromised, if, for example:

Malfunctions occur.
The housing of the device shows damage.
The device has been exposed to excessive loads.
The device has been stored improperly
Markings or labels on the device are illegible.

We recommend that a device displaying errors or in which an error is suspected be sent back to Power Idea Technology (Shenzhen) Co., Ltd. to be checked.

FURTHER SAFETY ADVICE

Do not touch the screen of the device with sharp objects. Dust particles and nails may scratch the screen. Please maintain the screen clean. Remove dust on the screen with a soft cloth gently, and do not scratch the screen.
Do not put the device in environments with excessive temperatures, as this could lead to heating of the battery, resulting in fire or explosion.
Do not charge the device near any flammable or explosive substances.
Charge the device under dry indoor conditions only.
Do not charge the device in environments with much dust or humidity.
Do not use the device in areas where regulations or legislatives prohibit the use.
Do not expose the device or charger to strong magnetic fields, such as are emitted from induction ovens or microwaves.
Do not attempt to open or repair the device. Improper repair or opening can lead to the destruction of the device, fire or explosion. Only authorized personnel are allowed to repair the device.
Only use accessories approved by Power Idea Technology (Shenzhen) Co., Ltd.
Power off the device in hospitals or other places where the use of mobile phones is prohibited. This device may affect proper work of medical equipment, such as pacemakers. Always keep a distance of at least 15 cm between the device and these devices.
Make sure the volume level is not set too high when plugging earphones and headphones to protect your hearing.
Observe all corresponding laws that are in force in the respective countries regarding the use of devices while operating a vehicle.
Please power off the device and disconnect the charging cable before cleaning the device.
Do not use any chemical cleaning agents to clean the device or the charger. Use a damp and anti-static soft cloth for cleaning.
Adapter shall be installed near the equipment and shall be easily accessible.
The product shall only be connected to a USB interface of version USB2.0 and USB3.0.
Do not discard old and abandoned lithium batteries into the trash, send them to designated waste disposal locations.
The user alone is responsible for any and all damages and liabilities caused by malware down-loaded when using the network or other data-exchange functions of the device. Power Idea Technology (Shenzhen) Co., Ltd. cannot be held responsible for any of those claims.

Warning
Power Idea Technology (Shenzhen) Co., Ltd. will not assume any liability for damages caused by disregarding any of these advices or by any inappropriate use of the device.

MAINTENANCE/REPAIR

Please note any legal requirements for periodic inspection. The device itself has no user-serviceable parts. It is recommended to perform inspections according to the safety regulations and advises. If there is a problem with the device, please contact your vendor or consult the service center. If your device is in need of repair, you can either contact the service center or your vendor.

BATTERY

RG750 supports 5V/2A or 9V 2A (QC3.0) charging — using any higher charging current may damage your phone.
( Note : The standard accessory charger is 5V/2A).
Risk of explosion if battery is replaced by an incorrect type. Dispose used batteries according to the instructions.

PREPARATION

Battery Installation and Removal; Nano-SIM Card and Micro SD Card Installation
Rotate the battery cover screw anticlockwise as shown until the battery cover is unscrewed.
Install the Nano-SIM card and Micro SD card in the direction as shown.
After the cards are inserted, press the battery into the battery compartment.
Close the battery cover and rotate the battery cover screw clockwise.
Battery removal: Remove the battery cover first, as shown.

Note:
After installation, please make sure that the headphone and USB port rubber plug of the whole phone are intact and closed to be waterproof and dust-proof. In this regard, no further special statement will be made in later chapters.

Memory Card Installation/Removal:
A memory card must be inserted to store additional multimedia data. This device can accept up to 128GB Micro SD memory card.

Waist Clip Installation

The RG750 Waist Clip can be mounted inward with the battery cover or the display screen as shown.

Charging
Pull out the USB rubber plug in the direction as shown in the figure and connect the cable to this mobile phone to start charging. Only use RugGear wide licensed chargers and cables because unlicensed products may cause battery explosion or damage your device. You can only charge the device at ambient temperature range of +0°C to +45°C. The normal operating temperature of this mobile phone is -10°C to 50°C. It is recommended to use your mobile phone within this temperature range. Instructions for LED Indicators

FUNCTION INTRODUCTION

Knob instructions
The knob can be rotated at any time, including clockwise or counterclockwise rotation.
It can be used to switch between different intercom groups conveniently, and it can support the voice broadcast function.
( Note : Whether or not voice broadcast is supported depends on the PTT software);

Multifunctional Alarm (LWP)
Multifunctional alarm refers to the feature that detects the mobile phone status during motion and rest and automatically notifies the emergency contact via phone call/SMS.

Default password: 1122.
After opening the application for the first time, you need to set a default phone number for the alarm.
If the mobile phone uses two SIM cards, you need to set a default phone number for dialling/SMS.
Any aborted operation will cause the application process to be interrupted and it needs to [close/open] the application again in order to reset the alarm process.
The alarm will not be triggered when the mobile phone is connected to a USB charger.

Alarm trigger mode:

One-button Alarm:
Click the SOS key to directly trigger the alarm process.
Low Battery Alarm:
An alarm is triggered when the mobile phone’s battery drops below 20%.
Motion Alarm:
Vertical tilt 45°:
An alarm is triggered when the angle between the mobile phone and the vertical direction is greater than 45°.
Drop :
An alarm is triggered when the mobile phone is dropped.
Not moving:
An alarm is triggered when the mobile phone does not move for a certain period of time.
Alarm Process:
Trigger alarm – Pre-alarm – Call the alarm phone number – Call the other contact – …… – (sending an SMS link with coordinates to the contact).

PTT/customize keys:
Your phone supports custom buttons, so you can use them to use quick applications.
The main function of the custom button is to quickly open the application you specify. “PTT” in the list means: Long press the custom key to enable software talkback.

RECYCLING

The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. More detailed information is available from the product retailer, local waste authorities, national producer responsibility organisations, or your local Power Idea Technology (Shenzhen) Co., Ltd. representative.

INFORMATION CONCERNING CE SAR CERTIFICATION

(SPECIFIC ABSORBATION RATE)
The SAR limit of Europe is 2.0 W/kg. The device has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.681 W/kg and when properly worn on the body is 1.121 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 5mm from the body. The device complies with RF specifications when the device used at 5mm from your body. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.